VACUUBRAND ME 8C NT Chemistry Diaphragm Pump

Grundfos CRI 1 Vertical Pump Type - A-CA-I-V-HQQV Model - A96532497P20639 This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and draws suction but has not been tested further. It is in reasonably good cosmetic condition, with some marks from use.

VACUUBRAND ME 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Spee (more)d 1.4 cfm Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Outstanding chemical resistance. - Long diaphragm life, maintenance-free drive system. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. One-stage chemistry diaphragm vacuum pumps are an excellent choice for applications with corrosive gases and vapors which do not require very deep vacuum levels. Typical applications are vacuum ovens, filtrations as well as concentration of solvents with low boiling points. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. The well proven robust PTFE sandwich diaphragm provides outstanding reliability and operating life. INCLUDED: The VACUUBRAND ME 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MARSHALL Select MS-VP200 Chemical Protected Diaphragm Vacuum Pump, 200 mbar Ultimate Vacuum 200 mbar (more) (150 Torr) Pumping Speed 30 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a rapid pumping speed of 30 L/Min for effective operation - Weighs 7.6 kg, making it easy to transport and position The MARSHALL Select MS-VP100 Vacuum Pump is designed for efficient and reliable operation in a variety of laboratory and industrial applications. Featuring an oil-free design with a built-in filter, this vacuum pump ensures clean and uncontaminated air exhaust, making it ideal for environments where purity is crucial. The automatic cooling exhaust system enables continuous 24-hour operation, enhancing productivity and efficiency in demanding settings. The pump's adjustable pressure design allows users to fine-tune the vacuum and gas velocity to meet specific requirements, except for the GM-0.20 model. With a TEFLON surface treatment, the MS-VP100 is highly resistant to gas corrosion, ensuring long-term durability and reliable performance. With an ultimate vacuum of 200 mbar (150 Torr) and a pumping speed of 30 L/Min, the MARSHALL Select MS-VP100 delivers powerful and efficient vacuum performance. It features 6 mm inlet and outlet flanges and operates within a working temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, providing a conducive working environment. Its compact design, with dimensions of 21 x 16 x 23.5 cm and a weight of 7.6 kg, makes it easy to integrate into various setups. The pump is equipped with nitrile butadiene rubber valves and requires an electrical supply of AC110/220V, 50/60Hz. The vibrant orange look of the MS-VP100 not only adds a distinctive aesthetic but also signifies its anticorrosive capabilities, making it a reliable choice for diverse vacuum applications.INCLUDED: The MARSHALL Select MS-VP200 Chemical Protected Diaphragm Vacuum Pump, 200 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MORE DETAILS TO FOLLOW

Chemical-resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate, separator on (more) the suction side and high-performance condenser on the pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This HP Agilent Keysight 5334B Universal Frequency Counter is being sold on behalf of a client. It i (more)s surplus to requirements. It is in working order and in good cosmetic condition with minor marks from use. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Edwards nXDS10iR Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Unlike the standard nXDS10i, the Edwards nXDS10iR isdesigned for specialist applications such as gas recirculation, rare gaspumping and recovery or other applications where the dilution of the pumped gasis undesirable, or where sealing is integral to minimizing potential gas loss. Click Here to View Product Video INCLUDED: The Edwards nXDS10iR Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS10iR Dry Scroll Pump Technical Specifications Nominal rotational speed1800 rpmDisplacement12.7 m3h-1 / 7.5 ft3min-1Peak pumping speed11.4 m3h-1 / 6.7 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed7.5Maximum continuous inlet pressure200 mbarMotor power 1-ph280 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.8 kg / 57 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iREdwards nXDS10iREdwards nXDS15iREdwards nXDS20iRNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Download the datasheet, choose the model with the desired range/resolution and contact us for our be (more)st quote. Defender 6000 advanced IP68/IP69k washable bench scale Versatile, precise and extremely resistant. Suitable for extreme humid environments, the new Defender® 6000 bench scale has been designed to offer an IP69K degree of protection and meet the hygienic demands of the chemical and food industries. For years, operators in the food, chemical and pharmaceutical industries have chosen Defender bench scales from OHAUS for their exceptional reliability, accuracy and versatility. - Resistant to intensive washdowns in processing and packaging environments: IP68/IP69K, - NSF certified and supports HACCP systems with a 316 stainless steel base: Corrosion protection in food and chemical processing and packaging. - Large display and different application modes - Connectivity: GLP/GMP data output with real-time clock Control panel DT61PW, for Defender 6000 Hybrid Easy to use thanks to its five buttons and its large and bright LCD screen. They offer an optional infrared communication kit to connect without opening the housing. The indicator is capable of storing up to 1,000 weighing results which can be transferred to a PC or system for traceability. PW models can run on standard D-cell batteries for up to 1,600 hours. D61XWE control panel, for Defender 6000 in stainless steel. Bar matrix display, cut resistant keyboard with dedicated keys for quick product changes and touchless sensor. They offer several connectivity options, including standard RS232 and integrated USB host. Optional: RS232/RS485/USB, analog output, Wi-Fi/Bluetooth, Ethernet and discrete I/O with relay. XWE models run on standard mains power, and optional external USB power bank support is available (up to 55 hours with 20,000mAh power bank). Models without column, Defender 6000 Front Mount Models without column, only with the DT61PW control panel, are also available for the Defender 6000 Hybrid. APPLICATIONS Weighing: Determine the weight of items in the selected unit of measure. Parts Counting: Count items of uniform weight. Advanced auto-optimization software recalculates the average piece weight as the overall weight increases. Checkweighing/ Checkcounting: Compare the weight of an item against target limits. Compare the count of a package against target limits. Bar matrix or 3-color check light display give clear and bright indication of weight. Percent Weighing: Display the weight of an item as a percentage of a pre-established reference weight. Dynamic Weighing and Display Hold: Take an average of weights for an item over a period of time to account for vibration or other interference. The Display Hold feature manually or automatically holds the last stable weight of an item on the display. Available only in the i-D61XWE models: Filling: Fill a container to a target weight. 3-color bar matrix displays filling status. Connect with Discrete I/O option kit for an auto-filling system. Library and User Management: Up to 300 library items (stores part number, tare weights, APWs, under/over limits, set points or reference weight) can be shared within different weighing modes. Up to 100 user IDs can be stored for secure user access and traceability Resistance and practicality The Defender 6000 scale features a 316 stainless steel platform and frame, and an advanced wet-weather indicator with IP68/IP69K rating and hermetically sealed load cell, as well as a cut-resistant front panel. Plus, NSF Certified and USDA-AMS Approved; supports HACCP systems, for environments related to food safety. The scale can withstand any mishap, from food splashes to chemical splashes, and is sturdy enough to be washed down with a high pressure washer. Resistant to intensive washing typical of processing and packaging environments. Plus: 150% overload protection, password menu protection, menu and key lock, stability indicator, overload/underload indicators, low battery level indicator (i-DT61PW models), auto power off and automatic tare. A dedicated target key allows you to quickly configure over/under weight of packs, speed up line changes and simplify and customize templates for data printing. In the video: How to use the 'checkweighing' mode. In the video: How to use the 'fill' mode.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW