Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, Standard Flow Head (R4)

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical-resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate, separator on (more) the suction side and high-performance condenser on the pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Heidolph Hei-VAC Diaphragm Vacuum PumpAll components that come in contact with media are made from c (more)hemically resistant fluoropolymer. The durable PTFE design guarantees a superior diaphragm lifespan. Head cover and clamping disc have a stable core made from metal that offers unsurpassed long-term performance. The direct pump drive (without belt) has no wear parts, is exceptionally quiet and creates a very low vibration environment. The physically optimized gas ballast valve prevents from condensate collecting in the pump. Condenser is not in scope of delivery. INCLUDED: The Heidolph Hei-VAC Diaphragm Vacuum Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Shimadzu SPD-M10A Diode Array Detector (DAD). Light Source: D2 lamp, W lamp, or both (3 modes). Wave (more)length Range: 190 – 800 nm. Wavelength Accuracy: 1 nm. Noise Level: 0.8 x 10-5 AU (250 nm, 600 nm). Drift: < 1 x 10-3 AU/hr (250 nm, 600 nm). User manual.

Reconditioned Elcold chest freezer at -40 ºC. Internal dimensions 650x450x520 / 320 mm (H x D x W).

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Ohaus EX6201N Explorer Precision Balance Introducing the OHAUS Explorer® Series EX6201N Precision Ba (more)lance - a paradigm of intelligence, intuition, and ingeniously practical design. Expanding on its contemporary features, the Explorer series offers exceptional functionality, setting new standards in the high-performance balance market.Intelligent Performance: The EX6201N features optimized linearity and repeatability specifications, and state-of-the-art vibration filtering for enhanced balance stability. Its intelligent calibration system, AutoCal, performs daily automatic calibration, ensuring consistent, reliable accuracy. This calibration system self-adjusts based on detected temperature changes or at intervals between 3-11 hours, based on user configuration. A traditional external calibration option is also available. Coupled with a 3x3 filtering setup for fast, stable weighing results, these features ensure precision, efficiency, and improved throughput.The EX6201N also offers superior shock, spill, and splash resistance, protecting the balance from disruptions and accidental damages, thereby increasing the longevity of the device. The 2-D Protection guards the balance against sudden movements and the IP54 base enclosure shields the weighing base from debris and accidental spills.Intuitive Operation: A large, color, touch-screen display and icon-driven application software featuring 14 unique application modes make the EX6201N the most user-friendly, advanced balance in its class. The display can be adjusted at three different angles for optimal viewing.Ingenious Design: The EX6201N sports a modular design, separating the base from the display for maximum workspace flexibility. The draftshield models isolate the weighing chamber, enhancing stability and speed, while providing easy accessibility through top-mounted side doors or a versatile top door that flips or slides open.Practical Features: This model features up to four user-programmable touchless sensors to minimize cross-contamination and reduce wear and tear. The EX6201N meets or exceeds the Class I or II accuracy requirements in accordance with NIST Handbook 44 and Canada's Weights and Measures Regulations.Specifications: - Internal Calibration: Autocal - Automatic - Capacity: 6,200g - Certified Readability: 0.1g - Pan Size: 7.48" x 7.87" (192mm x 200mm) - Display Size: 5.7" / 145mm (diagonal) To simplify complex laboratory measurements and eliminate the need for manual calculations and data logging, choose the OHAUS Explorer® Series EX6201N Precision Balance. Its high-resolution display and innovative user interface make balance setup and application use effortless. Optimize your accuracy, productivity, and efficiency with the ingeniously practical design of the OHAUS EX6201N.INCLUDED: The Ohaus EX6201N Explorer Precision Balance includes: - Power Cord - One Year Manufacturer's Warranty