KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND MD 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 1.5 mbar Max. pumping speed at 60 Hz  (more)2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance. Three-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with high vacuum requirements. Typical applications are parallel and rotary evaporators, concentrators, drying ovens and many other laboratory applications. The MD 4C NT has an outstanding performance for pumping large amounts of vapor, e.g., out of drying ovens and gel dryers. This powerful pump is at the heart of a complete family of well-proven and reliable vacuum systems and pumping units for larger lab applications.INCLUDED: The VACUUBRAND MD 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience 3860T56A1C0D Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20C to 40C) Refrigeran (more)t R-404A Temperature Range -20° to 40°C Cooling Capacity 5000W @ 20°C Features - High capacity cooling for lasers, electron microscopes, and other laboratory applications - Small footprint conserves floor space - Displays temperature and pressure or flow rate simultaneously - User-adjustable temperature, pressure, and flow rate alarms - Simple operation and low maintenance DuraChill Chillers offer powerful cooling for demanding applications and serve as a cost-effective alternative to tap water cooling systems. Equipped with a microprocessor-based controller, these chillers provide a digital temperature display (in °C or °F), one-touch set point display, and a digital pressure/flow rate display (in PSI, kPa, GPM, LPM) with easy push-button selection. The inclusion of a modulated refrigeration system enhances cooling efficiency and performance, resulting in improved temperature stability and extended compressor life. With its high-capacity cooling capability, the 3860T56A1C0D is ideal for applications involving lasers, electron microscopes, and other laboratory equipment. The system features dual displays, allowing users to conveniently monitor temperature and process pressure or flow rate simultaneously. User-adjustable alarms for temperature, pressure, and flow rate enable precise control and monitoring. Despite its powerful performance, the chiller has a small footprint that conserves floor space and facilitates seamless integration into laboratory setups.INCLUDED: The Polyscience 3860T56A1C0D Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20C to 40C) includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN816.1.2KT.45P IP20-T Diaphragm Pump Ultimate Vacuum 160 mbar (abs.) Maximum Flow Rate 30L/min (more) (1.8 m3/h) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Compact, quiet and reliable - Can handle wet vapors without damage - Maintenance-free TheKNF UN816.1.2KT.45P IP20-T Diaphragm Pump is a single-head, dry-running device used in a wide range oflaboratory applications. They transfer, compress and pump down withoutcontamination. The heart of these very compact pumps is a KNF structureddiaphragm. This patented diaphragm was stress-optimized using the FiniteElements method. As a result, KNF was able to make the pump smaller whileincreasing the service life of the diaphragm. This pump is 115V. INCLUDED: The KNF UN816.1.2KT.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R1 Single Channel The Gilson MINIPULS 3 Peristaltic Pump He (more)ad, R1 Single Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R1 Single Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards mXDS3s Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5  (more)m^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3s Dry Scroll Pump includes: - Inlet Isolation Valve - Exhaust Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Heidolph Hei-VAP Ultimate HL/G5 Non Coated Hand Lift w/ G5 Dry Ice CondenserThe Hei-VAP Series of ro (more)tary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 7" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Ultimate HL/G5 Non Coated Hand Lift w/ G5 Dry Ice Condenser includes: - Heating Bath - Control Panel - G5 Dry Ice Condenser - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixe (more)d Angle Rotor is a whisper quiet microcentrifuge offering an outstanding set of features for a broad range of molecular and cell biology applications. Short runs up to 12 minutes are whisper quiet at an average noise level of 45 dB(A) and maximum RCF of up to 21,300 x g. This is sufficient for centrifugation steps of most routinely used DNA/RNA purification kits. The 5425 also features a wide speed range, with a minimum speed of 100 RPM and a maximum speed of 15,060 RPM. With a comprehensive range of 6 rotors as well, this broadens the spectrum of applications of the 5425. The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor includes: - FA-24x2 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor SpecificationsMaximum Speed15,060 RPMMaximum RCF21,300 x gMaximum Capacity24 x 1.5/2.0 ml 10 x 5.0 mlTemperature RangeN/ATimer10 seconds to 9:59 hours, with continuous runAcceleration Time15 secondsDeceleration Time15 secondsDimensions (W x D x H)9.45 x 15.35 x 9.45 in. (24 x 39 x 24 cm)Weight34.39 lb. (15.6 kg)Electrical Requirements120V, 50/60Hz, 3.8A, 280WRefrigerationNo Refrigeration

Arctiko ULUF 65 -86°C Ultra Low Undercounter Freezer Temperature Setting -40°C / -86°C Volume 1.9 cu (more). ft. (54L) Cooling System Single System / Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - Direct cooling features evaporator coils to cool each compartment directly for maximum uniformity and minimal recovery time - A heated door frame prevents ice from building up around the gasket securing a stable and uniform temperature inside the freezer - The user friendly G214 controller is standard and includes different alarms such as visual, acoustic, open door, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - 100% HCFC & CFC free The Arctiko ULUF 65 -86°C Ultra Low Undercounter Freezer will add a new dimension to your laboratory. The freezer can be used as either a benchtop or undercounter model. The compact space-saving design and low noise level makes it a perfect storage solution for your laboratory. The ULUF -86°C series is produced with the true and original single compressor technology which allows for such a small sized unit. The single compressor technology is specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. Despite the small size of the ULUF 65, users can expect very reliable performance from this ultra low freezer. INCLUDED: The Arctiko ULUF 65 -86°C Ultra Low Undercounter Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Request an offer from our product manager or visit our blog.

Capacity: 34 L Daily evaporation: 0.17 L/day Dynamic endurance: 125 days Neck diameter: 91 mm Canist (more)ers: 6 Vial Capacity: 684 Weight (empty/full): 16.1/43.5 kg