Edwards XDS35i Dry Scroll Pump

Technical features Flow rate 0.5–3.0 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

VACUUBRAND MD 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 1.5 mbar Max. pumping speed at 60 Hz  (more)2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance. Three-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with high vacuum requirements. Typical applications are parallel and rotary evaporators, concentrators, drying ovens and many other laboratory applications. The MD 4C NT has an outstanding performance for pumping large amounts of vapor, e.g., out of drying ovens and gel dryers. This powerful pump is at the heart of a complete family of well-proven and reliable vacuum systems and pumping units for larger lab applications.INCLUDED: The VACUUBRAND MD 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience 6860T56A270D Durachill Chiller with Turbine Pump, Air-Cooled, 5° - 35°C, 5200W, 230V 60H (more)zDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860T56A270D Durachill Chiller with Turbine Pump, Air-Cooled, 5° - 35°C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN840.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 34L/min  (more)(2.04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free - Self-drying system removes condensate without affecting the vacuum level The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables.

KNF IP65 UFEM 1.10 TT.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. The KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump is brand new in box . Includes a 1 Year Full Parts and Labor Warranty. KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump SpecificationsWeight2 lbs., 0.9kgConnection Tubing ID1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°CPermissible Liquid Media Temp Range5 - 80°CPump HeadPVDFDiaphragmPTFE coveredValvesFFKMDimensions (L x W x H)5.9 x 5.7 x 3.7in (150 x 144 x 93mm)Maximum Suction9.8 ft of waterMaximum Pressure85 psig, 6 barPower Consumption24WLiquid Flow Rate1-100 ml/minLiquid Dosing Volume1-999 mlFunctionsManual Operation (S Version)Electrical100 – 240VComparison of ModelsSpecificationKNF IP65 UFEM 1.10 FT.18RCP2KNF IP65 UFEM 1.10 FT.18S2KNF IP65 UFEM 1.10 KT.18RCP2KNF IP65 UFEM 1.10 KT.18S2KNF IP65 UFEM 1.10 ST.18RCP2KNF IP65 UFEM 1.10 ST.18S2KNF IP65 UFEM 1.10 TT.18RCP2KNF IP65 UFEM 1.10 TT.18S2Connection Tubing¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4 mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°CPermissible Liquid Media Temp Range5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°CPump HeadPTFEPTFEPPPTFEStainless SteelStainless SteelPVDFPVDFValvesFFKMFFKMFFKMFFKMFFKMFFKMFFKMFFKMLiquid Flow Rate1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/minLiquid Dosing Volume1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 mlFunctionsN/AN/AN/AManual Operation (S Version)N/AManual Operation (S Version)N/AManual Operation (S Version).comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Max. vacuum: 99 mbar abs. Max. flow rate: 34 L/min Noise level: 52 dB Hose barb: ID8 Vacuum regulato (more)r: Yes Filter cartridge: Yes Overflow protection: Yes Thermal protection: Yes Dimension (LxWxH): 310 x 140 x 200 mm Weight: 5.2 kg

Set of 2 clips for 250 ml Erlenmeyer For universal platform/stirrer Gross weight: 0.132 kg Gross dim (more)ensions: 15 x 13 x 8 cm

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs - Designed to securely hold up to 4 microplates or deep well plates or 2 microtube racks. The unit gradually increases the speed to the desired setpoint, to avoid splashing. Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes/bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates

F2 Mass Standard - slotted weights. Nominal value - 500 g.

Branson CPX5800 Digital Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and c (more)reates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer with continuous ultrasonic operation. - Last stored parameters are recalled when unit is turned back on. - Controls are located above and behind the cleaning tank in an easily accessible control tower panel, and raised above the tank to avoid damage from cleaning solutions. - Convenient built-in pour drains are featured on .5- and .75-gallon models. Tank drains with valves are incorporated on models 1.5-gallon and larger. - Plastic body, chemical-resistant. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and ultrasonic duration. Bransonic baths completely remove flux and contaminants from such precision parts as PC boards, SMDs, quartz crystals, capacitors, and many others. Branson ultrasonic cleaners can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids. Bransonic CPX ultrasonic baths feature digital controls with power tracking capabilities to adjust for light or heavy loads, high/low power control, degassing and sleep mode. The CPX baths offer the following features:Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. The CPX degassing period can be set up to 99 minutes. Extended degas time periods allow for “beyond cleaning” applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. When cleaning delicate parts, the CPX allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. Click Here to View Product Video INCLUDED: The Branson CPX5800 Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

This revolutionary training arm provides complete venous access for IV therapy and phlebotomy, plus  (more)sites for intramuscular and intradermal injections. An extensive 8-line vascular system allows students to practice venipuncture at all primary and secondary locations, including starting IVs and introducing Over the Needle IV Catheters. The venous system simplifies setup with only one external fluid bag supplying artificial blood to all veins simultaneously. The dorsal surface of the hand includes injectable metacarpal, digital, and thumb veins. The antecubital fossa includes the median cephalic, median basilic, and median cubital veins. Venipuncture can also be performed along the basilic, cephalic, accessory cephalic, and median antebrachial veins. Intramuscular injections may be performed in the deltoid muscle and intradermal injection sites are located in the upper arm. Intramuscular injections into the deltoid muscle are enhanced by the soft, lifelike skin and by the natural bony landmarks in the region. Intradermal injections using distilled water will create characteristic skin welts at designated sites on the upper arm. The realism of the Life/form® Advanced Venipuncture and Injection Arm is truly amazing. The soft, flexible fingers are molded separately with extreme attention paid to every detail – right down to the fingerprints! Flexion of the wrist helps students develop manipulation skills. The replaceable skin rolls as the veins are palpated, and a discernible pop is felt when entering the veins. The Life/form® molding process reproduces the fine details of the skin to make the arm look and feel alive. Valves in the veins can be seen and palpated on the skin surface. Simulated veins and skin are completely replaceable to keep this training arm looking and working like new. Under normal use, hundreds of injections may be performed before the veins or skin need to be replaced. Complete replacement kits are available and easy to use. To extend the life of the veins, an aerosol sealant is available to seal punctures and prevent leakage.Includes 2 uarts of simulated blood, 3 cc syringe, 12 cc syringe, needle, two fluid bags, instruction manual, and soft carry case.