Edwards nXDS20iC Dry Scroll Pump

VACUUBRAND MV 10 NT Diaphragm Pump Ultimate Vacuum 0.5 mbar Max. pumping speed at 60 Hz 6.1 cfm Nu (more)mber of Heads/Stages 8/4 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Four-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases when the need is to reach fractional millibar ultimate vacuums. All parts in contact with pumped vapors or gases are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of non-corrosive applications. These pumps provide the advantageous combination of high pumping speed with an extraordinary good ultimate vacuum down to 0.5 mbar. The highly flexible, fabric-reinforced double diaphragms made of FKM offer extended operating life. Eight-cylinder NT pumps features quiet operation, smooth and easy to clean surfaces. Four-stage diaphragm pumps are an excellent choice for continuous, contamination-free evacuation and pumping of non-aggressive gases under the very high vacuum demands of applications in physics and analytics. They generate a clean vacuum, as they are designed without any contact seals, hence no abrasion or dust is produced that might creep back into the application. Due to the outstanding ultimate vacuum, these pumps are often used as alternative to rotary vane pumps. A typical application is the use as backing pump for turbomolecular drag pumps. Additionally, the VARIO® design provides vacuum control by precise adjustment of the diaphragm pump´s motor speed. Depending on the application, the demand-responsive motor speed control results in unsurpassed lifetimes of service parts such as diaphragms, as well as optimal performance for backing of turbo pumps.INCLUDED: The VACUUBRAND MV 10 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230 (more)VACFeatures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3P2-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(8) { background-color: #fffacd; }

Heidolph Rotavac Valve Control Vacuum Pump Ultimate Vacuum 7 mBar Suction Capacity 2 m³/h Nominal R (more)otation Speed 1,800 RPM Features - Suction capacity for up to three rotary evaporators at the same time - Vacuum can be controlled through valves or manual vacuum controllers - Depending on your application, you can use the Switchbox to turn the vacuum pump on and off - A vacuum valve is required to combine this vacuum pump with Hei-VAP Expert Control/Ultimate Control rotary evaporators All components that come in contact with media are made from chemically resistant fluoropolymer. The durable PTFE design guarantees a superior diaphragm lifespan. Head cover and clamping disc have a stable core made from metal that offers unsurpassed long-term performance. The direct pump drive (without belt) has no wear parts, is exceptionally quiet and creates a very low vibration environment. The physically optimized gas ballast valve prevents from condensate collecting in the pump. Condenser is not in scope of delivery.INCLUDED: The Heidolph Rotavac Valve Control Vacuum Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Edwards nXDS6i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases and (more) bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS6i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Digital Display, Total Control of Operations AREX Digital PRO is the evolution of our best-seller, t (more)he most advanced tool available to date. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). The SpeedServo ™ system ensures a constant speed even when the viscosity varies (counter-reaction). AREX Digital PRO offers the most advanced technology, being equipped with digital displays to set and monitor both stirring speed and temperature constantly and with absolute precision. Temperature regulation of the liquid being processed with an external probe The AREX Digital PRO package includes the external Pt100 probe, capable of reaching 250°C, with an accuracy of ±1.0°C, providing a ready-to-use system capable of directly thermoregulating the sample being processed. Previous model video: Maximum Temperature Homogeneity The particular CerAlTop™ plate, in aluminum alloy coated with a ceramic layer, ensures a formidable homogeneity of the temperature over the entire surface of the plate itself, up to 370°C and at the same time an excellent resistance to chemical agents and ease of cleaning. Maximum Protection, IP 42 AREX Digital PRO magnetic stirrers guarantee a high level of safety and protection for the user. The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. AREX Digital PRO can be programmed with a maximum safety temperature, for some particular applications that require specific temperatures and in order to prevent unpleasant situations. In addition, the electronic board activates a high temperature warning ('Hot Plate Warning') which remains active even with the instrument off, when the plate temperature is above 50°C. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design AREX Digital PRO offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use and make it clear that the digital displays indicating speed and temperature can be read. Greater Versatility with the new MonoAlublock™ and MultiAlublock™ The MultiAlublock™ and the new MonoAlublock™ made of aluminum are ideal for carrying out numerous agitation and heating analyzes, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, you can choose the mix that best suits your needs. Technical features: Pt100 connection: provided Vertex connection: provided Counter-reaction: constant speed Electronic temperature regulation: from room temp. to 370°C Maximum safety temperature digitally settable: temperature limit can be set between 50 and 370 °C "Hot Plate Warning"  whenever the top plate temperature is over 50 °C Sample thermoregulation: ± 0.5 °C by using the Vertex thermoregulator (AREX Digital PRO); ± 1.0 °C by using Pt100 Stirring system: high-power driving magnet type ''PCM'' operated by a mono-phase motor for continuous operation

Yamato IN-604-115V Refrigerated Incubator Programmable 143L, 115V Refrigerant R134A Operating Temp (more)erature Range Ambient +10-50°C Temperature Accuracy ±0.3°C Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Made of Stainless steel (exterior) and Chrome free electronic galvanized plated steel plate chemical proof baking finish (interior) - Includes Self diagnostic function - Comes with 1 Year Manufacturer's Warranty

Edwards E2M28 Vacuum Pump Ultimate Vacuum 1 x 10-3 mbar / 7.5 x 10-4 Torr Inlet Connection NW25 Fl (more)ange Displacement 38.9 m3h-1 / 22.3 ft 3min-1 Features - Quiet operation ensures a more comfortable working environment, ideal for spaces where noise reduction is crucial. - Features a compact, freestanding design for flexible use across various settings without requiring additional support. - Proven reliable performance in a wide range of laboratory and industrial applications, showcasing its versatility and dependability. - Incorporates a gas ballast valve, essential for effectively pumping vapor without condensation inside the vacuum pump. - Built-in motor protection systems include cooling by an external fan and thermal overload protection that automatically resets. - Maintenance is simplified with an O-ring sealed sight glass for easy monitoring of oil levels and conditions at a glance. - Designed for effortless oil changes, featuring an oil drain port at the end of the oil box for convenient oil removal. - Facilitates easy oil top-ups through a large filling port and a recessed top, minimizing spills and maintenance time. The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.Click Here to View Product Video INCLUDED: The Edwards E2M28 Rotary Vane Vacuum Pump includes: - Edwards Ultragrade 19 Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW