copy of Digital Hot Plate Magnetic Stirrer AREC 10 Velp with probe, rod and clamp

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and i (more)s ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.

- Storage capacity (cryobox): 150 - Storage capacity (2ml vials): 15,000 - 350 ml plasma bags: 150 - (more) Preset temperature: -82°C - Cold/hot temperature alarm limit: -87°C / -77°C Ultra low freezers, or deep freezers, are devices intended for storing blood and plasma components, human cells, tissues and other laboratory samples at temperatures as low as -86°C. "U" models reflect the highest and most uncompromising requirements with state-of-the-art technology. The cooling system is optimally designed to allow very low consumption and little heat production. Medical device in accordance with MDR (EU) 2017/745, Class IIa directive THE CONTROL PANEL Extremely easy control of all parameters: - 7" color touchscreen display at eye level - Locking mechanism protected by card reader and password - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - B Universal connected software for remote monitoring, recording and long-term archiving - USB port for easy data export - Alarm memory and history on the monitor with indication of the type - Ethernet interface for data management, via B software, to a PC - Backup battery (duration of at least 48 hours) - Optionally, the possibility of passing data to a db through the network. - Monitor indication of: time, input Volt, login status (user level) SAFETY AND TRANQUILITY Accurate temperature and 24-hour storage: The safety standards developed by B Medical Systems define unique technical features, ensuring the safe storage of preparations and setting the highest safety standards for the user. - Controlled air cooling system for a uniform and stable temperature distribution - Automatic defrost while maintaining a stable temperature - Rapid temperature recovery even after numerous door openings - Safety thermostat to prevent freezing - Long range in case of power failure - Audible and visual alarms with remote alert via SMS or email - °B Connected universal software for remote archive, report (according to FDA 21 CFR Part 1) More than certified tools - European regulation on medical devices: MDR (EU) 2017/745, Class IIa (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - EMC Directive: 2014/30 / EU (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - Low voltage directive: 2014/35 / UE (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - FDA-Medical Device Regulations: 21CFR Part 864.9700, Class II (models: 115-127 V - 60 Hz and 220 V - 60 Hz) - CCSAus certified: Yes (models: 115-127V - 60Hz and 220V - 60Hz) - GMP - Clean room classification: ISO class 6 / EC GMP B ISO class 5 / EC GMP A The 'PREMIUM' line provides you with the most advanced tool you can find. The maximum of technology that you will be able to receive in your laboratory or research center, as well as for the pharmacy and hospital. These models will not serve you best today, but for decades they will remain advanced and modern tools. Tens of years of experience in the design, construction and use, in all conditions, have allowed B Medical Systems to be able to create some of the best instruments on the market. By purchasing this instrument manufactured in Luxembourg, you will save energy each day on the time used for your applications, without risking losing your precious samples. Optimized design for energy efficiency - Often polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum Improved structure and built for everlasting durability - Anti-corrosion structure guaranteed for life - Constructed by rotational molding, in high quality polypropylene for better insulation and strength - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times - Double internal door RTMD | DATI SEMPRE ONLINE WANT EVEN MORE CONTROL? As an option, you can connect your B-Medical-Systems devices to the °B CONNECTED online software. Through this software, via PC or smartphone, you will be able to have a complete overview and management of all your B-Medical-Systems instruments. - Real-time data: temperature, set point, component status, compressor data - All recorded data: alarms, temperatures, exceptional events that occurred during refrigeration - Display and settings of all parameters - Graphic display of temperature curves - Easy graphics to monitor all the devices you own - Incredibly interactive - Customizable data printing - Easy setting of specific alarms, via email or SMS alerts - Data export for third party software - Important advantage in terms of costs compared to a traditional circular paper recorder FEATURES OF VALUE EFFICIENCY - High efficiency natural gas compliant with US SNAP and F-GAS - High performance and low consumption compressor - One-piece printed polypropylene chassis guaranteed for life against corrosion and fully recyclable - Superior insulation - Ergonomic handle with special valve to open the instrument with minimum effort. CONVENIENCE AND COMFORT - Easy access to parameters via 7 'touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for better cleaning - Low noise - Low heat emission - Modular interior equipment - Easy access to the internal drawers-trays - Highest quality stainless steel - Minimal ice formation to allow easy defrosting MULTIFUNCTION ELECTRONICS - Maximum reliability - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal '° B Software' connected for remote monitoring, recording and long-term archiving - Electronic temperature recorder - USB port for easy export of recorded data - Data backup battery Versatile and modular - Full compatibility of internal modules and rails - no need to buy new racks, you can keep previously used racks in different U models - Cryo racks optional ... and much more. Download the data sheet for the data of each model, the standard and optional accessories.

Temperature settings: -18°C/-20°C/-22°C/-24°C/-26°C Dimensions (HxWxD): 1850 x 600 x 650 mm Internal (more) dimensions (HxWxD): 1580 x 450 x 360 mm Capacity: 282 L

Planner Kryo 360-1.7 Controlled Rate Freezer-Chamber Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers up. We are unable to test it further at our facility but the lab confirmed it was in full working order prior to removal.

Memmert UN30PA Natural Convection Paraffin Oven 32L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 32 L (1.1 cu. ft.) Features - 32 L (1.1 cu. ft.) internal volume for compact, efficient use - Temperature range from +20°C to +80°C with 0.1°C accuracy - Dual Pt100 sensors ensure precise temperature monitoring and safety - TwinDISPLAY control panel with adaptive PID microprocessor and high-definition TFT-color displays - Natural convection system for stable, even heating without forced air - Programmable with AtmoCONTROL software for USB and Ethernet connectivity - AutoSAFETY system with over- and undertemperature alarms for protection - Fully insulated stainless steel door with secure 2-point locking system The Memmert UN30PA Natural Convection Paraffin Oven 32L, 115V is designed to provide precise and reliable temperature control for laboratory paraffin applications. With a 32-liter (1.1 cu. ft.) chamber capacity, this compact oven offers a controlled temperature range of +20°C to +80°C, accurate to 0.1°C, ensuring stability and consistency. Equipped with dual Pt100 sensors in a four-wire circuit, it guarantees optimal monitoring and safety by taking over in case of any sensor error. The TwinDISPLAY control panel, featuring a digital PID microprocessor and high-definition TFT-color displays, allows for intuitive and flexible temperature and timing adjustments, adapting easily to diverse laboratory requirements. Built for efficiency, the UN30PA employs a natural convection system that delivers consistent heat distribution without forced airflow, making it ideal for delicate paraffin processing. The unit is programmable through the AtmoCONTROL software, compatible with both USB and Ethernet, allowing easy data management and transfer. Safety features include the integrated AutoSAFETY system, offering visual and acoustic alarms for over- and undertemperature protection, as well as a fully insulated stainless steel door with a two-point locking system to maintain internal conditions securely. With its durable stainless steel construction and user-friendly functionality, this oven is a versatile and dependable solution for precise paraffin applications. INCLUDED: TheMemmert UN30PA Natural Convection Paraffin Oven 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Manufacturer: Thermo Scientific / Revco Model: REL404V High-Performance Laboratory Refrigerator P/N: (more) REL404V S/N: 0153683101150722 Description:  The Revco High-Performance Laboratory Refrigerators with Solid Doors from Thermo Scientific are ideal for a variety of space and storage requirements. Each refrigerator features a microprocessor control system, positive airflow systems, industrial-quality cabinet construction, and extra-strength refrigeration compressors that are ideal for industrial, clinical, and scientific applications. These refrigerators also feature spring-loaded, self closing doors with a 90° stay-open feature. Features: - Factory preset at 4°C (adjustable from 1° to 8°C)- 1" insulated access port standard- Positive forced-air circulation maintains temperature uniformity- Set of four 2" casters: two locking and two regular- Environmentally friendly, mercury-free LED interior lighting- Adjustable shelves Specifications: Temperature Range: 1° to 8°CTemperature Control: MicroprocessorDisplay: DigitalTemperature Resolution: 1°CDefrost: AutomaticRefrigerant: CFC- and HCFC-free R134ACabinet: Scratch-resistant paintedChamber: Scratch-resistant paintedNumber of Shelves: 3Insulation: High-density CFC-free urethane foamDimensions (LxWxH) Exterior: 610 x 734 x 864 mmDimensions (DxWxH) Interior: 508 x 508 x 508 mmShipping Weight: 96 kg Items delivered: - Thermo Scientific Revco REL404V High-Performance Laboratory Refrigerator- Instruction Manual - Power Cord The Laboratory Refrigerator is brand new and newer used.

The unit powers on and is in good cosmetic condition. The unit does have tape marks and surface stai (more)ns around it from general use. The rubber seal on the door is quite dirty and stained from general use. The unit was tested with a digital thermometer (not included). When set to 37ºC our thermometer read 29.8ºCWhen set to 65ºC our thermometer read 46.6ºCWhen set to 100ºC our thermometer read 79.3ºC The unit was powered on for most of a morning to reach these temperatures. Interior dimensions:H36cm x W38cm x D32cm

Cecil Type CE 7200 Spectrometer Lab This item was removed from a university lab where it was surplus (more) to requirement. It is in reasonably good cosmetic condition and powers on, however, the display screen is damaged. Therefore, it is listed as Spares/Repair.

VACUUBRAND Oil Mist Filter for RE 2, RZ 2, RE 2.5, RZ 2.5, RE 5, RZ 5, RE 6, and RZ 6 Permissible Fl (more)ow Rate 6 m3/h Catchpot Volume 180 ml Ambient Operating Temperature 10°C to 40°C Features - Very high degree of separation - Optimal control by transparent catchpot - Easy draining of oil - Direct mounting on the oil reservoir outlet - Integrated pressure relief valve for burst protection in case of blocked filter The VACUUBRAND Oil Mist Filter is designed to efficiently eliminate nearly 100% of oil mist from exhaust gases emitted by oil-sealed rotary vane pumps, enhancing the work environment and preventing exposure to harmful aerosols. This filter is compatible with multiple VACUUBRAND pump models including RE 2, RZ 2, RE 2.5, RZ 2.5, RE 5, RZ 5, RE 6, and RZ 6. Featuring an easy-to-mount outlet connection and a DN 10 mm hose nozzle inlet, it supports a maximum volume flow rate of 6 m³/h. The filter also includes a volume catchpot with a capacity of 180 ml. For applications involving solvents, ceramic filter elements are available upon request to extend the filter’s lifespan. INCLUDED: The VACUUBRAND Oil Mist Filter for RE 2, RZ 2, RE 2.5, RZ 2.5, RE 5, RZ 5, RE 6, and RZ 6 includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark TubeRoller with 5 Rollers Speed Fixed 38 RPM Tilt Angle ±5° Motion Simultaneous roll an (more)d tilt Features - Constant speed: Fixed at 38 RPM. - Tilt angle: ±5° for thorough mixing. - Simultaneous roll and tilt motion. - Accommodates 8mm to 200mm diameter vessels. - Dimensions: 18 x 7 x 3.5 in (45 x 18 x 9 cm). - Roller dimensions: 12 x 12.5 in (30.5 x 32 cm). - Optimal for Vacutainers, bottles, and tubes. Your browser does not support the video tag. Benchmark TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers, bottles, test tubes, centrifuge tubes and roller bottles. This TubeRoller operates at a constant 38rpm, chosen as the optimum speed for the broadest range of mixing requirements. As the roller mechanism rotates through each complete revolution, the right side of each roller is gently elevated about 0.5 in (13mm) and returns to the horizontal starting position. This additional, gentle up/down motion provides a “wave” effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built in tilt feature provides a level of homogeneous mixing uniformity that can not be matched by any stationary roller apparatus. From blood collection tubes to roller bottles, Benchmark TubeRollers are the ideal choice for research, clinical laboratories and doctors’ offices.INCLUDED: The Benchmark TubeRoller with 5 Rollers includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty