VACUUBRAND PC 510 Select Chemistry Pumping Unit

Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump (more), 120V, 60Hz3D Visualization of the Polyscience Recirculating CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. This Liquid-to-Air Recirculator continuously pumps near-ambient temperature water from a reservoir to an external heat source, through a cooling radiator, and then returns cooled water to the reservoir. By blowing ambient air over the radiator, water flowing inside is cooled and the heat is exhausted into the atmosphere.Features An economical solution for applications where cooling fluid temperature is higher than ambient and temperature control is not required NOTE: No compressor. Uses fan cooling of cooling fluid Quiet liquid-to-air cooling Positive displacement or turbine pump Built-in low liquid level indicator INCLUDED: The Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate Range 0.5 to 3L/min Ma (more)ximum Pressure 4 bar Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual and remote control - Self-priming, can run dry - Maintenance-free - Equipped with brushless DC Motor - Integrated overheating protection The KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual and analog controls. INCLUDED: The KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 12 mm - External Control Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nXDS15iR Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimized pumping performance globally. Unlike the standard nXDS15i, the Edwards nXDS15iR isdesigned for specialist applications such as gas recirculation, rare gaspumping and recovery or other applications where the dilution of the pumped gasis undesirable, or where sealing is integral to minimizing potential gas loss. Click Here to View Product Video INCLUDED: The Edwards nXDS15iR Dry Scroll Pump includes: - Power Cord - Operator’s Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT400T HC - ISO160 160W Turbomolecular Pump Ultimate Vacuum 1x10-8 mbar Inlet Connection D (more)NISO160-K Pumping Speed Nominal 2399.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT300T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT300T HC - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connecti (more)on DN100CF Pumping Speed Nominal 1799.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT300T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - (more) High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Freestanding design driven by a flexible coupling with either a single-phase or three-phase (four pole) motor - Achieves excellent vacuum levels, including 1 x 10⁻³ mbar without gas purge and 1.5 x 10⁻¹ mbar with gas purge - Equipped with NW25 inlet connection and a removable 15 mm nozzle outlet, allowing flexible integration into existing systems - Operates efficiently within a temperature range of 13-40°C, accommodating different environmental conditions - Facilitates easy oil changes with a maximum oil capacity of 1.05 liters and a minimum capacity of 0.75 liters - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards E2M18 Vacuum Pump The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.Click Here to View Product Video INCLUDED: The Edwards E2M18 Vacuum Pump includes: - 1 Liter of Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PVL 15 C model - Tank volume min. 11 L - Tank volume max. 15 L - Tank opening 230 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 100°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

Ohaus Defender 3000 i-D33 Bench Scale Ideal for general purpose weighing, simple counting and checkw (more)eighing applications for manufacturing, packaging, warehousing, inventory, shipping and receiving operations. The Defender 3000 series features a simple yet robust design and an IP65 load cell. The multi-colored backlit LCD display, AC power or battery operation and flexible mounting options. In weight control mode, the display changes color (yellow / green / red) to alert the user when it is within the target weight range. Applications Weighing, weight control, counting, totalization Display 7-segment LCD with multicolor backlight Operation AC power cord (supplied), 6C batteries (LR14) (not included) or rechargeable battery (not included) Communication RS232 interface included and optionally USB Device or Ethernet for printing or data connectivity. Structure ABS plastic gauge, 304 stainless steel platform, powder coated tubular steel frame, IP65 aluminum load cell, adjustable non-slip rubber feet Construction features Overload protection up to 150% of range

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Patented lighting system guarantees homogeneous light distribution Variably positionable light casse (more)tte with 5 fluorescent tubes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW