KNF IP65 UFEM 1.10 FT.18RCP2 Liquid Pump

Technical features Flow rate (max.) 16 l / min Ultimate vacuum (max.) 20 mbar (abs.) Operating press (more)ure (max.) 0.5 bar (rel.) Permitted fluid temperature 5-40°C FFPM valve material Membrane material PTFE coating PPS pump head material Applications Filtration Degassing Drying Aspiration of fluids Solid phase extraction Qualitative characteristics Clean operation, 100% oil free Corrosion resistant Compact, silent and reliable Small footprint Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Pfeiffer MVP 015-2 Diaphragm Pump Final Pressure 3.5 hPa / 2.625 Torr / 3.5 mbar Maximum Pumping Sp (more)eed 0.7 m3/h / 0.41202 cfm / 11.6669 l/min Number of Heads/Stages 2/2 Features - Diaphragm pump with a pumping speed of up to 0.7 m3/h - No hydrocarbons, completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 015-2 Diaphragm Pump is a high-performance, completely dry and oil-free diaphragm pump that operates without hydrocarbons. With a maximum pumping speed of 0.7 m3/h and a final pressure of 3.5 hPa / 2.625 Torr / 3.5 mbar, this pump is designed for efficiency and durability. It features two heads and two stages, ensuring robust operation. The pump is also equipped with gas ballast to handle a final pressure up to 4.5 hPa / 3.375 Torr / 4.5 mbar. Its compact design, low noise level, and minimal vibrations make it ideally suited for laboratory use. It operates with low maintenance costs and long intervals between maintenance. The MVP 015-2 supports all worldwide voltages and includes features like forced convection air cooling and an integral leak rate of 5 x 10-4 Pa m3/s. Both the intake and exhaust pressures can handle up to 1,100 hPa. For connections, it utilizes G 1/8" flanges, with the exhaust incorporating a silencer. This pump is also cTUVus certified according to UL / CSA 61010-1, ensuring compliance with safety standards, and is classified under protection degree IP20/Type 1. INCLUDED: The Pfeiffer MVP 015-2 Diaphragm Pump includes: - Silencer - G 1/8" Elbow Union w/ Enclosed Hose DN 6 x 1000 mm w/ a Straight Union in G 1/4" at End - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) with Eight Channel, Standard Flow Head (R8)Features - Utilizes p (more)ositive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) with Eight Channel, Standard Flow Head (R8) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump The Eppendo (more)rf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump (catalog number 022820168) was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. The advanced heating technology provides best treatment for your sample which assures quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. Our new coated lid provides superior chemical resistance against aggressive acids and organic solvents . INCLUDED: The Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump includes: - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump SpecificationsVacuum20 hPa (20 mbar)Sample Capacitymax. 144 vessels/2 microplatesFixed Speed1,400 rpmTube Volume0.2-50mlVolume Range72mlPower Supply120 V, 50-60HzMax. Power Consumption350WDimensions (W x D x H)33 x 58 x 29cmWeight w/o accessories31.5kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dispersion rod S 25 KV - 25G for IKA T25 digital ULTRA-TURRAX New material in original packaging For (more) homogenizer IKA T25 digital ULTRA-TURRAX Model: S 25 KV - 25 G (S25KV-25G) Processed capacity (H2O): 0.05 - 2 l Stator diameter: 25 mm Rotor diameter: 17 mm Stator-rotor gap: 0.5 mm Max. permissible speed : 25000 rpm Peripheral speed : 22.2 m/s Immersion depth : 40 - 225 mm Total length : 270 mm Material in contact with the product : FFPM / SIC, AISI 316L, AISI 302 pH 2 - 13 Solvent resistant : yes Max. working temperature : 220 °C Sterilization methods : all methods Vacuum : 1 mbar Max. pressure : 6 bar Final fineness, suspension : 15 - 50 µm Final fineness, emulsions : 1 - 10 µm Weight : 0.6 kg

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW