Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Brand
Edwards
Location
Hampton - United States
Price
$396.00 
(ex. VAT)
This item is
for sale
State of item
new
Categories

Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps

$396.00 (ex VAT)
item image

Description from the supplier

  • Compact design combines both filtration efficiency and noise reduction
  • Integrated inlet diffuser optimizes sound attenuation
  • Multi-stage noise reducing features including final stage sound absorbent insert
  • Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop
  • Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element
  • Seamless drawn housings - no welds to rust or vibrate apart
  • Durable carbon steel construction with black powder coated finish
  • Ability to mount vertically or horizontally

The Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps has two main functions: to reduce exhaust noise during pump down and gas ballast operation as well as to collect and retain tip seal dust as the pump is operated. Exhaust gases exit the exhaust port when the pump is being used to evacuate a process chamber, or when the gas ballast control is being used, or both. The noise level when pumping down rises as the throughput increases and the silencer is used to reduce this noise level. The outer can is made of pressed steel and is split to allow access to the filter elements. The filter element housing is made from Santoprene thermoplastic elastomer. The element itself is polyester. The foam block is manufactured from filter foam.

  • NW25 Clamp
  • Centring Ring
  • Manufacturer's Documentation
  • 1 Year Manufacturer's Warranty

Product details

Rated Flow11 m^3h^-1
Maximum Back Pressure0.2 bar gauge
Tip Seal DustPump performance and silencer performance unaffected providing elements serviced in accordance with recommendations
Flange SizeNW25
Dimensions (H x W)9.4 x 8.1 cm
For Use WithnXDS and XDS5/10 Dry Scroll Pumps
About QuestPair

QuestPair is a platform to find and acquire laboratory equipment by connecting research organisations, universities, and companies with high-quality, affordable instruments. The platform facilitates multiple sales daily worldwide and works with partners around the globe to provide trusted, vetted products for a wide variety of scientific needs. Our in-house developed AI algorithms collect data on the usage and availability of scientific instruments, enabling us to provide tailor-made assistance in sourcing suitable laboratory equipment. With a focus on cost-effectiveness and sustainability, QuestPair has an excellent track record in streamlining acquisitions for laboratories to further scientific research and development.

Related items:
Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF)-cover
Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF)

Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF)Features - Utilizes pos (more)itive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

$4,188.00 ex VAT
United States
pumps liquid & other
Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump-cover
Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump

Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Con (more)nection NW40 Pumping Speed Nominal 0.047 m³/s Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.With nEXT85 and nEXT55 Edwards offers a small and compact turbomolecular pump platform ideal for Analytical Instruments as well as for the R&D market.Features and BenefitsUpper magnetic bearing - ensures clean vacuum, low power and low vibration. Optimised rotor designs - deliver high speeds and high compression. Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. Inlet screen - supplied as standardINCLUDED: The Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump includes: - Power Cord - One Year Manufacturer's Warranty

$6,888.00 ex VAT
United States
pumps liquid & other, vacuum pumps
People are watching right now:
Olympus Fluoview FV1000 System - Incomplete System - No Microscope Lab-cover
Olympus Fluoview FV1000 System - Incomplete System - No Microscope Lab

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

£3,785.00 ex VAT
United Kingdom
microscopes
Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System-cover
Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System

This Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System was removed from a u (more)niversity lab where it was surplus to requirements. All parts are in good used cosmetic condition but they do have signs of general use. We have powered it all up and the system appears to function as it should. We were able to view a slide via the software on the PC. It is an excellent system and is in full working order. It has been professionally serviced. The comments from the service engineer are below. It appears to be in good working condition but we have no way of checking the laser. The internal halogen works fine and so does the external metal halide illumination. Objectives UPlanFl 4x/0.13 ∞/- UPlanFl 10x/0.30 ∞/- LCPlanFl 20x/0.4 ∞/- LCPlanFl 40x/0.60 ∞/- Diagnostic Inst 1x C Mount adaptor. Some evidence of bleaching of fluorescence filters. The system consists of: 1 x Olympus IX50 Microscope Modified by Arcturus.With PixCell IIE LCM2016 Laser System (Manufactured September 2002).The microscope is fitted with:2 x Olympus WH10X/22 Eyepieces. Olympus Objectives: 1 x OlympusLCPlanFl40x/0.60∞/ 1x OlympusLCPlanFl20x/0.40∞/ 1 x OlympusUPlanFl10x/0.30∞/ 1x OlympusUPlanFl4x/0.13∞/- 1 x ZEISSPlan-NEOFLUAR40x/0.75∞/0.17(not fitted in the microscope). 1 x Dell Dimension 3000 PC with keyboard, mouse & monitor.The PC has Arcturus ARC200 software installed and is fitted with a PCi card interface for the Hitachi camera. 1 x Olympus BH2-RFL-T3 Lamp PSU.It is showing 71.2 lamp hours. 1 x Olympus U-ULS100HG 100w lamp 1 x Hitachi KP-D590P CCD Color Camera. 1 x Camera Remote Unit. 1 x Arcturus PixCell IIe Control Unit. 1 x MARX Crypto-Box. 1 x Arcturus 12109-00D Sample holder. Various cables to connect the whole system. Manuals.

£4,485.00 ex VAT
United Kingdom
microscopes
Radwag HX5.EX-1.15.H4 One Load Cell Platform Scale-cover
Radwag HX5.EX-1.15.H4 One Load Cell Platform Scale

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

€3,876.00 ex VAT
Poland
platform scales, scales for ex areas
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]