Edwards nXDS6iC Dry Scroll Pump

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260 This was removed from a university lab where I was s (more)urplus to requirements. The unit has not been tested but is in good cosmetic condition with marks from use. The turbo fan blade moves freely and are in good cosmetic condition. DN 100 ISO--K, 2PMod - Nr PM P02 13019 pin DIN MALE connector port is in good cosmetic condition. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Pfeiffer MVP 015-2 Diaphragm Pump Final Pressure 3.5 hPa / 2.625 Torr / 3.5 mbar Maximum Pumping Sp (more)eed 0.7 m3/h / 0.41202 cfm / 11.6669 l/min Number of Heads/Stages 2/2 Features - Diaphragm pump with a pumping speed of up to 0.7 m3/h - No hydrocarbons, completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 015-2 Diaphragm Pump is a high-performance, completely dry and oil-free diaphragm pump that operates without hydrocarbons. With a maximum pumping speed of 0.7 m3/h and a final pressure of 3.5 hPa / 2.625 Torr / 3.5 mbar, this pump is designed for efficiency and durability. It features two heads and two stages, ensuring robust operation. The pump is also equipped with gas ballast to handle a final pressure up to 4.5 hPa / 3.375 Torr / 4.5 mbar. Its compact design, low noise level, and minimal vibrations make it ideally suited for laboratory use. It operates with low maintenance costs and long intervals between maintenance. The MVP 015-2 supports all worldwide voltages and includes features like forced convection air cooling and an integral leak rate of 5 x 10-4 Pa m3/s. Both the intake and exhaust pressures can handle up to 1,100 hPa. For connections, it utilizes G 1/8" flanges, with the exhaust incorporating a silencer. This pump is also cTUVus certified according to UL / CSA 61010-1, ensuring compliance with safety standards, and is classified under protection degree IP20/Type 1. INCLUDED: The Pfeiffer MVP 015-2 Diaphragm Pump includes: - Silencer - G 1/8" Elbow Union w/ Enclosed Hose DN 6 x 1000 mm w/ a Straight Union in G 1/4" at End - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN840.1.2FTP IP44 Diaphragm Pump Ultimate Vacuum 90 mbar (abs.) Maximum Flow Rate 65L/min (3.9  (more)m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free Thechemically-resistant UN840.1.2FTP diaphragm pump is a oil-free deviceused in a wide range of laboratory applications. These pumps transfer and pumpdown without contamination.The heart ofthis very compact pump is a KNF structured diaphragm. This patented diaphragmwas stress-optimized using the Finite Elements method. As a result, we wereable to make the pump smaller while increasing the service life of thediaphragm and improving performance. This pump is 115V. INCLUDED: The KNF UN840.1.2FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 TT.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 TT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards RV5 Vacuum PumpFeatures - The RV is a truly versatile pump for operation throughout for your (more) operations, perfect for wet applications, dusty applications and clean dry applications. - The RV series of pumps has the highest vapor handling capacity of any rotary vane pump. This is ideally suited for your wet pumping applications such as freeze drying, extraction, filtration and gel drying. - The best-in-class anti-suck back protection prevents dust or oil mist from entering your system. The fast-acting automatic inlet valve acts within 0.4 seconds. - The universal motor in the pump covers the widest possible voltage and frequency range from a single motor. - You can service and replace parts without dismantling the pump mechanism. All parts self-align, eliminating the need for special assembly. Pump valve has "controlled" opening on power startup so that the system vacuum will never see a pressure surge on startup The RV uses a high-quality "universal" motor to cover the widest possible voltage and frequency range. A one-size Allen key is used to dismantle all parts of the RV pump. All rotor and stator parts are completely interchangeable The RV series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications.Click Here to View Product Video INCLUDED: The Edwards RV5 Rotary Vane Vacuum Pump includes: - Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Conne (more)ction NW40 Pumping Speed Nominal 2,820.00 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics. The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller. nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller. The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Click Here to View Product Video INCLUDED: The Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Ohaus Scout STX portable scale, with plate Ø 93mm These balances are ideal for laboratory and indust (more)rial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically

This listing is for a Brand New Harvest Right XL Home PRO Freeze Dryer sold through ULMfreezedryers. (more)comWe are stock holders in UKA home Pro freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle.What’s IncludedXL Freeze DryerXL Premier Industrial Vacuum Pump (approx. £1600 value)Vacuum Pump OilOil FilterStainless Steel Trays (set of 6)Guide to Freeze DryingMylar Bags (50 ct)Oxygen Absorbers (50 ct)Impulse Sealer FeaturesTray space: 2251 sq. inchesFreeze dry 18 to 22KG. fresh food per batchFreeze dry up to 4536KG. fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year) DimensionsFreeze dryer exterior dimensions: 617mm W x 950mm D x 904mm HPerfect for counter top, cart, or table. Weight of freeze dryer: 117KG 10 CFM industrial vacuum pump included/no extra cost (approx. £1600 value) PowerStandard UK 230v  Shipping InfoThe large freeze dryer ships in one package with a total weight of 243 lbs. One freeze dryer package: 29″ W x 38″ D x 48″ H. MaintenanceReplace vacuum pump oil every 20 to 30 batches (takes about two minutes)Clean freeze dryer as needed. Warranty1 Year international warranty provided by Harvest Right.

This item has just arrived in our stock. Please enquire for further details.

Heidolph Hei-TORQUE Ultimate 100 w/ USB & RS232 Interface Overhead StirrerThe Hei-TORQUE Ultimat (more)e 100 is a overhead stirrer with a wide speed range (10 - 2,000 rpm) and a maximum torque of 100 Ncm. It can powerfully stir viscosities up to 60,000 mPas or volumes up to 50 liters (H2O).In addition, the Hei-TORQUE Ultimate 100 offers, above all, the possibility of ramp programming, process monitoring (including timer function, torque trend display as a value), as well as the necessary equipment for documenting your application parameters. For this it is equipped with two interfaces - USB and RS232 - which give you the greatest flexibility to connect the device to a PC, a programmable logic controller (PLC) or an automation system such as e.g. LabManager. The scope of delivery includes the free Hei-Control software for remote control of up to 4 devices via PC.The overhead stirrer Hei-TORQUE Ultimate 100 performs every stirring task with minimal noise thanks to the latest engine technology. The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on.Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Ultimate 100 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools.*Stand, clamp, and impeller are sold separately*Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Ultimate 100 w/ USB & RS232 Interface Overhead Stirrer includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Branson 1/8" Microtips on 1" Center Horn Microtips for the SFX Sonifier are available in four sizes  (more)to handle volumes up to 150 ml. The microtips are also designed to process samples in the smallest diameter vessels.This tip is for use with the Branson 150 watt SFX and SLP Sonifier only. The 109-116-1566 has (4) 1/8" microtips on a 1" center horn.Branson 1/8" Microtips on 1" Center Horn SpecificationsBrand NameBransonTip Diameter1/8"MaterialTitaniumLength12.0 in., 4inWidth: 6.0 in.Material CategoryMetalHeight6.0 in.For Use WithSLPt, SLPe, and 150 watt model Branson Sonifiers

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW