Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm

Technical features Flow rate (max.) 34 l / min Final vacuum (max.) 8 mbar (abs.) Pressure (max.) 1 b (more)ar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PTFE Applications Rotary evaporation Degassing Drying of the gel Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Chemically resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable Maintenance free ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

KNF Mini diaphragm vacuum pump LABOPORT N 86 KT.18 Model: N86KT.18 100% oil-free pumping, so media c (more)annot be contaminated when pumping and evacuating Maintenance-free, quiet running Flow rate: 5.5 l/min Weight [kg] : 1.9 Dimensions W x H x D [mm] : 90 x 141 x 164 Ultimate vacuum (max.): 403mbar (abs.) found following our proper functioning test (see photo) Year of manufacture: 2007 Signs of wear and peeling paint in places

Varmeca gear pump Varmeca 37M

VACUUBRAND MV 2 NT Diaphragm Pump Ultimate Vacuum 0.5 mbar Max. pumping speed at 60 Hz 1.4 cfm Num (more)ber of Heads/Stages 4/4 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Compact design - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Four-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases when the need is to reach fractional millibar ultimate vacuums. All parts in contact with pumped vapors or gases are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of non-corrosive applications. The new NT-series pumps provide whisper-quiet and ultra-low-vibration operation, high leak-tightness and improved vacuum. The highly flexible, fabric-reinforced double diaphragm made of FKM offers extended operating life. Four-stage diaphragm pumps are an excellent choice for continuous, contamination-free evacuation and pumping of non-aggressive gases under the very high vacuum demands of applications in physics and analytics. Due to the outstanding ultimate vacuum, these pumps are often used as alternative to rotary vane pumps. A typical application is the use as backing pump for turbomolecular drag pumps.INCLUDED: The VACUUBRAND MV 2 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 1 Diaphragm Pump Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping Speed 0.82 CFM a (more)t 60Hz Number of Heads/Stages 4/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Excellent ultimate vacuum - Whisper quiet and ultra-low vibration - Proven long diaphragm life, maintenance-free drive system The MD 1 diaphragm pump is an excellent choice for oil-free evacuation and pumping of non-corrosive gases down to 1.5 mbar ultimate vacuum. The three-stage design with precisely guided flat diaphragms provides outstanding pumping speed even close to the ultimate vacuum, especially when compared with similarly rated two-stage diaphragm pumps. The MD 1 is an ultra-low vibration pump with very long diaphragm lilfetime and stable ultimate vacuum documented with years of testing. With a flow path consisting of aluminum and selected plastics (diaphragms and valves made of PTFE/FKM and FKM, respectively) the pumps are suitable for a wide range of applications with non-corrosive gases. The MD 1 is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases. It is suitable for high vacuum requirements at modest gas flow as often needed in physics and analytics. The pump is exceptionally quiet and reliable with long diaphragm and valve lifetimes. With its low ultimate vacuum and compact dimensions the MD 1 is widely used as replacement of rotary vane pumps. Typical applications are exhaust gas analysis, for degassing of small amounts of viscous media and in particular as backing pump for compact turbomolecular drag pumps. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. For equipment manufacturers customized versions are available.INCLUDED: The VACUUBRAND MD 1 Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Made of fabric, protects device housing against dust, dirt, etc.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Labconco CentriVap DNA RotorForuse with Labconco CentriVap Systems INCLUDED: The Labconco 7462900  (more)CentriVap DNA Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 1 x 250ml Flat/175-225ml Conical Adapters, Cat. # 5804787005 The Eppendorf 1 x 250ml Flat/ (more)175-225ml Conical Adapters, Cat. # 5804787005 are for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 1 x 250ml flat bottom bottle or 1 x 175-225ml conical bottle each with the maximum tube dimensions (Diameter x Height) of 62mm x 130mm. This is a two piece set, and the adapters are new in packaging. (Please note that conical bottles need to be used together with a conical form insert provided by the manufacturer who provided the bottles.) INCLUDED: The Eppendorf 1 x 250ml Flat/175-225ml Conical Adapters, Cat. # 5804787005 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 1 x 250ml Flat/175-225ml Conical Adapters, Cat. # 5804787005 SpecificationsBottom ShapeFlatRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor