Labelling equipment

Zebra TLP 2824 Plus - label printer - Black and white - transfer

Zebra TLP 2824 Plus - label printer - Black and white - transfer Print Speed: Up to 102mm/s max spee (more)d: 203 dpi Dimensions: 13.5 x 24.1 x 17.8cm Weight: 1.6kg Without software With power cable only Year of manufacture: 2015

printers, labelling equipment

Thermo Fiberlite Rotor F10S-6x500y 10.000rpm 17.700 g 6x500 ml for Evolution RC

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

€5,500.00 ex VAT

€6,545.00 incl. VAT if applicable

labelling equipment, centrifuge rotors or parts

Mettler Toledo BT-P42 T 2108 Analytical Precision Balance Printer Waagendrucker

Manufacturer: Mettler Toledo Model: BT-P42 T 2108 Analytical Precision Microbalance Printer P/N: 0 (more)0600133 S/N: 1126311716 Inspection due 2019 Description: The BT-P42 is a rugged and simple to operate dot matrix printer for Mettler Toledo balances with an a wireless Bluetooth interface. The printout on normal paper fulfills the requirements of modern quality assurance systems (GLP, GMP, ISO 9001, etc.). These define, among other things, the principles and duties for the user of measuring instruments or inspection, measuring and test equipment. The BT-P42 complies with the principle of traceability of measurements by precisely documenting the origin of data, as well as calibration procedures. It fulfills the obligation to archive measurement results by its thermally stable and lightfast print. On connection to Mettler Toledo balances, the BT-P42 prints all data sent by the balance without restriction, that is not only weight values and calibration procedures, but also the results of all applications, built into the balance. Specifications: - Printing unit: Dot matrix printer 5x9 dots, 24-character line length, Epson IBM character table No. 4- Printing speed: 1 line per second- Ribbon cartridge: Exchangeable, black- Paper roll: Normal paper, 58 x dia. 51 mm, integrated in housing, commercial size- Printer functions: Printing, lightfast and thermally stable (GLP, GMP, ISO 9001), line feed, self-test- Data transmission: Wireless Bluetooth® technology; Max. range of 10 m- Power line voltage, frequency: 230 V, admissible fluctuations –20% +15%, 50/60 Hz- Power consumption: 70 mA- Installation category: II- Pollution degree: 2- Dimensions / Weight (W x D x H): 157 x 210 x 85 mm / net 1.5 kg (incl. paper roll) Items delivered: - Mettler Toledo BT-P42 T 2108 Analytical Precision Microbalance Printer - Instruction Manual as PDF via E-Mail Condition: The printer is in very good cosmetic as well as technical condition, being 100% functional tested. It is ready to be applied.

€300.00 ex VAT

€357.00 incl. VAT if applicable

Agilent Autosampler Vial Holder

FURTHER DETAILS TO FOLLOW

€35.00 ex VAT

€41.65 incl. VAT if applicable

hplc autosamplers, labelling equipment

Agilent HPLC Vial Electronic Crimper 11m 5190-3188

Manufacturer: Agilent Technologies Model: HPLC Vial Electronic Crimper 11m Model number: 5190-3188 (more)Description: Agilent handheld electronic crimper deliver tight, reproducible seals every time.Slim, adjustable steel jaws fit around closely spaced vials, enabling you to crimp vials directly in vial trays. Lightweight to reduce hand strain and easily used in right or left hand.Electronic vial crimper has a long-lasting 6.4 volt lithium ion battery.Manual vial crimpers and decappers are constructed of fiber-reinforced resin with steel reinforcement in the handles.Electronic crimpers and decappers are intended for use in a laboratory environment. Specifications: Temperature limits: 15 °C to 35 °CHumidity limits: not more than 75%Pressure limits: 0.75 to 1 bar Items delivered: - Agilent HPLC Vial Electronic Crimper- Power Supply- Instruction Manual - CD Condition: The crimper is in very good cosmetic condition and 100% functional tested.

€250.00 ex VAT

€297.50 incl. VAT if applicable

hplc accessories, labelling equipment

Sony UP-D895 Video Graphic Thermal Printer Thermodrucker USB GPIB

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€225.00 ex VAT

€267.75 incl. VAT if applicable

Sartorius YDP02-ODV1 Printer for Balance Drucker Waagendrucker

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€125.00 ex VAT

€148.75 incl. VAT if applicable

INDENTEC Hardness Testing Machine 5030SKV Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

INDENTEC Hardness Testing Machine Lab This item was removed from a university where it was surplus t (more)o requirement. It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use. It is listed as Spares/Repair. Also included: Calibration Certificate User Manual Optic Head

£1,000.00 ex VAT

hardness tester, labelling equipment

Ventana 750-200 Discovery Slide Staining System Lab

This Ventana 750-200 Discovery Slide Staining System was removed from a university lab where it was (more)surplus to requirements. The unit powers up but has not been tested further at our facility. It is in reasonably good cosmetic condition with minor marks. Includes: -Instruction manual-Discovery 10X EZ prep solution (expired on 28/12/2017)-7 x reagent bottle modules Item is missing waste module Model- 750-200S/N- 810683

£1,205.00 ex VAT

slide stainers, labelling equipment

Adaptif Phototonics Polarization Synthesizer Model. A3300 Lab

This Adaptif Phototonics Polarization Synthesizer Model. A3300 was removed from a university lab whe (more)re it was surplus to requirements. The unit powers on and is in good cosmetic condition. The power light does not illuminate when switched on but we could hear it running. No PSU was supplied so we used a multi-adapter (not included). The APC input and output ports are in good cosmetic condition. The control button moves freely.

£1,495.00 ex VAT

labelling equipment, optical detectors

13 x Trays Agilent 70ul Wide Bore Conductive Rack 0.2 Case - 10 Racks

13 x Trays Agilent 70ul Wide Bore Conductive Rack 0.2 Case - 10 Racks These items were removed from (more)a university where they were surplus to requirement. All are brand new in their original packaging. Each pack contains 10 Racks.

£1,500.00 ex VAT

labelling equipment, pipettes accessories

BTX Electro Square Porator ECM 830 Lab

This BTX Electro Square Porator ECM 830 was removed from a university lab where it was surplus to re (more)quirements. The item powers on and is in reasonably good cosmetic condition, we are unable to test it further at our facility.

£1,750.00 ex VAT

labelling equipment, electroporation

Gerhardt Fibretherm FT 12 Automated Fibre Analysis System Lab

This Gerhardt Fibretherm FT12 was removed from a university lab where it was surplus to requirements (more). The unit powers up but requires an air compressor and dosing pump to be tested further. It is in good cosmetic condition with minor marks. Model: FT 12S/N: 4072778Dimensions: 34/64/86cmWeight: 40kg230V AC 50-60hz1900W 8,2AIP 20 Additional items included: Insert rack (carousel)Insert rack (carousel) complete with quick clamping handle FIBRETHERM and 12x fixing cones EPDM Boiling vesselBoiling vessel FIBRETHERM, stainless steel, complete mounted with.: Stainless steel pot, Grip, glass ring, seal and centering PTFE Assorted pipes, tubes and fittings.

£1,810.00 ex VAT

labelling equipment, process reactors

Sheen Wet Abrasion Scrub Tester Model - 903 Lab

Sheen Wet Abrasion Scrub Tester Model - 903 Lab This item was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£2,500.00 ex VAT

hardness tester, labelling equipment

Taylor Hobson Talyrond 300 Motorized Radial Arm Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Taylor Hobson Talyrond 300 Motorized Radial Arm This system was removed from a university where it w (more)as surplus to requirement. It is in reasonably good cosmetic condition. When powered up, the item emitted smoke, therefore we did not conduct further testing. Due to the item being damaged, it is listed as Spares/Repairs.

£3,000.00 ex VAT

metrology & inspection, labelling equipment

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System Lab

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System This system was removed from a l (more)aboratory where it was surplus to requirements. Both units power up and are in good cosmetic condition with marks from use. It comes with 8 x Trays (53.5 x 16cm). One tray has been labelled as 'Not moving'

£3,140.00 ex VAT

microscopy equipment other, labelling equipment

Singer Instruments Serial Filler Automatic Plate Pourer Lab

Singer Instruments Serial Filler Automatic Plate Pourer This item was removed from a university wher (more)e it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. Power supply included.

£7,500.00 ex VAT

laboratory modules, labelling equipment

TTP Labtech Mosquito X1 Low Volume Hit Picking Liquid Handling System Lab

TTP Labtech Mosquito X1 Low Volume Hit Picking Liquid Handling System This unit has been professiona (more)lly recertified and is in full working order. It will need to be calibrated with samples upon installation. It is in excellent cosmetic condition with minor marks from use. Included with it are;1 x Dell Laptop (has Mosquito software installed) 1 x Mosquito Control Software Version 3.11.0 Disc (Includes manuals)1 x Mosquito Quick start guide2 x Boneco Humidifiers with power supplies

£12,835.00 ex VAT

automated liquid handling, labelling equipment

RUDOLF ERNST torque meter for screw caps

RUDOLF ERNST torque meter for screw caps range: up to 4 Nm (35 Torque Inlbs) Rotation in 2 direction (more)s torque meter

torque testers, labelling equipment

PITNEY BOWES DI380 inserter

PITNEY BOWES DI380 inserter For parts - non-functional

labelling equipment, packaging equipment other

Biosart 100 Monitor, 100 ml, CN Membrane, white-black, 0.45um, individually packaged, 47pcs

Biosart 100 Monitor, 100 ml, CN Membrane, white-black, 0.45um, individually packaged, 47pcs Sartoriu (more)s Biosart 16401-47-06-ACK Individually Packaged Filtration Monitor, White Cellulose Nitrate Membrane with Black Grid, 100ml Volume, 0.45µm Pore Size (Pack of 47) Quantity available: 2 boxes Please note expiry date expired: 03/2023

WTW OXI 3205 portable oximeter + Cellox 325 probe

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

Spinning top lift BOY 08 510.00 PROLABO 20 x 20 cm

Spinning top lift BOY 08 510.00 PROLABO 20 x 20 cm Lifting support, lifting table for laboratory Tab (more)letop dimensions: 200 x 200 mm With traces of wear

labelling equipment, general laboratory equipment other

Beckman Beckman JA-20.1 Rotor

Refurbished Beckman JA-20.1 Rotor. 6 months warranty. The Beckman JA-20.1 fixed angle rotor is used (more)with Beckman J2 and J6 series and Avanti J series centrifuges. The JA-20.1 can reach speeds up to 20,000 RPM with a max RCF of 51,500 x g. Capacity is 32 x 15ml. Technical data: - Maximum Speed: 20,000 rpm - Maximum RCF at r max (g): Outer Row: 51,500 x g; Inner Row: 43,900 x g - k-Factor: Outer Row: 371; Inner Row: 465 - Nominal rotor capacity: 480 ml - Capacity: 32 x 15 ml tubes

€2,900.00 ex VAT

centrifuge rotors or parts, labelling equipment

Sartorius Tacta 3 Mechanical Pipette 0.1 0.1 - 3 µl 1-Kanal Single Channel

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€120.00 ex VAT

€142.80 incl. VAT if applicable

pipettes calibration, labelling equipment

Sartorius YDP05-PH Printer Meßwertdrucker Drucker for für PH Meters Docu-pH+

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€200.00 ex VAT

€238.00 incl. VAT if applicable

€2,398.52 incl. VAT if applicable

Lab Oven STF-F 120 FALC

A laboratory oven with forced ventilation and an exceptional quality/price ratio! 100% Made in Italy (more) and with all accessories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS: - External structure in steel painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD: - PID thermoregulator with double display and adjustable temperature up to 300°C - 2 shelves - pipe on the back for exhaust fumes with front opening/closing adjustment device - 10 mm hole on the upper side - Digital timer from 0 to 99 hours and 59 minutes + ∞ - Indication of the power used - Auto-tuning (automatic temperature calibration) - Possibility of manual temperature correction (e.g. with certified thermometer) - Safety class DIN 3.1, the highest - Manual adjustment of the over-temperature alarm - IP protection: 42 Laboratory Oven STF-F 52 FALC Forced Ventilation

€2,015.56 ex VAT

Italy

labelling equipment, ovens

Thermo Scientific Thermo 10

Thermo Scientific Thermo 10 Liquid Nitrogen Transfer Vessel. Designed for storing and dispensing sma (more)ll quantities of liquid nitrogen. 10 L capacity. Static evaporation rate 0.18 L/day. Inner neck diameter 5.6 cm. Outer height 54.6 mm. Diameter 26.2 cm. Weight 5.9 kg. Discover the Thermo Scientific Thermo 10 Liquid Nitrogen Transfer Container at Galileo Equipment! Designed to safely and efficiently store and transfer liquid nitrogen, this high-quality, overhauled equipment offers excellent value for money. Its robust and reliable design ensures optimal preservation and handling of liquid nitrogen, guaranteeing long-lasting performance. Ideal for maximizing safety and efficiency in laboratory processes, the Thermo 10 is a smart investment. Visit our website and get yours today at Galileo Equipment!

€950.00 ex VAT

Spain

cryogenics, labelling equipment

Nalgene Oak Ridge 3138-0016 Zentrifugenröhrchen PP 16ml with Lid

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€90.00 ex VAT

€107.10 incl. VAT if applicable