KNF LIQUIPORT IP65 NF 300 FT.18S Diaphragm Liquid Transfer Pump

Labor port N 96 KNF Compact and portable diaphragm vacuum pump, resistant to chemicals and corrosive (more)s, oil-free. The pump capacity is manually adjustable with a simple knob. Laboport is equipped with gas ballast, PTFE/TFM heads, PTFE lined diaphragms and FFPM valves. It is suitable for a wide range of laboratory applications, including extremely aggressive/corrosive gases and vapours. Technical features - Flow rate (max.) 7 l / min - Final vacuum (max.) 130 mbar (abs.) - Pressure (max.) 2.5 bar (rel.) - Permissible fluid temperature 5-40 °C - Valve material: FKM - Diaphragm material: PTFE coated - Pump head material: PPS Applications - Filtration - Fluid suction - Solid phase extraction Qualitative characteristics - 100% oil-free transfer: transfer, evacuation and compression of gases in a clean and safe way - Extremely small footprint - The PTFE coated diaphragm is ideal for aggressive agents / gases and corrosive vapors - Integrated control of the rotation speed - Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION Presentations of the Laboport line directly from the specialists who created it. English subtitles. Presentation of the new Laborports and SMART KNF control.

Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 Ultimate Vacuum 1 x 10-3 mbar / 7.5 (more) x 10-4 Torr Inlet Connection NW25 Flange Displacement 38.9 m3h-1 / 22.3 ft 3min-1 Features - Displacement of 32.2 m3/h at 50 Hz and 38.9 m3/h at 60 Hz - Maximum pumping speed of 27.5 m3/h at 50 Hz and 33.0 m3/h at 60 Hz - Ultimate vacuum of 1 x 10-4 mbar partial pressure and 1 x 10-3 mbar total pressure - Thermal overload protection with automatic motor reset - Mass spectrometer compatibility for applications like gas analysis and leak detection - Oil-sealed two-stage rotary vane pump with sight-glass and drain-plug for easy maintenance - Maximum water vapor inlet pressure of 30 mbar - Rotational speed of 1440 rpm at 50 Hz and 1720 rpm at 60 Hz The Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 is a high-performance two-stage, direct-drive vacuum pump designed for precise and reliable operation in laboratory and industrial environments. With a displacement of 32.2 m³/h at 50 Hz and 38.9 m³/h at 60 Hz, it delivers a maximum pumping speed of 27.5 m³/h and 33.0 m³/h, respectively. Its ultimate vacuum capabilities include 1 x 10⁻⁴ mbar partial pressure and 1 x 10⁻³ mbar total pressure, ensuring optimal performance for demanding applications. The pump features an oil-sealed design with an integrated sight-glass and drain-plug for easy maintenance, along with thermal overload protection that automatically resets the motor after cooling. Built for versatility, the Edwards E2M28 supports a maximum water vapor inlet pressure of 30 mbar and operates at rotational speeds of 1440 rpm at 50 Hz and 1720 rpm at 60 Hz. Its robust construction includes a fully enclosed motor with a cooling fan to maintain efficient operation. Designed for compatibility with a range of systems, this vacuum pump is ideal for gas analysis, leak detection, mass spectrometry, electron microscopy, and other critical processes. The E2M28 offers dependable performance with features tailored for long-term use and minimal maintenance.Click Here to View Product Video INCLUDED: The Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 includes: - Edwards Ultragrade 19 Oil - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Hanning Elektro-Werke Trivac Vacuum Pump Typ D8B was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been tested with a gauge (not included). It appears to be working well. The power cable is included. It is in good cosmetic condition with some marks from use.

Genevac Boc Edwards Scroll Pump Model XDS5 This item was removed from a university laboratory where  (more)it was surplus to requirements. It powers on and is in good cosmetic condition. Please note: The pump requires connection to a Genevac evaporator to initiate operation. Model: XDS5

Gynkotek  P 580 A HPLC Pump & Dionex UVD 170S UV Detector System This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonably good cosmetic condition with marks from use. It comprises of; 1 x Gynkotek HPLCType - P 580A 1 x Dionex UVD 170SPN - 6068.4000A 1 x Dell Optiplex G1 with Keyboard & MouseModel no. MMPChromeleon Client Version 4.20 Build 350 1 x Box including:-Gynkotek HPLC Pump Series P580 Operating InstructionsGynkotek HPLC UV/VIS Detector UVD 170S/340S Operating InstructionsChromeleon Chromatography Data Systems Version 4.20 Software CD & Tutorial

Dimensions (WxDxH): 600 x 490 x 600 mm

TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories This was removed from a univers (more)ity lab where it was surplus to requirements. The system consists of; 1 x Echo HiVol Hi Volume SamplerModel, Echo Hi Vol110VThe unit powers on and is in good cosmetic condition. It was powered on by our Step down from the mains supply (not included).The buttons seem a little slow to respond and there are some tape marks and scuffs and scratches around the unit from general use. The unit is lockable but no key is supplied. The key is included. 1 x Delta Wireless SamplerElectronic Flow Sampler w/ Battery packModel Delta110VThe unit powers on and is in good cosmetic condition. We did not charge Battery to test, as we used our Step down from the mains supply. (not included). 1 x Delta Battery packThe unit is in good cosmetic condition. It was not tested. 2 x Flight Casea 3x Marigold gloves (size 9)1x Spanner (size 10)2x fuses T6.3AL 250V4X keys1x Widget H0451x TCR Fine PM Air Inlet PM 2.5 200l/min1x Metal Filter attachment2x Glass chambers1x Metal Dome3x Sanitising spray2x TCR TECORA plastic sample trays (3cm diameter)6x Sample dishes with lids (14cm diameter)4x Glass condensers 1x opened 3x factory sealed1x Delta quick guide2x Boxes of Microfibre Discs (1x opened 102mm Dia) quantity unknown(1x sealed 100 Dia) quantity 1001x Flurescein Green Concentrate (bottle partially full, sealed inside a bag it has leaked at some point.1x Air pollution monitoring equipment (Metal chamber with hose)1 x manual1 x TCR Tecora TCR Downloader for Echo Series, Delta & Bravo Plus. There is also a software disk included with this but it is entirely in Italian.

KODAK EKTACHEM DTSC II - DT60 II - DTE II Dry Technology Chemistry Analyze. Blood serum chemistry an (more)alyzer for fast test results. Depending on the module, different measurements can be made: DTSC to measure ALB, ALKP, ALT, AST, Ca, CHE, CK, CRSC, Fe, GGT, LDH, Li, LIPA, THEO DT60: to measure AMILO, TBIL, NBIL, BUN/UREA, CHOL, CREA, GLU, HDLC, LAC, Mg, NH3, PHOS, TP, TRIG, URIC. DTE: to measure CO2, Cl-, K+, Na+ DT60 II analyzer dimensions: width x depth x height: 47.6 x 34.9 x 17.2 cm, weight 11.6 kg. DTE II Module Dimensions: (W x D x H) 14.6 x 35.4 x 16.5 cm, weight 3.6 kg; DTSC Module Dimensions: (W x D x H) 34.3 x 35.4 x 18.0 cm, weight: 7.7 kg The KODAK EKTACHEM DTSC II Dry Technology Chemistry Analyzer is high-precision laboratory equipment designed to perform biochemical testing on blood serum samples. With its advanced technology, this analyzer is capable of measuring a wide range of parameters, such as glucose, cholesterol, triglycerides, uric acid, among others. Its compact and easy-to-use design makes it an ideal tool for clinical laboratories and hospitals. In addition, it has an automatic sample loading system, which speeds up the analysis process and minimizes errors. With the KODAK EKTACHEM DTSC II Blood Serum Analyzer, healthcare professionals can obtain accurate and reliable results in a short time, making it easier to diagnose and treat various diseases.

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Benchmark MyFuge12 Mini Centrifuge Unlike traditional mini centrifuges, the new MyFuge 12 eliminates (more) the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor is all that is required for running 12 microtubes and/or 4 PCR strips. With a fixed speed that produces 2,000 x g, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5,500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples. At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal microcentrifuge with unmatched capacity and flexibilty. INCLUDED: The Benchmark MyFuge12 Mini Centrifuge includes: - COMBI-Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty