Metrohm 683 Pump Unit

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Varian Turbo V60 Turbomolecular Pump 969-9002 was removed from a university lab where it was su (more)rplus to requirements. The unit was inspected by a qualified service engineer at ambient pressure. It is in good working order. The controller is not included and was used for testing purposes only. The listing is just for the pump. No controller is included. It is in very good cosmetic condition with only minor marks from use.

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual P-Pump model number- 3200016_4P-Pump serial number- 1600682 Chamber serial number- 1600843 Sensor serial number- 160880

VACUUBRAND PC 511 Select Chemistry Pumping Unit Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible results - Easy-to-use application editor allows own process sequences - Powerful vacuum pump with excellent chemical and condensate compatibility - PC 511 select allows simultaneous operation of two independent vacuum applications The PC 511 select is an economical, compact solution for simultaneously running two independent vacuum applications with a single pump. Our popular MZ 2C NT two stage chemistry diaphragm pump is the heart of these pumping units, frequently used for medium-sized vacuum applications involving common solvents. With an intuitive, application-based interface, the VACUU·SELECT controller offers predefined vacuum processes for all common laboratory applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the electronically controlled port detects the boiling pressure and switches to two point control to hold pressure steady when a boiling point is detected. A second, manually controlled vacuum port permits simultaneous operation of a second vacuum application on the same pump. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 511 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN811KVP IP20-T Diaphragm Pump< Ultimate Vacuum 100 mbar Maximum Flow Rate 13L/min (.78 m3/h (more)) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Compact, quiet and reliable - Small footprint - Can handle wet vapors without damage - Maintenance-free The KNFUN811KVP IP20-T Diaphragm Pump has an extremely small footprint with big use.It features a PTFE-coated diaphragm, making it ideal for aggressive orcorrosive gasses & vapors. With a flow rate of 13L/min, and a ultimatevacuum or 75 torr, the KNF UN811KVP IP20-T Diaphragm Pump is a compact,powerful, fast & reliable vacuum, made for clean results. This pump is 115V. INCLUDED: The KNF UN811KVP IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 1 Year Manufacturer's Warranty

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This Dionex AS50 was removed from a university lab where it was surplus to requirements. The unit po (more)wers up but without the autosampler, we are unable to test it further. It is in good cosmetic condition with minor marks.

Thermo Scientific Multidrop 384 Microplate Dispenser Labsystems 832 Lab This was removed from a univ (more)ersity lab where it was surplus to requirements. The unit powers up with no faults, unable to test it further at our facility. It is in good cosmetic condition with minor marks.

Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V offers precise temperature control for a wide range of laboratory applications. With a temperature range from 0°C to +70°C and a setting accuracy of 0.1°C, this incubator ensures reliable and consistent results. Its energy-saving Peltier heating/cooling system is designed for efficiency, while the advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display makes operation intuitive. The SetpointWAIT function ensures that processes begin only once the set temperature is reached, providing additional accuracy and peace of mind. This 32-liter incubator features a corrosion-resistant stainless steel interior and a textured stainless steel exterior, ensuring durability and long-lasting performance. The unit is equipped with an adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety, while the autodiagnostic system offers fault analysis. With a maximum chamber load of 132 lbs and support for up to three shelves, the IPP30 is designed to handle a variety of samples, making it an ideal solution for laboratories that require precise, reliable, and energy-efficient incubation. INCLUDED: The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Eppendorf FA-45-48-11 Fixed Angle Rotor, Cat. #: 5427754008 The Eppendorf FA-45-48-11 Fixed Angle Ro (more)tor, Cat. #: 5427754008, is a centrifuge rotor designed for use with the Eppendorf 5430/R Series centrifuges. This rotor has a maximum speed of 12,700 RPM and a maximum relative centrifugal force (RCF) of 18,210 x g. It can accommodate a maximum capacity of up to 48 × 1.5/2.0 mL tubes, making it suitable for a wide variety of applications. INCLUDED: The Eppendorf FA-45-48-11 Fixed Angle Rotor, Cat. #: 5427754008 includes: - Eppendorf FA-45-48-11 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-48-11 Fixed Angle Rotor, Cat. #: 5427754008 SpecificationsMaximum Speed12,700 RPMMaximum RCF18,210 x gMaximum Capacity48 × 1.5/2.0 mL tubesMax. Radius10.1 cmMin. Radius8.9 cmCentrifuge CompatibilityEppendorf 5430/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }