Gallenkamp Digital Flame Analyser FGA-350-L w/ Lafert Air Compressor Pump Lab

Laboport SD N 860.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automat (more)ic condensate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 60 l / min Final vacuum (max.) 4 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Technical features Flow rate (max.) 16 l / min Ultimate vacuum (max.) 20 mbar (abs.) Operating press (more)ure (max.) 0.5 bar (rel.) Permitted fluid temperature 5-40°C FFPM valve material Membrane material PTFE coating PPS pump head material Applications Filtration Degassing Drying Aspiration of fluids Solid phase extraction Qualitative characteristics Clean operation, 100% oil free Corrosion resistant Compact, silent and reliable Small footprint Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C,  (more)5200W, 230V 60HzDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5200W, 230V 60Hz SpecificationsKey SpecificationsDescription1.5 HP Chiller, Positive Displacement; Air-CooledDisplayLEDConnectivityOptional: RS232, RS485Working Temperature Range °C5° to 35°Temperature Stability °C±0.5°Temperature Calibration Capability1-pointPump TypePositive Displacement 60 Hz OnlyPart Number6860P46A270DMaximum Pressure (psi)100.0Maximum Pressure (bar)6.90Maximum Pressure Flow Rate (gpm)3.50Maximum Pressure Flow Rate (l/min)13.2Cooling Capacity @ +10°C (W)4420Cooling Capacity @ +20°C (W)5200Cooling Capacity @ +30°C (W)5980Heater Wattage1000Electrical Requirements (VAC/Hz/Ph/A)230/60/1/21.1Regulatory ApprovalsTUVDownloadsTechnical Specification Download Operator's Manual Download

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

ABB Extrel Mass Spectrometer w/ Pumps, Chiller & Various Parts This was removed from a universit (more)y lab where it was surplus to requirements. All units have been powered up unless specified. It is in reasonably good cosmetic condition with minor marks. Molecular Beam System: TPU 240 Pfeiffer Balzers PM P01 620 Turbomolecular PumpModel: TPU 240Serial#: 12087358 Item is in good cosmetic condition.Unable to test. Edwards Active Pirani GaugeModel: APG-M-NW16Serial#: 006737606Untested Pfeiffer Vacuum TMH 520Model: TMH 520 ISSerial#: 12392520Untested Edwards E2M 28 Vacuum PumpModel: E2M 28Serial#: 10020344kg Mass Spectrometry Stack on frame consists of: Extrel Core Mass SpectrometersModel: Merlin QMS ControllerSerial#: 28934 ABB Extrel Quadrupole Mass SpectrometryModel: 150-QC Quadrouple Power SupplySerial#: 24512 ABB Extrel Quadrupole Mass SpectrometryModel: QMS DC Power SupplySerial#: 23678 Edwards Active Gauge ControllerModel: Active Gauge ControllerSerial#: D38655000 Extrel Quadruple Mass Spectrometry FanModel: N/ASerial#: 24561Untested. Pfeiffer Vacuum TCP 380 X 2Model: TCP 380Serial#: 7019428 MKS Baratron Power Supply and DPMModel: N/ASerial#: N/A Additional Parts: Edwards 18 E1M18 Rotary Vane Vacuum PumpModel: E1M18Serial#: 00672735835kg Edwards 2 E2M2 Rotary Vane Vacuum PumpModel: E2M2Serial#: 0503530kg Particle Measuring System Inc Condensation Particle CounterModel: 761003Serial#: 816Date: Feb 1996 Pfeiffer Vacuum TCP 380Model: TCP 380Serial#: 7019428 Pfeiffer Blazers TCP 120Model: TCP 120 ASerial#: S4758 Horiba Triax Series 180 triple grating spectrometerModel: Triax 180Serial#: 0109-02-97 EMS Microtron 200 Microwave Power Generator Mark 3Model: Microtron 200Serial#: 111272 Julaba FE500 Compact recirculating coolerModel: FE500 GBSerial#: 9610050 4

Small sample volume from 50ml -120ml. Continuously variable single shaft pump and stirrer with digit (more)al readout. Manual fill, drain and cleaning. Chemically compatible as standard. Particle size:Up to 600µm – sample dependent Stirrer speed: 350 – 3,500rpm Dimentions: 140mm x 175mm x 390mm Weight: 6.75kg 100-240V / 50-60Hz / 20W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Vankel VK7010 Dissolution System VK750D Heater/Circulator was removed from a university lab whe (more)re it was surplus to requirements. The system powers up and is in good working order. It was tested with a digital thermometer (not included). We are unable to test it further at our facility. It is in good cosmetic condition, with minor marks from previous use. The lab confirmed the unit was in good working order prior to removal. Printer paper not included. Includes 2 x Cable cables and 1 x Data cables.

Polyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V Flow Rate 15L/min  (more)(4 gpm) Temperature Range -10C to 30C Cooling Capacity 450W at 20C Features - Intuitive touchscreen display with 5 operating languages (Chinese, English, French, German, Spanish) - Full text messages and audible alarms - Continuous fluid level monitoring to prevent premature pump failure - Variable Fan Speed Technology for quieter operation - UV Light Biological Growth Inhibitor - Patented Self-diagnostic system - Low flow shutoff and alarm, high and low temperature alarms - Displayable temperature units in °C or °F The Polyscience BA06A1G3-110A1NC DuraChill Benchtop Chiller offers advanced cooling technology with a temperature range of -20C to 30C and a cooling capacity that varies from 150W at -20C to 900W at 20C. It features a microprocessor-based temperature controller with a high-resolution TFT LCD display, enabling temperature readouts in °C or °F and pressure display with an accuracy of ± 35% of full scale. The user-friendly interface includes a touch screen display, a multi-language interface, and touch keypad for precise temperature set-point adjustments. The chiller utilizes a Cool Command modulated refrigeration system to enhance temperature stability and extend compressor life, while the WhisperCool Environmental Control System optimizes noise reduction and energy efficiency. It comes equipped with a centrifugal (magnetic drive) pump capable of delivering a flow rate of 15L/min at 0 psi, with pressure up to 18 psi. Additional features include continuous level sensing in the standard reservoir (1.5L capacity) for pump protection, and an optional UV Anti-Growth Light to prevent biological growth in the process fluid. This makes the DuraChill Chiller a robust and efficient solution for demanding applications where tap water cooling systems fall short. Click Here to View Product Video INCLUDED: The PPolyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V includes: - 1 Pair of 1/2" NPT x 3/8" Barbed Fittings - 1 Pair of 1/2" NPT x 1/2" Barbed Fittings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty