KNF UN816.1.2KT.45P IP20-T Diaphragm Pump

To connect pump drive to multi-channel pump head Heidolph Outlet instrument*. 12 months warranty. *H (more)eidolph Outlet instrument can be overstocked item, returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects.

VACUUBRAND MV 10 NT Diaphragm Pump Ultimate Vacuum 0.5 mbar Max. pumping speed at 60 Hz 6.1 cfm Nu (more)mber of Heads/Stages 8/4 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Four-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases when the need is to reach fractional millibar ultimate vacuums. All parts in contact with pumped vapors or gases are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of non-corrosive applications. These pumps provide the advantageous combination of high pumping speed with an extraordinary good ultimate vacuum down to 0.5 mbar. The highly flexible, fabric-reinforced double diaphragms made of FKM offer extended operating life. Eight-cylinder NT pumps features quiet operation, smooth and easy to clean surfaces. Four-stage diaphragm pumps are an excellent choice for continuous, contamination-free evacuation and pumping of non-aggressive gases under the very high vacuum demands of applications in physics and analytics. They generate a clean vacuum, as they are designed without any contact seals, hence no abrasion or dust is produced that might creep back into the application. Due to the outstanding ultimate vacuum, these pumps are often used as alternative to rotary vane pumps. A typical application is the use as backing pump for turbomolecular drag pumps. Additionally, the VARIO® design provides vacuum control by precise adjustment of the diaphragm pump´s motor speed. Depending on the application, the demand-responsive motor speed control results in unsurpassed lifetimes of service parts such as diaphragms, as well as optimal performance for backing of turbo pumps.INCLUDED: The VACUUBRAND MV 10 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/mi (more)n (1.2 m3/h) Protection Class IP30 Features - Ideal for extremely aggressive/corrosive gases and vapors - High level of vapor and condensate compatibility - Integrated gas ballast valve - Integrated rotational speed control - 3-color status display for in operation / stand-by / error - Compact, quiet and reliable - Start against ultimate vacuum of the pump - Modular expandable - 100% oil-free transfer - Environmentally friendly The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System is a chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate and two separator flasks on suction and pressure side. Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors. INCLUDED: The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Core 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads This per (more)istaltic pump is ideal for the simple conveying of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump head. By simply flipping the switch, it can also be conveyed in an anti-clockwise direction.Depending on the adapted pump head, a flow rate of 0.83 - 861 ml/min for the single-channel and 0.005 - 364 ml/min for the multi-channel pump head is guaranteed. The Core 120 conveys with a control accuracy of ± 5% at a speed range of 10 - 120 rpm. Features:- Increase your throughput by running up to 12 individual cassettes on one single pump drive and pump head system - Separate metering into multiple vessels with different feed rates in a single operation by using different tubing dimensions to adjust flow rate - Save time: tubing change is done in just seconds - In addition to standard pump heads which feature a 4-roller system you can choose 8-roller pump heads for low pulsation - Change your cassettes easily, even during operation – there are no restrictions - Cassette adjustments and changes are simple, just click in place - No additional purchase of a pump drive needed: upgrade your single-channel pump drive with just one adaptor for multi-channel use and pick the head/cassette configuration that matches your application needs Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Core 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads includes: - Heidolph Core 120 Peristaltic Pump - Adaptor for Multi-Channel Pump Heads - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m 3h-1 / 14.7 ft 3min-1 Features (more) - High ultimate vacuum and rapid pumping speed make it the industry standard for laboratory and light industrial applications - Quiet operation ensures a comfortable working environment, reducing noise in sensitive areas - Freestanding design with a flexible coupling driven by either a single-phase or three-phase (four pole) air-cooled motor for versatile use - Supplied with essential accessories, including 2 x 1 liter of Ultragrade 19 oil, O-ring and centering ring, two Allen keys, and spare seals for oil drain and filter plugs - Features a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces for reliable performance - Includes an oil distribution valve to prevent oil discharge to the pump interior after stopping, enhancing safety - Airtight pumping chambers prevent suckback unless the gas ballast valve is open, maintaining system integrity - Facilitates easy oil changes with an oil drain-plug for gravity or pressure oil drainage Edwards E2M18FX Vacuum Pump 115/230V The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open. You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain. Click Here to View Product Video INCLUDED: The Edwards E2M18FX Vacuum Pump 115/230V includes: - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Hermle Z326K refrigerated centrifuge. Adjustable temperature from -20 ºC to 40 ºC with pre-cooling.  (more)Maximum speed (depending on rotor) 18,000 rpm/23542 xg. Maximum capacity 4*100 mL. Storage up to 99 programs. Timer up to 99 h 59 min or continuous. Low noise level <63 dB. Imbalance alarms and overspeed protection. Includes angular rotor with maximum speed of 6,000 rpm and capacity for 6 50 mL falcon-type tubes and adapters for 15 mL tubes. Dimensions: 400*700*360 mm; 60 kg. User manual. The Hermle Z326 K centrifuge is high-quality laboratory equipment with exceptional performance. This centrifuge is ideal for a wide range of sample separation and purification applications. In addition, it has an advanced cooling system that allows for quiet and efficient operation.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 4 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 1 brush and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.