KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump

This listing is for the Miele Professional G 7859 Medical Washer-DisinfectorOverviewWhite (230 V onl (more)y) or stainless steelElectronic controls with 3 disinfection programmesMeets Department of Health disinfection guidelinesSteam condenserElectro thermal door lockWRAS approvedSpecificationsFreshwater system dishwashers G 7859Frontloader with drop-down door •Freestanding with lid, can be built under •Performance Circulation pump, Qmax [l/min] 400Shortest programme running time [min]* 18Cleaning capacity [plates/h] 100Controls, programmes MULTITRONIC Novo Vario with programmable functions 17Water connection 1 x cold or hot water (max. 70°), 2–10 bar pressure (200–1000 kPa) x1 x cold and hot water (max.70ºC), 2–10 bar pressure (200–1000 kPa) •Drain pump DN 22, head height 100 cm •Mains connection cable approx. 1.7 m •Electrical connection 3N AC 400 V 50 Hz •Heater rating [kW] 8.7Circulation pump [kW] 0.43Total connected [load kW] 9.4Fuse rating [A] 3 x 161N AC 230 V 50 Hz •Heater rating [kW] 5.8Circulation pump [kW] 0.43Total connected [load kW] 6.4Fuse rating [A] 1 x 30Dispenser system 1 x combi dispenser/door for powder and rinsing agent •Accessories DOS G 60 dispenser for liquid detergents •Water softener For cold and hot water up to 70ºC Profi-MonoblocSteam Condenser Heat exchanger •Dimensions, weight External H/W/D [mm] (without lid H = 820 mm) 850/600/600Loading height above floor [mm] 230Weight, unloaded [kg] 76External casing options White casing, plastic lid [WG] •Decor frame for panel H 570 x W 578 x 1.2 mm thick °Stainless steel front, lid sides [AE] •Test certificates CE, VDE, DVGW, WRAS •§ 18 IfSG •Factory fitted baskets and inserts O 881 upper basket for cups/saucers 1U 880 lower basket, empty for various inserts 1E 216 insert 1/2 for 15 plates up to 240 mm Ø 2E 165 cutlery basket 2

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Beckman Coulter Avanti J-20I Refrigerated High Performance Centrifuge Ambient temperature range: 16º (more)C / 38ºC Dimensions: 71.1 W x 86.4 D x 86.4 H cm (28 x 34 x 34") Electrical: 200/208/240 V, 50/60 Hz Maximum speed: 20,000 rpm Setting temperature range: -20ºC to +40ºC Weight: 290 kg (639 lb) Single-phase socket With rotor: JS-4.3 Swinging Bucket Rotor Max: 4300 rpm 4 cups of 683 g Capacity: 4 x 750 mL With adapter for 750ml 96x130mm bottles expiration date: 01/2008 Equipment tested: 4000 revolutions => OK Cold group => OK Year of manufacture: 1997 Slight noise from a motorized fan Note: Commissioning must be carried out by a technician specialized in this type of high performance centrifuge

Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V Temperature Range Ambie (more)nt +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 97L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 97L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Ministar 40 Digital Overhead Stirrer Stirring quantity max. (H2O) 25 L Speed Range 0/50 - 100 (more)0 rpm Viscosity max. 30000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: - Regular software updates can be undertaken rapidly and simply via the USB interface. Click Here to View Product Video INCLUDED: The IKA Ministar 40 Digital Overhead Stirrer includes: - MINISTAR 40 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 40 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)25 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 1000 rpmViscosity max.30000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft40 NcmSpeed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.4 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)70 x 193 x 147 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WPower input standby0.5 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Gilson FC203B Fraction Collector, 110/220VFeatures - Collect fractions by time, drop, or peak to sui (more)t all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software The FC 203B Fraction Collector is an essential tool for low-pressure chromatography and fractionation systems. With its versatile design, it holds one rack and can accommodate various sample configurations, including up to 128 fractions in 12x75mm tubes or up to 105 fractions in 13x100mm tubes. Additionally, it can collect samples in a shallow- or deep-well microplate format. For enhanced efficiency, an optional multicolumn adapter is available, allowing collection from up to 8 separate channels simultaneously. INCLUDED: Gilson FC203B Fraction Collector, 110/220V includes: - Gilson FC203B Fraction Collector - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Exact temperature setting via digital potentiometer Simultaneous digital display of target and actua (more)l temperatures via LCD display Actual temperature displays in medium with 0.1°C resolution when using PT1000 temperature sensor (included) Stirrer can be controlled with two microcontrollers (not included) Plate material: Glass ceramic Plate dimensions: 180 x 180 mm max. stirring capacity (H₂O): 10 L Speed range: 100 – 1500 rpm Dimensions (WxDxH): 215 x 330 x 105 mm Temperature range: 50°C to 500°C Weight: 5 kg