Edwards nXDS6iR Dry Scroll Pump

Savant VP100 Two Stage Rotary Vane Vacuum Pump with Franklin 1/2 HP Motor This item was removed from (more) a university laboratory where it was surplus to requirements. It powers on and is in fair cosmetic condition. The pump is successfully drawing and expelling air. Model: VP100Serial No.: 36613

ACCELA pump and autosampler for HPLC THERMO SCIENTIFIC ACCELA pump that does not start ACCELA autosa (more)mpler not tested To be considered for parts

Thermo Scientific HPLC System -600 Pump, Autosampler,PDA Detector and MSQ Plus This system was remo (more)ved from a university lab where it was surplus to requirements. The units are all in good cosmetic condition with marks from use. Everything powers up, but we are unable to test them further at our facility. This system consists of; 1 x Thermo Scientific Accela 600 Pump.1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific Accela Tray.1 x Thermo Scientific Accela MSQ Plus.

VACUUBRAND MZ 2 NT Diaphragm Pump Ultimate Vacuum 7 mbar / 5.2 torr Maximum Pumping Speed 1.4 cfm at (more) 60Hz Number of Heads/Stages 2/2 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Xxceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics and allow a wide range of applications for non corrosive gases. The two-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 7 mbar. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. The new NT-series features further improved performance data. Two-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping at medium vacuum requirements. In contrast to water jet pumps they do not consume water and therefore do not produce any contaminated waste water. Typical applications are vacuum ovens and aqueous filtrations. INCLUDED: The VACUUBRAND MV 2 VARIO Select Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nXR90i NW40 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW40 Displacement 90 m 3h-1 Features - Achieves an ultimate vacuum of 0.03 mbar (0.022 Torr), ideal for precision tasks - Supports a maximum outlet pressure of 0.2 bar gauge for enhanced application flexibility - Operates at a continuous inlet pressure of 1013 mbar, accommodating various systems - Maintains a leak tightness of < 1x10⁻⁶ mbar l/s for reliable operation - Designed to fit under benchtops, optimizing laboratory space - Ensures a clean, oil-free operation, reducing contamination risks - Keeps the vacuum chamber free from dust, maintaining a clean environment - Seamlessly integrates into existing vacuum systems for OEMs - Provides reliable vacuum performance over long periods, ensuring operational stability - Low maintenance reduces downtime ensuring research continuity Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR90i NW40 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Heidolph Hei-FLOW Ultimate 600 Peristaltic Pump The ability to switch between precise dosing and fas (more)t conveying make this pump model the perfect complement to a reactor system. With a flow rate of 2.0 - 4,056 ml / min, when operated with single-channel pump heads, flows from feed-batch and chemostat modes of operation can be conveyed precisely. Rapid filling and emptying of the reactor system is also possible. In addition to the selectable process parameters - speed, tubing diameter, flow quantity display, dosing volume, interval dosing and break times - the pump conveying characteristics are stored in the program. Thanks to the analogue and digital (RS 232) interfaces, processes can be automated. All media is conveyed with a control accuracy of ±2% at a speed of 24 — 600 rpm. An optional foot switch can be connected for dosing by foot pressure. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Ultimate 600 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

This listing is for a Thermo Fisher Scientific Evolution 350 UV-VIS Visible Photospectrometer. The  (more)unit is in full working condition and is ready for immediate release. For routine, complex research and advanced applications, including current compliance, the Thermo Scientific Evolution Pro UV-Vis Spectrophotometer series brings together reliable, versatile hardware, a broad range of accessories, with easy-to-use, easy-to-learn Thermo Scientific Insight Pro Software. Easily go from sample to final report - with intuitive INSIGHT Pro Software guiding you every step of the way. Obtain results you need for quantitative analysis, scanning and kinetics applications with comprehensive software tools for data collection, processing, and reporting. Customize even complex methods with ease using workflow-oriented application modules. Enforce data security with optional INSIGHT Pro Security Software tools to assist with achieving current 21 CFR Part 11 compliance in your pharmaceutical lab. Baseline Flatness:±0.0015 A (200 to 800 nm), 2.0 nm SBW, smoothed Beam Center Height:8.5 mm Description:Evolution 350 Spectrophotometer Detector Type:Dual Matched Silicon Photodiodes Dimensions (L x W x H):53 x 61 x 38 cm (20.8 x 24 x 14.9 in.) Light Source:Xenon Flash Spectral Bandwidth:0.5, 1.0, 1.5, 2.0, 4.0 nm Selectable Wavelength Range:190 to 1100 nm Drift:<0.0005 A/hr., 500 nm, 2.0 nm SBW, 2 hr. warm up Electrical Requirements:100/240 V, 50/60 Hz For Use With (Application):Academic, Chemicals, Food & Beverage, Chemicals Environmental,Industrial QA/QC, Material Science, Pharmaceuticals Lamp Life:>5 years or longer if not using live signal Noise:Photometric0A: <0.00018 A,1A: <0.00022 A,2A: <0.00050 A,500 nm, 2.0 nm SBW, RMS Optical Design:Modified Ebert; Double beam with sample and reference cuvette/accessory positions Pharmacopoeia Compliance Testing:Wavelength Accuracy: ±0.3 nm 190–900 nm Wavelength Repeatability: SD 10 meas. <0.1 nm Absorbance Accuracy: <±0.010A at 1A, <±0.010A at 2A Absorbance Repeatability: ±0.0025A @ 1A Stray Light: 198 nm with KCl >2A, 220 nm with NaI >3A, 300 nm with acetone >3A, 340 nm with NaNO2 >3A Resolution: Peak/trough ratio >1.8 @ 1 nm SBW setting Photometric Accuracy:1 A: ±0.004 A, 2 A: ±0.004 A,3 A: ±0.006 A Photometric Display:±6 A Photometric Range:>4 A Photometric Repeatability:1 A: ±0.0025 A Scan Ordinate Modes:Absorbance, % Transmittance, % Reflectance, Kubelka-Munk, Log(1/R), Log(Abs), ABS × Factor, Intensity, 1st–4th Derivative Scan Speed:Variable, up to 6000 nm/min. Stray Light:198 nm: 2.4 A KCl 220 nm: 3.5 A NaI 340 nm: 4.0 A NaNO2 Wavelength Accuracy: ±0.20 nm (546.11 nm Hg emission line), ±0.30 nm, 190 to 900 nm Wavelength Data Interval: 10, 5, 2, 1, 0.5, 0.2, 0.1, 0.05 nm Wavelength Repeatability:Standard deviation of 10 measurements <0.05 nm Weight (English):48.5 lb. Weight (Metric):22 kg

F2 Mass Standard - slotted weights. Nominal value - 20 g.

The terminals are intended to designing scales with maximum resolution of 6000 e. PUE 5 series, simi (more)larly to the basic model, are enclosed in a stainless steel housing which allows for reaching the highest IP rating, i.e. IP 67. The terminals come standard with interfaces: 2 &times; RS232, 1 &times; RS485, 1 x Ethernet, 4 x USB 2.0. PUE 5 series can be extended by additional 3 weighing modules for simultaneous operation of maximum 4 weighing platforms. Intended Use: The terminal PUE 5 series is a multifunctional weighing device. It combines the best features of a PC computer and a scale. The PUE 5 operates on basis of OS Windows, creating the best option for configuring the device to individual customer requirements through installing corresponding application. If applied with dosing or formula making systems, the PUE 5 allows for operation with multiple weighing platforms, and simultaneous dosing with full process control. A dosing or formula making system that is configured on basis of the terminal PUE 5 series does not require an additional PC computer. Database editing is possible from the level of PUE 5 touch screen display or an optional PC keyboard. Area of Use: Main applications for terminal PUE 5 series: Designing industrial load cell scales; Multiple weighing applications supervised by a computer system through Ethernet module; Possibility of connecting large quantity of additional weighing platforms to industrial terminals. Terminal type: PUE 5.15C &ndash; capacitive touch panel. IP67 protection class. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Ohaus 30400186 Modular Heat Block, 9 x 21 mm Vials The Ohaus 30400186 Modular Heat Block, 9 x 21 mm  (more)Vials is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400186 Modular Heat Block, 9 x 21 mm Vials includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036304390 Overhead Stirrer Impeller, BR 10 Cross-Blade Due to its blade dimensions, the cro (more)ss-blade impeller BR 10 is ideally suited for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 100 mm, ideal ground clearance: 5 mm, ideal filling level: 100 mm, and ideal volume: 800 ml. The cross-blade impeller BR 10 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036304390 Overhead Stirrer Impeller, BR 10 Cross-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty