KNF FLODOS STEPDOS 03 Diaphragm Metering Pump System Lab

Edwards nEXT240D - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6×10⁻⁸ mbar Inlet Connection  (more)DN100ISO-K Peak Pumping Speed (H2) 165 l/s Features - Reaches an ultimate pressure of 6.000 × 10⁻⁸ mbar for precise vacuum applications - Features built-in electronics compatible with TAG and TIC controllers for easy system integration - Allows for in-field servicing with minimal tooling, reducing maintenance time and cost - Upper magnetic bearing ensures clean vacuum conditions, low power consumption, and reduced vibration - Incorporates a molecular drag stage for improved pumping speed and compression ratios - Designed for long-lasting performance and low cost of ownership, enhancing value - Comes with a standard inlet screen to protect the pump and ensure optimal functionality - Offers a high level of modularity for maximum flexibility and customization nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240D - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

Edwards nXDS20i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Click Here to View Product Video INCLUDED: The Edwards nXDS20i Dry Scroll Pump includes: - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 KT.18S Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit mo (more)st laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 KT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 TT.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 TT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 TT.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. The KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump is brand new in box . Includes a 1 Year Full Parts and Labor Warranty. KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump SpecificationsWeight2 lbs., 0.9kgConnection Tubing ID1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°CPermissible Liquid Media Temp Range5 - 80°CPump HeadPVDFDiaphragmPTFE coveredValvesFFKMDimensions (L x W x H)5.9 x 5.7 x 3.7in (150 x 144 x 93mm)Maximum Suction9.8 ft of waterMaximum Pressure85 psig, 6 barPower Consumption24WLiquid Flow Rate1-100 ml/minLiquid Dosing Volume1-999 mlFunctionsManual Operation (S Version)Electrical100 – 240VComparison of ModelsSpecificationKNF IP65 UFEM 1.10 FT.18RCP2KNF IP65 UFEM 1.10 FT.18S2KNF IP65 UFEM 1.10 KT.18RCP2KNF IP65 UFEM 1.10 KT.18S2KNF IP65 UFEM 1.10 ST.18RCP2KNF IP65 UFEM 1.10 ST.18S2KNF IP65 UFEM 1.10 TT.18RCP2KNF IP65 UFEM 1.10 TT.18S2Connection Tubing¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4 mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°CPermissible Liquid Media Temp Range5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°CPump HeadPTFEPTFEPPPTFEStainless SteelStainless SteelPVDFPVDFValvesFFKMFFKMFFKMFFKMFFKMFFKMFFKMFFKMLiquid Flow Rate1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/minLiquid Dosing Volume1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 mlFunctionsN/AN/AN/AManual Operation (S Version)N/AManual Operation (S Version)N/AManual Operation (S Version).comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump The Scilogex STORM5000 and STORM5000C di (more)aphragm vacuum pumpsare durable and chemical resistant. All contact surfaces are PTFE coated.STORM5000.STORM5000C vacuum pumps come with a liquid inlet trap and vacuumregulator making it a perfect choice for vacuum filtration, desiccation, andother mid-range vacuum applications. They are also bleach resistant, allowingthem to be used with cell culture decontamination protocols. INCLUDED: The Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. 7.5" L x 5.5" W x 6"

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 7540400 150ml Complete Fast-Freeze FlaskThe Labconco 7540400 150ml Complete Fast-Freeze Fla (more)sk consists of 7542400 Flask Bottom, 7544200 Flask Top and a supply offilter paper. Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper. Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports. Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C. INCLUDED: The Labconco 7540400 150ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic BA310 Digital LED Compound Microscope Magnification Range 4x to 100x Optical System Colour Cor (more)rected Infinity (CCIS) Illumination Koehler 3W LED Features - Binocular head Siedentopf type, 30º inclined with built-in digital camera CMOS 1/2” chip - 3MP - 2048x1536 pixels with USB2.0 output - Widefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces, with rubber eyecups - Reversed quintuple revolving nosepiece - CCIS EF-N Plan Achromatic objectives EF-N PL 4X, 10X, 40X S, 100X S Oil - Coaxial coarse and fine focusing system with tension adjustment - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.90/1.25 with iris diaphragm and slot - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The new Motic BA310 Digital LED Compund Microscope is designed for the rigors of daily routine work specifically for diverse applications in Hematology and Cytology. The BA310 Digital is a version of the BA310 featuring a built-in 3.0MP sensor. The demands placed on any routine microscope for daily work needing careful focus on every microscope detail. The new BA310 series features a powerful adjustable light source to meet both delicate and detailed lighting requirements for all sample types while the fully featured Koehler illumination helps in highlighting even the weakest stained specimens. New CCIS EF-N Plan Achromat objectives provide optimal image contrast through newly designed multi-layer lens coatings. Click Here to View Product Video INCLUDED: The Motic BA310 Digital LED Compound Microscope includes: - Widefield high eyepoint eyepiece N-WF10X / 20mm with diopter adjustment - Built-in Digital Live Hi-Res Imaging Camera (5MP Resolution USB 2.0) - Reversed quintuple revolving nosepiece - CCIS EC Plan Achromat Objectives 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.9 with iris diaphragm and slot - 45mm blue filter, immersion oil (5mL), power cord, allen hexagonal key, vinyl dust cover - Koehler illumination 3W LED with intensity control - Motic Images Plus 3.0 for PC and MAC - Calibration Slide - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The CliniMACS Prodigy represents the next generation in automated cell processing. This device offer (more)s advanced integrated solutions to streamline cell processing workflows – from cell separation through cell culture to formulation of the final product. The CliniMACS Prodigy offers a flexible platform for cell processing applications enabling the magnetic separation of different cell types as well as customized cell processing protocols. The cell processing unit for fully automated washing, fractionation and cultivation of cells represents an integral component of the device. These processing steps take place in a single-use chamber, which is included as part of specific CliniMACS Prodigy Tubing Sets. The magnetic cell separation unit comprises a second integral component, enabling the separation of virtually any cell type. Pump speed: 2 – 400 mL/min Atmosphere control: Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control: +4 °C to +38 °C Centrifugation: Max. 2,500 rpm (400×g) Microscope camera: Max. magnification: 400-fold MACS tube sealer: For sealing CliniMACS Prodigy Tubing Sets PVC tubes Types of starting material: Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps: Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Dimensions (WxDxH): 735 x 400 x 480 mm Weight: 70 kg

Manufacturer: Martin Christ Model: Christ RVC 2-33 CDplus Concentrator Description: The Maxi Concent (more)rator is a compact, versatile benchtop unit for fast and efficient vacuum concentration. The modern technology with speed-controlled magnetic drive, automatic ventilation, system-controlled switching on and off of the vacuum ensure an optimal process without splashing of the samples. This maxi-concentrator ensures optimal and gentle treatment of liquid samples. The glass lid features high resistance to organic solvents (e.g. TFA, DMSO). Key features: - The maxi-concentrator: versatile system for large sample volumes and almost all common solvents - Rotor capacity from 216 x 1.5/2.2 ml tubes up to 12 x microtiter plates or 4 x deepwell plates - steel/glass composite lid with window (corrosion resistant) - powerful drive system, 1,550 min-1 (500xg f. microliter tubes), avoids boiling delay (e.g. with DCM) - almost insensitive to unbalance (> 50xg)   Technical data: Dimensions of basic unit (H x W x D): 315 mm x 390 mm x 536 mm weight: 44 kg Variable speed: max 1550 min-1 Temperature control range: + 30 °C to + 80 °C Vessel volume: 1 ml - 150 ml Sample capacity: max 216 Eppendorf Caps   Scope of delivery:   - Christ RVC 2-33 + Alpha 2-4 LD Plus + Vacuubrand RC6 Pump - Instruction manual as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.