Turner BioSystems Modulus II Microplate Multimode Reader with Injector Lab

This listing is for a Eppendorf epMotion 5075 Liquid Handling System.The unit is in full working con (more)dition and is ready for immediate release.This Unit is supplied with PC and accessories.The Eppendorf epMotion 5075 is a sophisticated solution for automating liquid handling tasks, designed to enhance efficiency and accuracy in laboratory settings. Here’s a detailed look at its key features and specifications:Key Features:Accelerated Operational Speed: The epMotion 5075 significantly reduces the time spent on manual pipetting, allowing for faster throughput in critical experiments.Versatile Worktable: With up to 12 deck positions, the system adapts seamlessly to various liquid handling applications, whether you’re doing PCR setup, cell culture, or reagent transfers.User-Friendly Software: Utilizing Eppendorf’s epBlue™ software, the system simplifies the programming of liquid handling tasks. The intuitive software assistant concept means that users can quickly learn to operate the system with only minimal training.Enhanced Decontamination Standards:CleanCap Option: Features UV light decontamination and a HEPA filter for purified air, ensuring high standards of sample safety and contamination control.Optical Sensor Technology: An integrated optical sensor checks labware, liquid levels, and tip counts at the beginning of each cycle, minimizing errors and enhancing reliability throughout operations.Technical Specifications:Model: epMotion® 5075Catalog Number: 5057 SeriesDimensions: 107 x 61 x 67 cm (43 x 24 x 27 in)Electrical Requirements: 110 - 130 V, 50/60 HzType: Automated pipetting and liquid handling systemDeck Capacity: Up to 12 positionsAccuracy:At 1 µL: ±15% or ±5%At 50 µL: ±1.2% or ±0.4%At 1,000 µL: ±0.7% or ±0.15%

Chemagen Chemagic Separation Module I with Software & Accessories This was removed from a unive (more)rsity lab where it was surplus to requirements. Included in the system are; 1 x Chemagic Magnetic Separation Module I10 x Tube Racks :-7 hold 12 x 50ml tubes2 Hold 12 x 15ml tubes1 holds 12 x 0.5ml tubes 1 x Chemagen BiopolymerVulkan TechnicOrder no. 200 03 014The unit powers on but not tested further. 1 x Compaq PCModel - Presario S0000Chemagen/Chemagic Software MSM (Release 5.1.0.6) Installed 1 x DGM MonitorModel - L-1731W 1 x Compaq Keyboard 1 x IBM Mouse All PC equipment powers up and seems to be in full working order. Boxed Accessories:-178 x Genetix Lids (opened)100 x Sealed 96 well 2.2ml storage plates6 x Sealed Nunclon Surface plates10 x Rubber plates5 x 384 well plates (S300RXFL)9 x 96 well 0.1ml slots8 x 100mm Tissue Culture Dishes11 x Chemagen Tubes (PK-400500-036-080403)18 x Microcon YM-100 Regenerated Cellulose38 x 2ml vials17 Packs of MicroAmp Optical Caps (8 caps per strip, 12 strips per pack)25 x Thermo Scientific 0.2ml Skirtled 96 well PCR Plates57 x fisherbrand Dispenser Tips 12.5mlPromega SV96 Total RNA Isolation System2 x Denletstor Metal racks size 38.5 x 15.5cm, 160 squares 1.5 x 15cm each2 x Wash Buffer 6 Bottles (both full) Volume unknown.Promega Vac-Man Laboratory Vacuum Manifold

Dionex ICS-90 Ion Chromatography System with AS-40 Autosampler This was removed from a university l (more)ab where it was surplus to requirements. The system has been professionally serviced. A full report is available on request. It is in good cosmetic condition with minor marks. Included are; Dionex AS40 Automated SamplerModel: AS40-1Serial#: 04050451 Dionex ICS-90 Ion Chromatography SystemModel: ICS-90Serial#: 02040303

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to  (more)requirements. The system powers up but has not been tested further at our facility. The system is in very good cosmetic condition with only minor marks from use. Included are; 1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific 1250 Pump.Set of Accessories

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/2 is designed for weighbridges equipped with terminal TMC series. It is installed in a large distance from the terminal (e.g. next to the barriers). Communication through RS485, power supply 9-24V AC from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing with stainless steel mounting kit. There are two mounting kits offered, depending on model. Intended Use: Designed for weighbridges equipped with terminal TMC series. It is installed in a large distance from the terminal (e.g. next to the barriers). Communication through RS485, power supply 9-24V AC from scale terminal.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.