Ismatec MI0267 Z-040 GJ-N21.FF1S.B B-Mount-Hohlradpumpenkopf Mikropumpe

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

VACUUBRAND MZ 1C Chemistry Diaphragm Pump Ultimate Vacuum 12 mbar / 9 torr Maximum Pumping Speed 0.5 (more) cfm at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - Convenient, quick and simple to use due to the top mounted power switch. - Optimized vacuum even with gas ballast for continuous purge. - Whisper quiet and very low vibration. - Maintenance-free drive system and proven long diaphragm life. Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE-sandwich diaphragms increase reliability and extend operating life. The MZ 1C pump is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. It features slim design for space-saving installation and good vacuum performance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. Two-stage chemistry-design diaphragm pumps are an excellent choice for continuous, oil-free pumping of gases at medium vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are rotary evaporators, gel dryers, filtrations and many other lab applications. The MZ 1C is a powerful pump for smaller vacuum apparatus enabling continuous pumping of solvent vapors. It´s a compact, stand alone pump with low ultimate vacuum. If the process requires atmospheric condensation of pumped vapors or electronic vacuum control, we recommend the pump families based on the MZ 2C NT or MD 1C. INCLUDED: The VACUUBRAND MZ 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer MVP 015-2 Diaphragm Pump Final Pressure 3.5 hPa / 2.625 Torr / 3.5 mbar Maximum Pumping Sp (more)eed 0.7 m3/h / 0.41202 cfm / 11.6669 l/min Number of Heads/Stages 2/2 Features - Diaphragm pump with a pumping speed of up to 0.7 m3/h - No hydrocarbons, completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 015-2 Diaphragm Pump is a high-performance, completely dry and oil-free diaphragm pump that operates without hydrocarbons. With a maximum pumping speed of 0.7 m3/h and a final pressure of 3.5 hPa / 2.625 Torr / 3.5 mbar, this pump is designed for efficiency and durability. It features two heads and two stages, ensuring robust operation. The pump is also equipped with gas ballast to handle a final pressure up to 4.5 hPa / 3.375 Torr / 4.5 mbar. Its compact design, low noise level, and minimal vibrations make it ideally suited for laboratory use. It operates with low maintenance costs and long intervals between maintenance. The MVP 015-2 supports all worldwide voltages and includes features like forced convection air cooling and an integral leak rate of 5 x 10-4 Pa m3/s. Both the intake and exhaust pressures can handle up to 1,100 hPa. For connections, it utilizes G 1/8" flanges, with the exhaust incorporating a silencer. This pump is also cTUVus certified according to UL / CSA 61010-1, ensuring compliance with safety standards, and is classified under protection degree IP20/Type 1. INCLUDED: The Pfeiffer MVP 015-2 Diaphragm Pump includes: - Silencer - G 1/8" Elbow Union w/ Enclosed Hose DN 6 x 1000 mm w/ a Straight Union in G 1/4" at End - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS46iC Dry Scroll PumpFeatures - Peak pumping speed of 23.5 CFM - Ultimate vacuum of 0.05 m (more)bar (0.04 Torr) - Bearing shield ensures separation between process gases and bearing lubrication to ensure a clean vacuum and no possibility of contamination to lubrication from process gases, which prolongs bearing life - Axial air gap motor reduces overall pump size and gives low power and noise - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single-sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time - Fitted with Chemraz internal valve pads and stainless steel exhaust port for increased corrosion resistance XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. This C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. This C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port. INCLUDED: The Edwards XDS46iC Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101  (more)Vibration frequency: 0 - 300 min⁻¹ Heating power: 1500 W Temperature Range: Up to 100°C W×D: 480×487 mm Included: Rack R-12 Polyvap (120ml) A condensation unit and bottle A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

BrandTech Scientific Transferpette S-12 Multichannel M12-10, 0.5 to 10ul Pipette Volume Range 0.5 to (more) 10 ul Accuracy 1.6% / 0.16 ul at 10 ul Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - 360° rotating pipetting unit for personalized comfort and flexible operation - O-ring system ensures easy mounting and ejection of tips, reducing strain during use - Individually removable nose cones and seals for easy cleaning and maintenance The BrandTech Scientific Transferpette S-12 Multichannel M12-10, 0.5 to 10 ul Pipette is designed for precision and efficiency in high-throughput liquid handling tasks. With twelve channels and an adjustable volume range of 0.5 to 10 ul, this pipette is ideal for applications such as PCR setup, microplate assays, and small-volume dispensing. Its flexible volume settings—10 ul, 5 ul, and 1 ul—allow for versatile handling of small liquid volumes with high accuracy. Engineered for ergonomic comfort, the Transferpette S-12 minimizes hand fatigue with its lightweight design and low operating forces, making it perfect for extended pipetting sessions. True one-handed operation enables seamless volume adjustment, pipetting, and tip ejection without changing grip, streamlining lab workflows. Volume-change protection prevents accidental adjustments, ensuring consistent and precise results. Equipped with Easy Calibration technology, the pipette allows for quick, tool-free recalibration to maintain optimal performance. Built for durability with high chemical and UV resistance, the Transferpette S-12 Multichannel M12-10 is the perfect solution for reliable, precise liquid handling in demanding laboratory environments.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S-12 Multichannel M12-10, 0.5 to 10ul Pipette includes: - 2 x TipBox - Shelf Mount - Reagent Reservoir - Mounting Wrench - Silicone Grease - 1 Set of Sealing Rings - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Leica DM IRB/E Inverted Motorised Microscope was removed from a university lab where it was sur (more)plus to requirements. The item is in reasonable cosmetic condition. Parts of it are discoloured from dust/age while there are some stains in the joints/corners. The item is missing its stage and doesn't come with any additional components such as the electronic nosepiece control and a PSU for the light. The item powers on without issue but without a stage and the extra components we were unable to test it further. Included with this unit are the following:1x Leica cover 2x Leica eyepiecesL Plan 10x/20 M 1x Leica 476DI 5x objective506087∞/-/AN Plan5x/0.12 1x Leica Germany objective506205L 40x LMC∞/0-2/CHCX PL FluotarL 40x/0.60 CORR LMC