INTERSCIENCE DILUFLOW single pump gravimetric dilutor

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Technical features Flow rate (max.) 16 l / min Ultimate vacuum (max.) 20 mbar (abs.) Operating press (more)ure (max.) 0.5 bar (rel.) Permitted fluid temperature 5-40°C FFPM valve material Membrane material PTFE coating PPS pump head material Applications Filtration Degassing Drying Aspiration of fluids Solid phase extraction Qualitative characteristics Clean operation, 100% oil free Corrosion resistant Compact, silent and reliable Small footprint Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Edwards iQDP80 Dry Vacuum Pump Lab This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition, and we have been advised by the previous owner that it is in good working order. Edwards iQDP80 Dry Vacuum PumpSerial No6397149Code No. IQ2100103 XS Power supply cable & control module not included.

KNF IP65 FEM 1.02 FT.18RCP Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The FEM 1.02 ST.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 FT.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Sacher Lasertechnik Lasertex Laser System was removed from a university lab where it was surplu (more)s to requirements. The control unit does not power on so we were unable to test the laser. There is no key with it.  We think this is how it is activated and likely why it won't power up. It comes with a control unit to laser cable and 2 cables for computer connection. There is also a box labelled 'Security Check Box' with 2 pieces inside. Both units are in good, used cosmetic condition. Control UnitModel - MLD1000 LaserModel - TEC500

Ohaus SHWV02AL Waving ShakerThe OhausSHWV02AL Analog Waving Shakers are an easy and economical optio (more)n for all ofyour waving needs. Ideal for cell culture and blotting applications, and isdesigned to be used in a variety of environmental conditions.The SHWV02ALis designed for use in a range of lab applications in a variety ofenvironmental conditions. Waving Shakers offer a smooth, low-foaming, 3D wavemotion for precise speed control. All models include a non-slip mat, and mostmodels are available with a stacking tray option.Microprocessorcontrol allows independent control knobs for tilt, speed and time.Timerdisplays elapsed time or when programmed to a set time, will turn off when timereaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHWV02AL Waving Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment LPB 223I Luna Precision Balance, 220g, 0.001g Capacity 220g Readability 0.001g Repea (more)tability 0.002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LPB 223I Luna Precision Balance, 220g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty