KNF LABOPORT SC 840 G IP30 Diaphragm Pumping System w/ Wireless Remote Control

VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pump (more)ing Speed 1.65 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent chemical resistance The MZ 2C VARIO select pump is an excellent solution for labs working with most common solvents. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU-SELECT controller detects the boiling pressure and automatically adjusts the pump to maintain process control. On-demand motor speed control yields not only improved vacuum control, but it also results in unparalleled service intervals for wear parts like diaphragms and valves. Typical applications are all evaporation processes. Evaporation processes can be run fully automatically and with short process times and high sensitivity at the same time. The VARIO control ensures high process reliability through prevention of superheating or foaming. The control allows for automatic vacuum level adaptation and is self-adapting to changing process parameters at any time. The VACUU-BUS interface facilitates a user-friendly configuration of even complex vacuum installations. INCLUDED: The VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer MVP 040-2 Diaphragm Pump Final Pressure 4 hPa / 3 Torr / 4 mbar Maximum Pumping Speed 2.5 (more) m 3/h / 1.4715 cfm / 41.6675 l/min Number of Heads/Stages 2/2 Features - Diaphragm pump with a pumping speed of up to 2.5 m3/h - No hydrocarbons: Completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 040-2 Diaphragm Pump delivers up to 2.5 m³/h pumping speed, making it a powerful and efficient option for laboratories and industrial environments. This oil-free, dry diaphragm pump operates without hydrocarbons, ensuring a clean process. With a low noise level of 53 dB(A) and minimal vibrations, it’s ideal for noise-sensitive settings. Its compact design and global voltage compatibility (100 – 230 V AC) make it versatile for worldwide use. Featuring a final pressure of 4 hPa (3 Torr) and a gas ballast option, the MVP 040-2 offers precise control and reliability. Long maintenance intervals reduce operating costs, while the IP40 protection rating and cTUVus certification ensure safety and durability. Weighing only 11.4 kg, it’s lightweight and easy to integrate, making it a dependable choice for a wide range of applications. INCLUDED: The Pfeiffer MVP 040-2 Diaphragm Pump includes: - Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Speed  (more)1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance - High performance even at low vacuum levels - Optimized vacuum even with gas ballast for condensate purge - Whisper quiet and low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The pump MZ 2C NT is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. This pump is our most popular chemistry diaphragm pump, and is the heart of a family of VACUUBRAND pumping systems. The NT-series features further improved performance data and superior vapor tolerance. Two-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with medium vacuum requirements. They do not consume water and therefore do not produce any contaminated waste water. The media contacted materials made of chemically resistant fluoroplastics open a wide range of applications in chemistry and pharmaceutics. The robust design provides very good durability and long service intervals even in demanding chemistry applications. Typical usages are vacuum generation for rotary evaporators, vacuum concentrators, gel dryers, vacuum ovens and many other laboratory applications. The MZ 2C NT is the powerful basic pump for a complete family of well established and reliable chemistry vacuum systems and pumping units.INCLUDED: The VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF N860.3FT.40.18 IP54-T Diaphragm Pump Ultimate Vacuum 4 mbar Maximum Flow Rate 60L/min (3.6 m3/h (more)) Protection Class IP54 Features - Clean, 100% oil-free operation - Corrosion-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Self-drying system removes condensate without affecting the vacuum level - Maintenance-free KNFN860.3FT.40.18 IP54-T Diaphragm Pump is a twin-head unit with an integrated KNFself-drying system. Designed for a wide range of applications in laboratories,including vacuum drying of chambers (for drying or heat-treating substances andcomponents) or steam sterilizers for sterilizing instruments, vessels, filters andtextiles. The KNF N860.3FT.40.18 IP54-T Diaphragm Pump can be used veryuniversally due to its high resistance to aggressive media. The KNFself-drying system allows condensed liquid to be blown out of the pump heads ata high speed during evacuation. The drying cycle can be adjusted to therequirements of the individual process using three variables. The KNFN860.3FT.40.18 IP54-T Diaphragm Pump is chemical-resistant, therefore suitable forhighly aggressive or corrosive gasses and vapors.INCLUDED: The KNF N860.3FT.40.18 IP54-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LABOPORT SC 840 G IP30 Diaphragm Pumping System w/ Wireless Remote Control Ultimate Vacuum 6 mba (more)r Maximum Flow Rate 34L/min (2.04 m3/h) Protection Class IP30 Features - Automatic, accurate recognition and monitoring of the boiling point using the integrated ramp function - High recovery rates even with low boiling point solvents - Remote-controlled for safe operation from outside closed fume hoods - ATEX compliant to (Ex) II 3/-G Ex h IIB+H2 T3 Gc internal atmosphere only - Easy, intuitive control via touchscreen display and precise rotation knob - Four operating modes for nearly all common lab applications - Integrated rotation speed control for precise vacuum control - Integrated gas ballast valve - Environmentally friendly Chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side, high performance condenser on pressure side and vacuum controller. Ideal for rotary evaporation and other applications where control of vacuum level is important. INCLUDED: The KNF LABOPORT SC 840 G IP30 Diaphragm Pumping System w/ Wireless Remote Control includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - USB Cable for Connecting to PC - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Technical features Flow rate 0.5–3.0 l/min Suction (max.) 3 mWg Operating pressure (max.) 1 bar (rel (more).) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sens (more)or & Sensor StandThe SCI340-ProT is one of the most technically advanced hotplate-stirrers in the marketplace and features an independent back-lit LCD display for both heat, stirring and timer functions and PID technology. The MS-H-Pro-T controls temperature at +/- 1ºC. Simply set the timer from 1min to 99hr-59min and the hotplate will heat at the target temperature for the set time period and automatically turn off. If the stirring function is activated, the unit will continue to stir until switched off. The MS-H-Pro-T also has a DC brushless (spark free) motor for extremely long life and excellent performance. SCILOGEX 340°C magnetic hotplate stirrers include all leading safety standards and features for superior ease of use and are cost-effective. They are widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals, etc.Product Features - Heat only, stir only or heat and stir together functions, High-resolution LCD display shows actual temperatures and speed. - Digital speed control with max. speed up to 1500rpm - External temperature control is possible by simply connecting a PT-1000 temperature sensor (sold separately) with accuracy at ±0.2°C. - Max. stirring quantity of H2O at 20L. - RS232 function provides PC control and data transmission (free software available) - Wide range timer function from 1min to 99h59min (MS-H-ProT only) - The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off. - Automatic spin bar retrieval - Low temperature stability - Digital temperature control with max. temperature at 340°C - Stainless steel work plate with ceramic coating provides good chemical-resistant performance. - Accessory reaction blocks for flasks and vessels available sold separately. - Electronic speed control for constant speed even during changes in load - Brushless DC motor is maintenance free. - High magnetic adhesion - Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar. Click Here to View Product Video INCLUDED: The SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - PT 1000 Temperature sensor and stand - Two Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid, North America Plug & Recep (more)tacleUsingcentrifugal force, vacuum and controlled heat, the Acid-Resistant CentriVapVacuum Concentrator rapidly concentrates multiple small samples containingchemicals such as 0.1 to 1% TFA, hydrochloric acid, acetic acid, hydrobromicacid, ammonium hydroxide and sodium hydroxide. Components in the vapor path areconstructed of corrosion-resistant materials for long life. Click Here to View Product Video INCLUDED: The Labconco 7310042 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, North America Plug & Receptacle includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty