KNF UN840.3FT.40P IP44-T Diaphragm Pump

This listing is for a Scilog Tandem 1081 Peristaltic Pump. The unit is in full working condition an (more)d is ready for immidate realese.

Gilson Minipuls 3 Pump Head R2 For Peristalic Pump Part#: F117800 This was removed from a universit (more)y lab where it was surplus to requirements. Item is in good used condition with minor surface damage. It comes with the original packaging.

BOC Edwards Scroll Vacuum Pump XDS5 A724-01-903 This system was removed from a university lab where  (more)it was surplus to requirements. The unit is in very good, clean condition and is in working order. Specifications:- Model: XDS5 A724-01-903 - Serial No.: 056314619

Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VACFeatures -  (more)Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3T1-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Heidolph Multi-Channel Pump Head C8 Features: - Accepts 8 cassettes medium or 4 cassettes large - 4- (more)roller design - Increase your throughput by running up to 12 cassettes small on one single pump drive and pump head system - Separate metering into multiple vessels with different feed rates in a single operation by using different tubing dimensions to adjust flow rate - Save time: tubing change is done in just seconds - Change your cassettes easily, even during operation – there are no restrictions - Cassette adjustments and changes are simple, just click in place - No additional purchase of a pump drive needed: upgrade your single-channel pump drive with just one adaptor for multi-channel use and pick the head/cassette configuration that matches your application needs These pump drives can be configured for multi-channel use: - Hei-FLOW Core 120 - Hei-FLOW Expert 120 - Hei-FLOW Ultimate 120 INCLUDED: The Heidolph Multi-Channel Pump Head C8 includes: - 3 Year Manufacturer's Warranty

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This was removed from a university lab where it was surplus plus to requirements. All units power up (more) but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; -Dolomite Mitos P-Pump-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor P-Pump model number- 3200176_5P-Pump serial number- 4901379 Sensor serial number- 1600878

This Varian VK 8000 Dissolution Sampling Station was removed from a university lab where it was surp (more)lus to requirements. This item is in good cosmetic condition and powered up, we are unable to test it further at our facility. The VK 7010 has the capacity to hold 8 vessels of 1 litre capacity and 8 stirring drive shafts but this unit is Missing its stirrers and vessels No paddles or spindles are fitted to the chucks on the drive shafts

Ohaus HOHTDG HT Lysing Homogenizer The Ohaus HOHTDG HT Lysing Homogenizer is a homogenizer specifica (more)lly designed for high throughput sample processing in a microplate, deep well plate, or sample tube format. Animal tissue, seeds, tubers, leaf punches, soil and sediment samples, insects, and microbial cultures can all be effectively homogenized in a 96-well or microplate, deep well plate, or sample tube format. The high speed linear motion of the homogenizer allows for rapid sample processing; in most cases two (2) minutes or less. Samples are placed in a tube, vial or well with a grinding media and extraction buffer (seeds can be ground dry), sealed with a cap or press-on mat, placed in the HOHTDG HT Lysing Homogenizer, and processed. Homogenized samples can be subsequently handled manually or in automated systems making use of the standard plate format. The HOHTDG HT Lysing Homogenizer is suitable for the isolation of protein, DNA, RNA, viruses, and any other biological components released during homogenization. The unit is also useful for pulverizing dry samples for chemical analysis and solubility studies.Click Here to View Product Video INCLUDED: The Ohaus HOHTDG HT Lysing Homogenizer includes: - Sample Tube Kit with 14 Samples - Tube Rack - Allen Wrench - Wrench - Power Cord - Operator's Guide - 2 Year Manufacturer Warranty

Ohaus 30314836 30 x 1.5/2.0ml Fixed Angle Rotor The Ohaus Ohaus 30314836 30 x 1.5/2.0ml Fixed Angle  (more)Rotor accommodates a capacity of up to 30 x 1.5 / 2.0 ml. This rotor is designed for use with Ohaus FC5916, FC5916R, FC5718, FC5718R, FC5830R, and FC5720R series centrifuges. The Ohaus 30314836 Fixed Angle Rotor reaches a maximum speed of 20,000 RPM and a maximum Relative Centrifugal Force of 42,032 x g. INCLUDED: The Ohaus 30314836 30 x 1.5/2.0ml Fixed Angle Rotor includes: - Ohaus 30314836 30 x 1.5/2.0ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson PIPETMAN L Multichannel P12x300L with V-Rings, 20-300 uL Pipette Designed for performance and (more) comfort, PIPETMAN® L comes in acomprehensive range of models adapted to your needs in the lab. Comfortable,precise, accurate, and reliable, use PIPETMAN L pipettes confidently in yourapplications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volumesingle channel models covering a volume range from 0.2 μL to 10 mL - Variable volumemultichannel models covering a volume range from 0.5 μL to 1200 μL, includingfour models equipped with V-rings (VR) at the bottom of the tip holder for aproper fit with most tip brands, covering a volume range from 20 µL to 300 µL - Fixed volumesingle channel models covering a volume range from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines an ergonomicdesign with minimized pipetting forces, giving you the ability to pipettelonger without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you.Secure PipettingReduce pipetting errors and avoid accidental volume changesduring pipetting cycles with a true volume-locking mechanism for improvedaccuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals.Choose your ModelChoose your channel number and volume range, up to 1200 μLfor various protocols. Four PIPETMAN L multichannel models equipped withV-rings (VR models) offer an improved compatibility with tips from otherbrands.GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN L Multichannel P12x300L with V-Rings, 20-300 uL Pipette includes: - Operator's Guide - 3 Year Manufacturer's Warranty