Siemens IEC-60034-1 Pump with Heat Exchanger

Labor port N 96 KNF Compact and portable diaphragm vacuum pump, resistant to chemicals and corrosive (more)s, oil-free. The pump capacity is manually adjustable with a simple knob. Laboport is equipped with gas ballast, PTFE/TFM heads, PTFE lined diaphragms and FFPM valves. It is suitable for a wide range of laboratory applications, including extremely aggressive/corrosive gases and vapours. Technical features - Flow rate (max.) 7 l / min - Final vacuum (max.) 130 mbar (abs.) - Pressure (max.) 2.5 bar (rel.) - Permissible fluid temperature 5-40 °C - Valve material: FKM - Diaphragm material: PTFE coated - Pump head material: PPS Applications - Filtration - Fluid suction - Solid phase extraction Qualitative characteristics - 100% oil-free transfer: transfer, evacuation and compression of gases in a clean and safe way - Extremely small footprint - The PTFE coated diaphragm is ideal for aggressive agents / gases and corrosive vapors - Integrated control of the rotation speed - Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION Presentations of the Laboport line directly from the specialists who created it. English subtitles. Presentation of the new Laborports and SMART KNF control.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Scilog Tandem 1081 Peristaltic Pump. The unit is in full working condition an (more)d is ready for immidate realese.

This Agilent Technologies HPLC 1200 Series G1311A Quat Pump Quaternary was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility.

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump HeadFeatures - Utilizes (more) positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump Head includes: - Selected High Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT400D - CF160 160W Turbomolecular Pump Ultimate Vacuum <1x10-10 mbar Inlet Connection  (more)DN160CF Pumping Speed Nominal 24,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT400D - CF160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

The system includes: pt100 probe (code A00000268), magnetic stir bar Ø8x40 mm (code A00000356). AREC (more) 7 CONNECT MAGNETIC STIRRER AREC 7 Connect features state-of-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. AREC 7 Connect can be connected to the external Pt100 probe for precise thermoregulation of the fluid, being ideal for temperature-sensitive applications in Chemistry, Biotechnology and Pharmaceuticals. The probe guarantees stable and precise thermoregulation up to 300°C, with an accuracy of ± 0.5°C. Powerful stirring for all your lab applications Thanks to the powerful magnetic coupling, you will have the possibility to stir up to 20 liters (H2O), from 30 up to 1700 rpm (aqueous solutions), ideal characteristics for any type of application, chemical, pharmaceutical and microbiological. In addition, the SpeedServo ™ technology, designed by VELP, will keep the speed constant as the viscosity changes. Absolute safety and ease of use for laboratory operators The AREC 7 Connect hotplate stirrer guarantees a higher level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. Save time with the new control panel Thanks to the double digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature and the stirring speed. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1700 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. Programmable operation for excellent laboratory efficiency AREC 7 Connect is equipped with some exclusive and extremely advanced features that optimize unattended operation, easily usable, thanks to the intuitive display: - Integrated timer to suit your lab workflow - 1 min to 99 h 59 min (1 min steps) - Autorverse of the stirring direction which guarantees advanced mixing capabilities - from 5 s to 99 min and 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps) - Acoustic signals for timers and alarms - Safety lock function to avoid possible alterations of the working conditions 1 - Ceramic heating plate 2 - Main switch 3 - Speed control knob 4 - Temperature control knob 5 - Display A - Probe led B - Wi-Fi led C - Temperature setpoint led D - Timer led E - Autoreverse led G - Menu and lock button F - Intermittent mode led Note: it’s important to choose the most suitable magnetic stirring bar related to the type and the quantity of the liquid to be stirred as well as to the type of the beaker. Size and shape of the magnetic stir bar determines the stirring efficiency at any given speed. After purchase you will receive: ➢ AREC Connect, Heating Magnetic Stirrer ➢ Instruction manual ➢ Magnetic stir bar ➢ Power supply cable VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREC 7 Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC 7 Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC 7 will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP service centres.VELP ERMES: FROM USER WORK MANAGEMENT TO PROCESS DATA-RICH AREC 7 Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC 7 Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC 7 will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP assistance centres.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Bio-Rad GelAir Dryer The GelAir drying system is perfect for drying polyacrylamide and agarose gels. (more) With timer control On/off mode works Function modes : Fan only; fan and heat; off Dryer capacity : 4 shelves Without shelve , Without GelAir Drying Frames Dimensions (WxDxH) : 27x43x30 cm Weight : 8 kg

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault. Therefore, it is listed as Spares/Repair.

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.