Beckman Coulter Biomek FX 2 Arm Liquid Handler, Software Cytomat Hotel Lab

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university (more) lab where it was surplus to requirements. All units are in good used cosmetic condition but they do have various signs of general use. The system consists of: 1 x Beckman Coulter Biomek Fxp CAT No A31842.The unit powers up and both lights illuminate Green. It was not tested any further.The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included. 1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.It comes with:2 x Stacker 10 hotels.2 x FX Stacker 10 hotels.1 x Stacker Carousel Pendant.The mounting plate to connect it to the Fxp is included.It also comes with a spare Microscan, operational condition is unknown. 1 x Lenovo PC with monitor, mouse & keyboard.It has the Biomek Version 3.3 software installed. 1 x Jun-Air 1795001 Compressor. The system also includes quite a few plates and consumables and various connection cables.

Beckman Coulter Biomek NX S8 Laboratory Automation Workstation This was removed from a university la (more)b where it was surplus to requirements. The system powers up, communicates with the PC and is in good working order. It is in good cosmetic condition with minor marks from use. Included are; Model - Biomek NX S8SN - 9898860170 Beckman Coulter Biomek Valve unitCat no. 719657SN - 5080667 PC Accessories include:Lenovo ThinkCentre PC - Has Biomek software version 4.1AMW 17" LCD MonitorLenovo keyboard & mouse Box of accessories/consumables includes:-CablesBeckman Coulter Tube Rack (Boxed)Beckman Coulter Image MORBM33A Recovery DVDAcronis True Image 2016 #1 Backup Solution DVDBeckman Coulter Biomek Seal & Sample Aluminum Foil LidsBeckman Coulter SPAN-8 P250 COND.N/S Tips (1 Rack)2 x Beckman Coulter Modular Reservoir Quarter Module 19ml (Cat-372788)Beckman Coulter Modular Reservoir Full Module 150ml (Cat-372784)Beckman Reservoir holder (Cat-372795)Beckman Capstrip (267002)3 x Packs Blue 13mm Inserts (5 Per Pack)3 x Packs Red 12mm Inserts (5 Per Pack)3 x Packs Black 10mm Inserts (5 Per Pack)1 x Pack White 11mm Inserts (5 In Pack)Bag of mixed Tecan syringesBack of 4 gaugesLead Screw with nut (Ref-989458)Elektroden EL8/4V (B-3204021)

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips This was removed from a (more) university lab where it was surplus to requirements. The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand neIt is in good cosmetic condition with minor marks from use. The system includes: Biomek NXP WorkstationSerial No. A318410608 Beckman Coulter FX Device ControllerCat No. 719366Serial No. 00717635AM0718110002 Beckman Coulter AccuframeSerial No. 00717820AG0711110001 ThinkCentre PC with Windows 7Serial No. 1S5852BL2MJWLDN9 Software:Biomek System Install Disk v3.3Beckman Coulter Sami Workstation Software v4.0Beckman Coulter Recovery DVD MORBK29ABiomek Tutorials v3.3Accounts and Permissions v3.1 Additional parts/Accessories:2 x Manuals Biomek NX and NXP v3.3 Tutorial1 x Active Curtain test rodBeckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes1 x Roylan Developments StoragePod Dundee serial No. 000224 15 x 14 x 40cm1 x complete front polycarbonate safety screen kit with all parts and fixings10 x data leads120 x 96 well plates, chimney well TC with lids5 x workstation table fittings9 x microplate holders1 x pipette exchanger holder12 x ferrite cable noise reducers

This listing is for 1 of 3 Serosep EntericBio Workstation.The unit is in full working condition and  (more)is ready for immediate release.The EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system.Key Features and Benefits:Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency.Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling.Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run.Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes.Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing.Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices.User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time.Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

Sanyo MCO-18AC CO2 Incubator This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

This Agilent 1100/1200 Pump Drive Assembly G1311-60001 was removed from a university lab where it wa (more)s surplus to requirements. The item is in good cosmetic condition but has not been tested.

Heraeus Function Line Incubator Type-B12 This item was removed from a university lab where it was su (more)rplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition both internally and externally, however it does not feature an inside glass door.

IKA Pette multi 12 x 20 - 200 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 20 - 200 µl includes: - Two Year Manufacturer's Warranty

VortaMix Mini Vortexer blue V1000 Argos Technologies New equipment in its original packaging Mini bl (more)ue vortex reference V1000B Speed: 3,000 rpm Weight: 0.55 kg Dimensions: 96 x 85 mm Ambient temperature range: 5...40 °C