Heidolph Multi-Channel Pump Head C4

Leybold OERLIKON TURBOVAC WIDE RANGE Turbo Pump Type TW 690MS 800052V0001 This was removed from a un (more)iversity lab where it was surplus to requirements. It is in good cosmetic condition, we are unable to test it further at our facility. The fan blades move smoothly manually.

Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTAB 700. This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers up, when powered up the fault light illuminates immediately, due to this we have listed this item as Spares/Repairs. Fitted with Calpeda MXH 203E Pump.

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a univer (more)sity lab where it was surplus to requirements. PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up.

Edwards mXDS3s Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5  (more)m^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3s Dry Scroll Pump includes: - Inlet Isolation Valve - Exhaust Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station Final Pressure 1x10-8 hPa / 7.5x (more)10-9 Torr / 1 x 10-8 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 260 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution designed for all high vacuum applications. Featuring a user-friendly 7-inch touch display, it offers simple operation and remote control capabilities via a web server, allowing for versatile use across various demanding environments. With a final pressure of 1 x 10⁻⁸ mbar and a pumping speed of 260 l/s for nitrogen, this turbo pumping station ensures efficient and reliable vacuum generation. Equipped with the HiPace 300 turbopump and an MVP 030-3 backing pump, this unit provides robust performance with a quiet emission sound level of ≤50 dB(A). The air-cooled forced convection system maintains optimal operating conditions, and the unit is globally compatible with an input voltage range of 100-240 V AC. Weighing 22.5 kg, it is both sturdy and adaptable, making it suitable for a variety of applications in lab and industrial settings. INCLUDED: The Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Capacity: 5.5 l/min Final vacuum: 160 mbar Operating pressure: 2.4 bar Weight: 1.9kg

Odessy LI-COR Unit Model-9120 Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it requires software. Software not included.

IKA Matrix Delta Plus Thermoshaker Heating Temperature Max 110 °C Temperature Setting Range Min -1 (more)0 °C Temperature Stability 0.5 °C Features - Large and clear display with a convenient menu structure allows for an intuitive operation - Reduced waiting time through fast heating and cooling rates of up to 5.5 °C/min (heating) or 2 °C/min (cooling, at set-point temperature between ambient temperature and 30 °C below ambient temperature) - Firm quick-release fastener for quick and easy changing of the inserts/attachments as well as an automatic attachment detection - Automatic performance of heating and cooling tasks through programmable ramps - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness Matrix Delta plus heats and cools reliably with variableinserts. Whether blood samples, pharmaceutical agents, DNA/RNA samples or ELISAassays - reaction vials and plates with even the smallest volumes are reliablytempered in all laboratory applications. In addition, Matrix Delta plus comes with numerous user-friendly features:- Tempering of samples - Synthesis of cDNA - Enzyme-catalysed linking of RNA or DNA (ligation) - Gentle thawing of sample material - Structural change of DNA, RNA and proteins (denaturation) - ELISA assays Click Here to View Product Video INCLUDED: The IKA Matrix Delta Plus Thermoshaker includes: - MATRIX Delta Plus - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Delta Plus Thermoshaker Specifications Maximum load0.3 kgPermissible ON time100 %TimeryesTimer displayTFTTime setting min.1 sTime setting max.6000 minOperating modetimer, continuous and program operationWorking with microtiter platesyesWorking temperature min.room temp. -30 °CTemperature setting range min.-10 °CHeating temperature max. 110 °CHeat output 100 WHeat control TFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 ±°CHeating rate5.5 °C/minTemperature displayyesCooling Rate2 °C/minCooling Power72 Wembedded cooling unityesNumber of exchangable attachments10Fixed safety circuit145 °CDimensions (W x H x D)216 x 127 x 351 mmWeight9.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input230 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

A&D Weighing Apollo GX-124AN Analytical Balance, 120 g, 0.1 mg (NTEP Class I) Capacity 120 g Re (more)adability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-alert visually and audibly indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Internal Auto calibration or with easy one-touch button - performs and documents internal calibration - Password-Protect – offers password-protection up to 11 users and 1 administrator - GLP/GMP/GCP Compliance with full calibration reports - Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF | REZERO, CAL, MODE, SAMPLE, PRINT, TARE - Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility - Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional) - Stainless steel pan and dust-plate can be easily removed for cleaning - Die-cast aluminum housing provides extra stability and durability - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-124AN Analytical Balance, 120 g, 0.1 mg (NTEP Class I), delivers precision in regulated environments with its 120 g capacity and 0.0001 g readability. This balance is NTEP certified, ensuring compliance and accuracy for legal-for-trade applications. It enhances productivity with a fast stabilization time of approximately 1.5 seconds and supports stringent compliance needs, including USP41, with features that alert users when sample sizes fall below minimum requirements, effectively reducing waste and increasing efficiency. Designed to simplify routine checks and increase operational efficiency, the GX-124AN includes an Electronically Controlled Load (ECL) management system. This system performs repeatability testing and automatic precision checks internally without the need for external weights, thereby enhancing the reliability of measurements. The balance is equipped with six straightforward keys and offers a quick toggle switch between USB and RS-232C communication options, facilitating seamless integration into existing data management systems. For ease of use, the GX-124AN features an illuminated, front-mounted level that ensures quick and accurate leveling, even when operators are wearing gloves. It incorporates automatic self-calibration and one-touch internal/external calibration, guaranteeing valid results every time. The balance's robust construction and comprehensive measurement capabilities—including percent calculation and piece counting—make it ideal for a wide range of scientific applications. This analytical balance, with its precise measurement technology and legal-for-trade certification, stands as an excellent choice for professionals requiring dependable, high-performance tools in regulated settings. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-124AN Analytical Balance, 120 g, 0.1 mg (NTEP Class I) includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eppendorf Repeater E3x Electronic Pipette w/ Charging Stand Adjustable or Fixed Volume Adjustable Vo (more)lume Range 1 uL to 50,000 uL (Depending on Tip) Pipette Type Positive Displacement Features - Electronic positive displacement dispenser offering multiple functions such as dilution series, titration and automatic dispensing into microplates and vessel series - Automatic Combitips advanced pipette tip recognition eliminates time-consuming volume calculations and avoids incorrect dispensing volumes - Positive displacement ensures precise, accurate and contamination-free dispensing of viscous solutions such as glycerol, high vapor pressure liquids such as ethanol and hazardous samples - Motor-driven operation reduces human error and minimizes the risk of repetitive strain injuries (RSI) - Speed adjustment lets you program aspiration and dispensing speeds to achieve optimal throughput, precision and accuracy while preventing splashing - Ergonomic one-button tip ejector enables one-handed, contact-free removal of Combitips advanced pipette tips - Increase efficiency when filling plates or tube series by filling the tip once and dispensing up to 100 times without a refill - Versatile system offering a dispensing range from 1 uL to 50 mL with up to 5,000 dispensing volumes in increments as low as 100 nanoliters - Supports nine display languages including Chinese, Dutch, English, French, German, Italian, Japanese, Portuguese and Spanish - Eco-conscious production means that the Repeater E3/E3x and Combitips advanced tips are ACT-labeled to support sustainable choices The Eppendorf Repeater E3x Electronic Pipette w/ Charging Stand is a high-precision positive displacement pipette designed for efficient liquid handling tasks such as dilution series, titration, and automatic dispensing into microplates and vessel series. It features automatic Combitips advanced tip recognition that eliminates time-consuming volume calculations and ensures precise, contamination-free dispensing of viscous solutions like glycerol, high vapor pressure liquids such as ethanol, and other hazardous samples. Its robust construction and advanced technology make it an ideal tool for laboratories requiring consistent and reliable performance. The instrument is equipped with motor-driven operation that minimizes human error and reduces the risk of repetitive strain injuries, while adjustable aspiration and dispensing speeds optimize throughput and help prevent splashing. An ergonomic one-button tip ejector allows for easy one-handed tip removal, and the system lets you fill the tip once and dispense up to 100 times without a refill. With a versatile dispensing range from 1 uL to 50 mL in up to 5,000 dispensing increments and support for nine display languages, this eco-conscious pipette delivers a reliable and sustainable solution for modern laboratory workflows. INCLUDED: The Eppendorf Repeater E3x Electronic Pipette w/ Charging Stand includes: - Multi-Dispenser - Power Supply w/ Plug Adapters - Combitips Advanced Assortment Pack (1 tip of each size) - ViscoTip - Charging Stand - Operator's Manual - Manufacturer's Documentation - 6 Month Full Parts and Labor Warranty Eppendorf Repeater E3x Electronic Pipette w/ Charging Stand SpecificationsPipetting TypePositive DisplacementNumber of Channels1Volume Range1 uL to 50,000 uL (Depending on Tip)Volume Increments0.1 uL to 50 uL (Depending on Tip)OperationElectronicPipetting ModesPipetting, Dispensing, Automatic Dispensing, Sequential Dispensing, Multi-Asperate, Aspirate and Dispensing, TitrateAspiration & Dispensing Speeds8 LevelsDisplay LanguagesChinese, Dutch, English, French, German, Italian, Japanese, Portuguese, SpanishAutoclavableNoUV ResistanceYes (254 nm)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW