Heidolph Single-Channel Pump Head SP Vario

Simple liquid pump with a small reservoir for the circulation of liquids

This item has just arrived in our stock. Please enquire for further details.

VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pump (more)ing Speed 1.65 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent chemical resistance The MZ 2C VARIO select pump is an excellent solution for labs working with most common solvents. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU-SELECT controller detects the boiling pressure and automatically adjusts the pump to maintain process control. On-demand motor speed control yields not only improved vacuum control, but it also results in unparalleled service intervals for wear parts like diaphragms and valves. Typical applications are all evaporation processes. Evaporation processes can be run fully automatically and with short process times and high sensitivity at the same time. The VARIO control ensures high process reliability through prevention of superheating or foaming. The control allows for automatic vacuum level adaptation and is self-adapting to changing process parameters at any time. The VACUU-BUS interface facilitates a user-friendly configuration of even complex vacuum installations. INCLUDED: The VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN816.1.2KT.45P IP20-T Diaphragm Pump Ultimate Vacuum 160 mbar (abs.) Maximum Flow Rate 30L/min (more) (1.8 m3/h) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Compact, quiet and reliable - Can handle wet vapors without damage - Maintenance-free TheKNF UN816.1.2KT.45P IP20-T Diaphragm Pump is a single-head, dry-running device used in a wide range oflaboratory applications. They transfer, compress and pump down withoutcontamination. The heart of these very compact pumps is a KNF structureddiaphragm. This patented diaphragm was stress-optimized using the FiniteElements method. As a result, KNF was able to make the pump smaller whileincreasing the service life of the diaphragm. This pump is 115V. INCLUDED: The KNF UN816.1.2KT.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 3000 Automated Calorimeter Package 1/12 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling by touch screen operation or a standard USB mouse - Two different starting temperatures to choose from (22°C, 30°C) - Automatic ignition, automatic water filling and draining, automatic oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analyses - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new upside down crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 1/12 combines cutting-edge technology and user-friendly design to deliver precise calorific value measurements with exceptional efficiency. Featuring a responsive touch screen interface and the option to operate via a standard USB mouse, this calorimeter simplifies complex workflows. Its fully automated systems for ignition, water filling and draining, and oxygen filling reduce manual intervention, making it ideal for laboratories with demanding analysis requirements. With the ability to choose between two starting temperatures (22°C and 30°C), the C 3000 adapts to a variety of experimental setups for maximum flexibility. Engineered for accuracy and performance, the C 3000 offers up to six dynamic measurements per hour with a reproducibility of 0.15% RSD and four isoperibol measurements per hour with an impressive reproducibility of 0.05% RSD. The spherically shaped decomposition vessel enhances pressure stability and accelerates heat transfer, ensuring reliable results every time. Six integrated temperature sensors continuously monitor all critical parameters, while the innovative upside-down crucible holder simplifies sample preparation. With support for cooling via a compatible RC 2 Basic chiller, this calorimeter ensures consistent performance even during high-throughput workflows. The IKA C 3000 excels in connectivity and data management, featuring interfaces such as Ethernet, RS232, USB, and an SD card slot. Built for durability, it operates within a working temperature range of 22 to 30°C and meets rigorous international standards, including ASTM, ISO, and DIN specifications. Compact yet robust, with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 63.9 pounds, the C 3000 fits seamlessly into laboratory environments. With its advanced automation, exceptional precision, and versatile capabilities, the IKA C 3000 Automated Calorimeter Package 1/12 is the perfect solution for laboratories focused on quality and efficiency. INCLUDED: The IKA C 3000 Automated Calorimeter Package 1/12 includes: - C 3000 Measuring Cell - C 6012 Decomposition Vessel, Halogen Resistant - RC 2 Basic Recirculation Chiller - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Thermo Electron Holten LaminAir Flow Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The item powers on with air flowing but the screen was flashing red with an alarm when powered on, this stopped when the door was opened. The door & white light works although the door is a bit stiff. It comes with one key. It is in good cosmetic condition but has some marks from use. Internal Dimensions - D64 L150 H60cm Hours? 5542

ValleyLab Force 2 Electrosurgical Generator Lab This item was removed from a university where it was (more) surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Memmert IF55 Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 53 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF55 Forced Circulation Incubator 53L, 115V offers precise temperature control and efficient forced air circulation, making it ideal for a variety of laboratory applications. With a setting temperature range of +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures consistent performance for temperature-sensitive processes. The spacious 53L (1.1 cu.ft.) interior is made from reinforced stainless steel, designed for easy cleaning and long-lasting durability. Its ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, complete with a high-definition TFT-color display, allows for accurate adjustments of parameters such as temperature, fan speed, air flap position, and program time. In addition to its advanced functionality, the IF55 includes several safety features, such as an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meet protection class 1 standards according to DIN 12880. The forced air circulation system, powered by a quiet air turbine adjustable in 10% steps, includes the option for pre-heated fresh air admixture to further enhance control over the incubation environment. With a maximum chamber load of 176 lbs and each shelf supporting up to 44 lbs, the IF55 is built for reliability and precision, offering advanced AtmoCONTROL software for programming and data management via Ethernet or USB. INCLUDED: TheMemmert IF55 Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.