Heidolph Reax 20/12 Overhead Shaker

Speed range: 150 – 1,350 rpm Speed control: analogue Timer: up to 120 minutes, continuous Maximum pe (more)rmissible load: 2 kg Movement: circular Orbit: 1.5 mm Dimensions (WxHxD): 245 x 125 x 310 mm Weight: 5.5 kg

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks.

Ohaus SHHD1619AL Heavy Duty ShakerThe OhausSHHD1619AL 16 kg Capacity Analog Heavy Duty Orbital Shake (more)r is designed for awide range of applications that require basic shaking control. Shaker providesreproducible motion that is evenly distributed throughout the entire surface ofthe tray. With loadcapacities from 35 lbs and over 70 accessory options and with microprocessorcontrol to provide variable speed and consistent shaking, while ramping to theset speed. Microprocessor displays the last set-point and will restart if poweris interrupted. Built-in tray and non-slip rubber mat included with theSHHD1619AL. Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases the speed to desired setpoint to avoid splashing. Theload sensor detects unbalanced conditions and automatically reduces rpm to asafe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD1619AL Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus SHHD1619AL Heavy Duty Shaker Specifications Speed Range25 to 500 rpmTimer1 minute to 120 minutesOrbit19 mm (0.75")Maximum Weight Capacity35 lbs (16 kg)Tray MaterialAluminumTray Dimensions (L × W)11 × 13" (27.9 × 33 cm)Overall Dimensions (L × W × H)16.3 × 14.0 × 5.9" (41.3 × 35.5 × 14.9 cm)Ship Weight49 lbs (22.2 kg)ControlAnalogPower120V, 5A, 50/60 HzPower Consumption75 WSafety CertificationTUVWorking Environment32° F - 104° F, 80%RH, non-condensing (0° C - 40° C, 80%RH, non-condensing)CalibrationSpeed calibrationDrive SystemBrushless DC Motor;Triple EccentricSpeed Accuracy±1 rpm, Above 100 rpm ±1% of set speedComparison of ModelsSpecificationOhaus SHHD1619ALOhaus SHHD1619DGOhaus SHHD2325ALOhaus SHHD2325DGOhaus SHHD4525DGOhaus SHHD4550DGOhaus SHHD6825DGOhaus SHHD6850DGSpeed Range (rpm)25 to 50015 to 50025 to 50025 to 50015 to 50015 to 30015 to 50015 to 300Timer (Minutes)1 to 1201 to 160 hours1 to 1201 to 1201 to 160 hours1 to 160 hours1 to 160 hours1 to 160 hoursOrbit (mm)19 (0.75")19 (0.75")25 (1")25 (1")25 (1")51 (2")25 (1")51 (2")Maximum Weight Capacity (lbs/kg)35 lbs (16 kg)35 lbs (16 kg)50 lbs (22.7 kg)50 lbs (22.7 kg)100 lbs (45.4 kg)100 lbs (45.4 kg)150 lbs (68 kg)150 lbs (68 kg)Tray Dimensions (L x W)11 x 13"11 x 13"18 x 24"18 x 24"24 x 24"24 x 24"24 x 36"24 x 36"ControlAnalogDigitalAnalogDigitalDigitalDigitalDigitalDigitalPower120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 HzPower Consumption (W)7575757580808080.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Ohaus SHEX1619DG Extreme ShakerThe OhausSHEX1619DG Extreme Environment Orbital Shaker is designed fo (more)r a wide range ofapplications including cell cultures that require CO2 and humidity for optimalcell growth. The microprocessor control provides consistent uniform shakingwhile safely ramping to the set speed. Ideal forapplications that require CO2 and humidity for optimal cell growth, our ExtremeEnvironment Shakers are designed for use in extreme environments such as CO2incubators. A remote controller (that magnetically attaches to the outside ofmost incubators) allows for external control of settings, and the shaker baseis placed inside of the incubator. Microprocessor control ensures consistentshaking while safely ramping to the set speed. The exclusiveAccu-Drive shaking system utilizes dual-speed sensors to continuously monitorand maintain shaking speed - delivering exceptional speed control, accuracy anddurability. The externalcontrol module of the SHEX1619DG allows for settings to be easily viewed orchanged from outside of the incubator. The remote controller magnetically attachesto most incubators or can sit on a lab bench. Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zeroClick Here to View Product Video INCLUDED: The Ohaus SHEX1619DG Extreme Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus SHEX1619DG Extreme Shaker Specifications Speed Range15 to 500 rpmSpeed Accuracyabove 100 rpm ± 1% of set speed; below 100 rpm ± 1 rpmTimer1 second to 160 hoursOrbit0.75" (19 mm)Maximum Weight Capacity35 lbs (16 kg)Tray MaterialAluminumTray Dimensions (L x W)11 x 13" (27.9 x 33 cm)Overall Dimensions (L x W x H)Shaker: 11.6 x 14.0 x 5.9" (29.4 x 35.5 x 14.9 cm)Remote: 5.5 x 14.0 x 4.4" (15.0 x 35.6 x 11.2 cm)Ship Weight49 lbs (22.2 kg)ControlDigitalPower120V, 0.5A, 50/60 HzPower Consumption30 WSafety CertificationTUVCalibrationSpeed calibrationDrive SystemBrushless DC Motor;Triple EccentricTray ConstructionAluminum

Ohaus Endeavor 5000 Series e-E51LDMP03 AM Light Duty Microplate Shaker Speed Range 100 to 1,200 RPM  (more)Maximum Capacity 4 Microplates or 2 Microtube Racks Orbit 3 mm Features - Compatible for use in incubators and cold rooms, enhancing versatility across experimental conditions - Features a triple eccentric drive and maintenance-free brushless DC motor for stable, long-term shaking - Bright, backlit LCD display with easy-to-navigate menu for speed, time settings, and advanced features - Integrated safety mechanisms with overload and unbalanced detection to protect samples - Equipped with RS232 interface for two-way communication, enabling data logging and unit control - Durable construction with chemical-resistant polymer housing and sturdy aluminum tray - Small footprint design with visual and audio alarms, and advanced microprocessor control for gradual speed increase to avoid splashing Click Here to View Product Video The Ohaus Endeavor 5000 Series Light Duty Orbital Shakers are a trusted choice for everyday laboratory shaking needs, designed to accommodate a wide range of applications from microbiology and molecular biology to food science and chemistry. These shakers come in three models, featuring either a 3 mm orbit, a 20 mm orbit, or a specialized microplate configuration, ensuring versatility for various research requirements. Each model is compatible with use in incubators and cold rooms, highlighting their adaptability to different experimental conditions. The shakers boast a durable, chemical-resistant polymer housing and a sturdy aluminum tray with multiple attachment points for accessories, making them both robust and easy to clean. A key feature of the Endeavor series is its triple eccentric drive and maintenance-free brushless DC motor, providing stable and accurate shaking over long periods. Safety is enhanced with integrated overload and unbalanced detection systems to protect valuable samples. The series is equipped with a bright, backlit LCD display that shows speed and time settings, including a timer with both count-up and count-down functions that automatically shuts off shaking when time expires. An easy-to-navigate menu and simple knob control facilitate operation, while the inclusion of a tray with a non-slip rubber mat, flask clamps, and tube racks enhances its utility. An RS232 interface allows for two-way communication for comprehensive data logging and control, ensuring these shakers meet the demands of modern laboratories. Additionally, design features such as visual and audio alarms, a small footprint to conserve bench space, and advanced microprocessor control for gradual speed ramping further underscore the thoughtful engineering behind the Ohaus Endeavor 5000 Series. Optional accessories like a universal platform and over 20 flask clamps and tube racks are available, making these shakers a versatile and essential tool for a variety of scientific studies. INCLUDED: The Ohaus Endeavor 5000 Series e-E51LDMP03 AM Light Duty Microplate Shaker includes: - 11 x 7.75 in. Microplate Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: Ambient to 320°C Speed range: 100 – 2000 rpm Max. stirring capacity H₂O: 10 L Pla (more)te dimensions: Ø 125 mm Plate material: Stainless steel Dimensions (WxDxH): 168 x 220 x 105 mm Weight: 2,4 kg

Density ρ: 7950 (± 140) kg/m3 Box: Plastic box (included) Material: Stainless Steel Content (set up) (more): 5000 g F2 / 200 g F2 OIML Class: F2 Nominal Value: 5000g/200g

Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head This was removed from a lab (more)oratory where it was surplus to requirements. The unit powers up but is missing its control interface, but it is operable. Included are; KrosFlo Research II Pump:Model No. 900-1612 MasterFlex Pump Head:Model No 900-1613 Tubing Sizes:L/S 13, 14, 16, 25, 17, 18 Accessories: 1x RS232 to Male DIN Cable: 2x Pairs of GripsMaterial: Plastic 2x ArmsMaterial: Metal The units are bolted to a metal plate attached underneath the unit. They are in good cosmetic condition and can be easily removed if necessary. 1x Misc GripMaterial: Aluminium The unit is in good cosmetic condition. 2x Arm Grips:Material Plastic The units are in good cosmetic condition. They hold position well against the metal upright arms. 

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Scilogex 0.2mL 0.5mL and 1.5/2mL Block The Scilogex Block has the capacity to accommodate 0.2, 0.5,  (more)and1.5/2.0mLtubes. 18 holes each have a diameter ranging in sizes from 6, 7, and 10mm and overall dimensions are 15 x 9.5 x 5cm. INCLUDED: The Scilogex 0.2mL 0.5mL and 1.5/2mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty