Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump, 120V, 60Hz

The Pfeiffer Vacuum TPH062 has a wear free permanent magnetic bearing at the high vacuum side and an (more) oil lubricated ceramic bearing at the backing side. Applications: Freeze drying – packaging industry Degassing, casting, dry vacuum smelting (super-pure metals) Incandescent lamp manufacturing Electronic tubes Thin film deposition Space simulation Cryogenic research Electron microscopy Nuclear physics, Plasma physics, High energy physics Particle accelerators – Storage rings Inlet Flange: DN 63 ISO-KF Outlet Flange: DN 16 ISO-KF Final pressure: < 1 x 10-11 mbar Flow Rate (N2): 56 l/s Weight: 3.5 kg

Gilson HPLC System 119 UV/VIS Detector - 305 Pump - 506C - 811C - 805 This was removed from a univer (more)sity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonable cosmetic condition with minor marks. Included are; Gilson 119 UV/VIS DetectorSN - 109M6D135Powers on - UV Lamp Hours - 3417/VIS - 880 Hours Gilson 305 Pump SN - 168234Powers on Gilson 506C System Interface ModuleSN - 369H7PA315Powers on Gilson 811C Dynamic MixerSN - 369E6T062 Gilson 805 Manometric ModuleSN - 169434Powers on Gilson UniPoint System Software Users GuideGilson UniPoint Documentation Version 5.1Box full of parts/consumables - Too many to catalogue

VACUUBRAND ME 16 NT Diaphragm Pump Ultimate Vacuum 70 mbar Max. pumping speed at 60 Hz 9.6 cfm Num (more)ber of Heads/Stages 8/1 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. The one-stage design provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All parts in contact with pumped media are made of aluminum and selected plastics allowing a wide range of applications for non-corrosive gases. The highly flexible, fabric-reinforced double diaphragms made of FKM are ideal for extended operating life. These pumps are particularly powerful and offer large volume flow. The eight-cylinder pump ME 16 NT features exceptionally high pumping speed, low vibration and a very compact design with smooth and easy-to-clean surfaces. Large one-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping of large amounts of gases. Typical applications are vacuum ovens and in general evacuation and pumping of non-corrosive gases. They are also excellent for very fast evacuations down to modest vacuum levels.INCLUDED: The VACUUBRAND ME 16 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump HeadFeatures - Utilizes (more) positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump Head includes: - Selected High Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nXDS15iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS15iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS15iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange&lt; 4.5 mms-1 (rms)Leak tightness (static)&lt; 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370°C. Fontal panel The control panel is extremely intuitive. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500rpm). Maximum Protection, IP 42 ARE magnetic stirrers guarantee a high level of safety and protection for the user, thanks also to the raised control panel and the special channel for conveying liquids (in case of spills). The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design ARE offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use. AluBlocks™, Greater Versatility AluBlocks™ allow you to perform different heating and stirring experiments with unprecedented flexibility, acting on different types and sizes of tubes. Being modular, they are ideal for creating a workstation that is always customized, capable of supporting tubes of different formats. Made entirely of aluminum, they can be easily placed on the round head heating stirrers for excellent heat transmission and temperature homogeneity. A huge leap forward in productivity, while also saving time, money and counter space. Technical features: Structure: aluminum alloy with epoxy paint Heating plate: aluminum alloy with special protection Diameter of the heating plate: 135 mm Degree of protection CEI EN 60529: IP 42 Power: 630W Weight: 2.6 Kg Dimensions (LxHxP): 165x115x280 mm PERFORMANCE Electronic speed regulation: up to 1500 rpm Temperature regulation: from room temperature to 370°C Stirring capacity (H2O): up to 15 liters Stirring system: high force driving magnet suitable also for continuous work Feedback: constant speed

Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C,  (more)5200W, 230V 60HzDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5200W, 230V 60Hz SpecificationsKey SpecificationsDescription1.5 HP Chiller, Positive Displacement; Air-CooledDisplayLEDConnectivityOptional: RS232, RS485Working Temperature Range °C5° to 35°Temperature Stability °C±0.5°Temperature Calibration Capability1-pointPump TypePositive Displacement 60 Hz OnlyPart Number6860P46A270DMaximum Pressure (psi)100.0Maximum Pressure (bar)6.90Maximum Pressure Flow Rate (gpm)3.50Maximum Pressure Flow Rate (l/min)13.2Cooling Capacity @ +10°C (W)4420Cooling Capacity @ +20°C (W)5200Cooling Capacity @ +30°C (W)5980Heater Wattage1000Electrical Requirements (VAC/Hz/Ph/A)230/60/1/21.1Regulatory ApprovalsTUVDownloadsTechnical Specification Download Operator's Manual Download

Dräger X-am 5100 Gas Analyser Lab This item was removed from a university where it was surplus to re (more)quirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

Scientific Industries Orbital-Genie Shaker w/ Adhering Mat Benchtop Orbital Shaker equipped with an  (more)adhering mat providing a flat platform with adhering rubber mat perfect for use with open containers. Patented material is naturally adhering. Rinse clean to renew adhering properties.Scientific Industries Orbital-Genie Shaker w/ Adhering Mat Specifications Speed (RPM) 10 – 300 RPM including stir reverse Timer 1 min - 99 hours w/Alarm or Continuous Orbit 35mm Selectable Ramp Rates 10 - 100 rpm/sec Product Weight 21 Kg (46 lbs.) Dimensions (base) 460 x 460mm (18 x 18in) Overall (D x W x H) 590 x 500mm (23 x 20in) Warranty 24 months Markings CE

IKA RV 3 V Rotary Evaporator Features - Locking mechanism: red indicator shows unlocked position of  (more)vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The new RV 3 Rotary Evaporator is the ideal entry-levelmodel of the IKA rotary evaporator portfolio. It finds a multitude of uses inthe chemical, pharmaceutical, and biotechnology industries, in research anddevelopment, in manufacturing and quality assurance, in laboratories, and inplant construction. Thanks to specially designed glass guides, the condensermakes extremely efficient use of the 1500 cm² cooling surface. INCLUDED The IKA RV 3 V Rotary Evaporator includes: - RV 3 ECO - HB eco S099 Heating Bath - RV 10.900 Glassware vertical - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 3 V Rotary Evaporator SpecificationsType of cooling verticalCooling surface 1500 cm2Motor principle DCSpeed range20 - 300 rpmSpeed tolerance set rotation speed &lt; 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke150 mmHeating temperature rangeroom temp. - 99 °CDimensions (W x H x D)440 x 530 x 330 mmWeight28.3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationRV 10 Auto Pro V FlexRV 10 Auto VRV 10 Digital VRV 3 VRV 8 VType of CoolingVertical CondenserVertical CondenserVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.34 kg34.96 kg32.36 kg28.3 kg25.76 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }