KNF UN840.1.2FTP IP44 Diaphragm Pump

Pfeiffer Turbo-V 301 Navigator  Model#: 9698918S003 Turbomolecular Pump Lab This was removed fr (more)om a university lab where it was surplus to requirements. The unit has not been tested but is in good cosmetic condition with minor marks.

Genevac Boc Edwards Scroll Pump Model XDS5 This item was removed from a university laboratory where  (more)it was surplus to requirements. It powers on and is in good cosmetic condition. Please note: The pump requires connection to a Genevac evaporator to initiate operation. Model: XDS5

Varian HS 602 Two Stage Rotary Vane Vacuum Pump This item was removed from a university lab where it (more) was surplus to requirements. It is in very good cosmetic condition and powers on, we are unable to conduct further at our facility.

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a univer (more)sity lab where it was surplus to requirements. PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up.

KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump Ultimate Vacuum 99 mbar Maximum Flow Rate 110L/min (6.6 m (more) 3/h) Protection Class IP54 Features - Clean, 100% oil-free operation - Chemically-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Can handle wet and highly corrosive gases or vapors - Gastight, leakage rate ratio 6 x 10-3 mbar - Maintenance-free The chemically-resistant series N860.3FTP diaphragm pump is KNF's largest laboratory twin-head unit. There is a wide range of applications for this pump in the lab. It is used especially whenever clean vacuum is required. Examples include vacuum-drying of vacuum oven chambers for drying or heat-treating substances and components or larger rotary evaporators, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used with most all solvents. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. INCLUDED: The KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Rigaku MicroMax-007HF Rotating Anode X-Ray Generator, AFC-11R System Lab This system was removed fro (more)m a university where it was surplus to requirement. All units are in excellent cosmetic condition. This Rigaku X-ray generator is reportedly in working condition according to the previous owner. However, some parts, such as the detector, were removed for spares to keep another system running. No testing was conducted, as the main unit requires a transformed three-phase 400-volt to a 200-volt three-phase supply. Therefore, we cannot confirm its working condition and therefore it is listed as Spares/Repair. This system comprises the following: Rigaku MicroMax-007HFModel RA-MICRO7HFM_RACSerial No. ID211302 The main control system is mounted on a cabinet 100 cm x 60 cm x 90 cm high with a metric 2.5 cm hole spacing isolation tabletop.The operating unit mounted on the table is 40 cm x 30 cm x 55 cm high Rigaku Model AFC-11R detector base and positioning unitSerial No. ID02493 Technifab Products cryogenic sample preparation unit52 cm platform with 9 cm central hole with insulated bung26 cm diameter x 22 cm deep stainless vessel Accessories: 1 x Rigaku Osmic Varimax Optical Fixture Serial No. 25001 x Rigaku Crystallography X-ray XRF Model CU 4364F5012 x Rigaku X-Ray Diffractometer Instruction ManualsSeveral lengths of colour coded 5mm tubing1 x Hampton Research HR4-767 XYZ heated goniometer head1 x Hampton Research HR4-643 XYZ short standard goniometer head1 x PEX4S553B PCB/card to interface with 4 coms sockets

This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but was not tested further at our facility. It is in good cosmetic condition, with some marks from use. Some of the components have been removed, it is sold for spares/repairs

This listing is for 1 of 2 IKA MS 3 Basic Orbital Shaker. The unit is in full working condition and (more) is ready for immediate release. The IKA MS 3 Basic Orbital Shaker is an efficient and versatile laboratory device designed for a variety of shaking tasks involving small vessels and microtiter plates. Its compact design and robust features make it suitable for both routine laboratory applications and more specialized experiments. Key Features: Orbital Movement: The shaker operates with an orbital motion, characterized by a shaker diameter of 4.5 mm. This design allows for effective mixing of samples within a range of vessel types. Two Operating Modes: Mode A (Safe Mode): In this mode, the shaker detects the type of attachment being used and restricts the speed to a maximum of 1,300 rpm for non-standard attachments, ensuring safety and preventing damage to both samples and the device. Mode B: This mode does not feature attachment detection and allows for higher speeds up to 3,000 rpm, depending on the attachment and application requirements. Touch Operation: The standard attachment enables up to 3,000 rpm in touch mode, providing immediate mixing responses when needed. Stable Shaking: The shaker maintains stable operation across all speed settings, ensuring uniform mixing of solutions and samples without fluctuations that could impact experimental results. Durable Construction: Built with a robust zinc die-cast casing, the MS 3 B promises longevity and reliability in various laboratory environments. Permissible Shaking Weight: The machine can accommodate a maximum shaking weight (including attachments) of 0.5 kg, making it versatile for different laboratory setups. Key Specifications: Type of Movement: Orbital Shaker Diameter: 4.5 mm Permissible Shaking Weight (including attachments): 0.5 kg Operating Modes: Mode A: Safe mode with attachment detection Mode B: Without attachment detection Speed Range: 0 - 3,000 rpm (Limited to 1,300 rpm in Mode A with non-standard attachments)

Benchmark H5100-CMB 15 x 0.5ml and 20 x 1.5ml Combination Block for MultiTherm Touch The Benchmark H (more)5100-CMB 15 x 0.5ml and 20 x 1.5ml Combination Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. ThH5100-CMB is compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-CMB 15 x 0.5ml and 20 x 1.5ml Combination Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Four-sensor powder-coated platforms are a type of industrial scales that have four load cells (strai (more)n gauges) located in each corner of the platform, ensuring accurate measurements regardless of where the load is located on the platform. Application Four-sensor powder-coated platforms are ideal for industrial applications where precise and reliable measurements of heavy loads are needed. They can be used in warehouses, logistics centres, manufacturing plants, as well as in the food, chemical and pharmaceutical industries. Powder coating provides them with extra protection against harsh working conditions, which increases their service life and reliability. Use the potential Our platforms can work with one of as many as eight weighing terminals: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10, PUE 5.