KNF N938.50KT.18 IP20-T Diaphragm Pump

This listing is for a KNF Laboport N 840.3 FT.18 Diaphragm Vacuum Pump.The unit is in full working c (more)ondition and is ready for immidate realese.Chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.100% oil-free displacement, so media cannot be contaminated by transfer, evacuation or compressionHigh resistance to vapours and condensatesChemically resistant, suitable for use with very aggressive and corrosive gases and vapoursMaintenance-free, environmentally friendly; the pumps use no water and so produce no contaminated waste waterApplication: Fluid aspiration, degassing, gel drying, rotary evaporation, centrifugal concentration, distillation.Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller and extends the service life of the diaphragm. All parts that come into contact with the media are comprised of chemically resistant fluorinated plastics.

VACUUBRAND RZ 6 Rotary Vane Vacuum Pump Ultimate Vacuum 0.002 mbar (0.0015 Torr) Maximum Pumping Sp (more)eed 4.0 CFM at 60Hz Number of Stages 2 Features - High flow rates even at vacuum levels approaching ultimate vacuum - High water vapor tolerance due to efficient gas ballast; very good ultimate vacuum even with gas ballast - Vacuum-tight at switch-off; external anti-suckback valve not needed - Large oil volume: Long intervals between oil changes - Ease of maintenance due to telescopic design These powerful rotary vane pumps feature a particularly compact design and low weight for pumps of this capacity. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium to increased gas flow rate. Various packages including pump, oil mist filter, etc. are available. Rotary vane pumps are used when an ultimate vacuum between a few mbar and down to 10-3 mbar must be attained. Typical applications are degassing, lyophilization, fine vacuum distillation and drying chambers. The pumping unit PC 3 is the perfect choice for applications requiring special protection of pump and environment. Designed for use in chemical laboratories, the cold trap helps the pumps to handle large volumes of condensable vapors. The cold trap is metalized for extended coolant life and protected against implosion. INCLUDED: The VACUUBRAND RZ 6 Rotary Vane Vacuum Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF N 860.3 FT.18 IP54-T Diaphragm Pump Ultimate Vacuum 2 mbar Maximum Flow Rate 60L/min (3.6 m 3/h (more)) Protection Class IP54 Features - Clean, 100% oil-free operation - Chemically-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Can handle wet and highly corrosive gases or vapors - Gastight, leakage rate ratio 6 x 10-3 mbar - Maintenance-free The chemically-resistant series N860.3FTP diaphragm pump is KNF's largest laboratory twin-head unit. There is a wide range of applications for this pump in the lab. It is used especially whenever clean vacuum is required. Examples include vacuum-drying of vacuum oven chambers for drying or heat-treating substances and components or larger rotary evaporators, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used with most all solvents. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. INCLUDED: The KNF N 860.3 FT.18 IP54-T Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Rotavac Vario Pumping Unit, 115VFully controllable stand-alone pumping unit including vacuu (more)m controller. For use with For Hei-VAP Value and Hei-VAP Advantage rotavapor models. The precise vacuum control prevents bumping and loss of your samples. Thanks to the automatic vacuum supply to the process parameters, you have more time for important laboratory activities. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducing process time by 30 % - Solvent recovery of up to 99 % - Once the required vacuum is reached, the pump automatically stops and reliably keeps the vacuum at the desired level - Minimized runtime saves energy and significantly increases the lifespan of the diaphragm - These pumps guarantee minimum noise and vibrations during operation - Rpm-regulated pumps achieve the most precise vacuum INCLUDED: The Heidolph Rotavac Vario Pumping Unit, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) Capacity 220 g R (more)eadability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), provides high-precision measurements with a 220 g capacity and 0.0001 g readability. This NTEP-certified balance ensures accurate, reliable results for regulated environments. It includes a fanless ionizer, standard in AEN models, which neutralizes static charges without contact, ensuring stable, disturbance-free weighing. An external IR sensor enables touch-free operation, preserving cleanliness and enhancing accuracy by allowing users to interact with the balance without direct contact. The Electronically Controlled Load (ECL) management system supports repeatability testing and automatic precision checks without external weights, further reinforcing measurement reliability. The GX-224AEN features a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput settings where speed and accuracy are critical. Streamlining daily operations and ensuring USP41 compliance, this advanced tool alerts users when sample sizes fall below minimum weight, reducing waste and boosting efficiency. Impact shock detection and overload protection provide added durability, while six simple keys and a quick toggle function facilitate smooth switching between USB and RS-232C communication options for flexible data management. Enhanced usability features include an illuminated, front-mounted level for easy leveling, even with gloves on, along with automatic self-calibration and one-touch internal/external calibration to ensure valid results. An extensive range of measurement units, along with percent calculation and piece counting capabilities, add versatility for diverse scientific applications. With a robust design, NTEP certification, and advanced features like the IR sensor, the A&D Weighing Apollo GX-224AEN Analytical Balance is an outstanding choice for professionals seeking precise, regulated analytical capabilities. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

WTW OXI 3205 portable oximeter Without probe Waterproof dissolved oxygen measuring instrument Batter (more)y type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (910 x 610mm) with non-slip rubber mat included.

R-PIPETTES PC software is a RADWAG proprietary solution for determination of errors of pipette volum (more)e measurement (batchers) in accordance with the standard ISO 8655. The software supports calibration of fixed volume pipettes (single channel) and adjustable volume pipettes (single channel). The program features database of RADWAG pipettes and enables defining custom pipette models.

Scilogex Carousel Pipettor Stand The Scilogex Carousel Pipettor Stand holds 6 MicroPette Pipettors.  (more) INCLUDED: The Scilogex Carousel Pipettor Stand includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 16,0 (more)00 RPM Maximum Capacity 4 x 750ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5916R Frontier Multi-Pro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty