Edwards nXDS20i Dry Scroll Pump

Labor port N 840 G KNF Diaphragm vacuum pump resistant to chemical and corrosive liquids, compact an (more)d oil-free. The pump capacity is manually adjustable with a simple knob. Laboport is equipped with gas ballast, PTFE/TFM heads, PTFE lined diaphragms and FFPM valves. It is suitable for a wide range of laboratory applications, including extremely aggressive/corrosive gases and vapours. - Flow rate (max.): 34 l/min - Final vacuum (max.): 6 mbar (abs.) - Adjustable speed control - ATEX compliant only for internal atmosphere (Ex) II 2/-G IIB+H2 T3 - Ideal for extremely aggressive/corrosive gases and vapours - Clean operation, 100% oil-free Technical features - Flow rate (max.): 34 l/min - Final vacuum (max.): 6 mbar (abs.) - Pressure (max.): 0.1 bar (rel.) - Permissible fluid temperature between 5 and 40°C - Valve material: FFPM - Diaphragm material: PTFE coated - Pump head material: PTFE Applications - Centrifugal concentration - Degassing - Drying - Distillation - Drying of the gel - Rotary evaporation - Solid phase extraction Qualitative characteristics - Adjustable speed control - ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 - Ideal for extremely aggressive / corrosive gases and vapors - Chemically resistant PTFE / FFPM flow path - Clean operation, 100% oil-free - Compact, silent and reliable - Maintenance free - Small footprint to optimize workspace Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION Presentations of the Laboport line directly from the specialists who created it. English subtitles. Presentation of the new Laborports and SMART KNF control.

This Leybold Trivac Ruvac Pump System was removed from a university lab where it was surplus to requ (more)irements. The unit has been inspected and refurbished by a service engineer. The unit is in great condition and performs well at 6 x 10-4 M/bar. It has CF40/65 oil filtration and ARS 40/65 oil mist filtration. The set runs on PFPE fluid.The Trivac was serviced on 09/22, Job no. S01064. Performing at 3x10-3 m/BA.The Ruvac was serviced on 09/22, Job no. S01064. Performing at 6x10-4. It is made up of the following;1x Leybold Vacuum Adapter for Ruvac 150/250Nr: 165 30 1x Leybold Vacuum RuvacType: WS251 PFPE11727Nr: 20200017781 1x TrivacModel: ARS 40-65Nr: 1895720900110457 1x TrivacModel: CF 40-65Nr: 1019720200027963 1x Emod MotorenType: VJF 9072-100Nr: 03612840

This listing is for 1 of 2 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immidate realese. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the benchtop.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pumpheads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pumpheads if lower pulsing is required, or with 313D2 or 314D2 pumpheads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) microcassette pumpheads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pumphead. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel The Gilson MINIPULS 3 Peristaltic Pump Head (more), R4 Four Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS35iE Enhanced Dry Scroll Pump Ultimate Vacuum 0.03 mbar (0.02 Torr) Peak Pumping Speed 3 (more)5 CFM (21 m3/h-1) Inlet Connection DN 40 ISO-KF (NW40) Features - Proven dry, clean vacuum solutions for a broad range of applications - Features smart drive technology for optimal global performance - Enhanced with double start scroll form technology and by-pass valves - Reduced peak power requirements at roughing pressures for efficient operation - Continuous higher roughing speeds to handle special application needs - High flow gas ballast feature allows pumping of vapours, including water vapour up to 240 gh-1 - Simple single-sided scroll design facilitates quick and easy maintenance - Offers up to 25% increased pumping speed at roughing pressures for frequent cycling - Equipped with DN 40 ISO-KF (NW40) inlet and DN 25 ISO-KF (NW25) outlet for effective connectivity The Edwards XDS35iE Enhanced Dry Scroll Pump represents a cutting-edge solution in dry, clean vacuum technology, suitable for a wide array of applications. This pump is equipped with double start scroll form technology and by-pass valves, enhancing the original XDS35i family by increasing the roughing performance and capacity for large volume evacuations. The pump's smart motor drive ensures consistent global performance, includes overload protection, and facilitates remote start/stop operations. A key feature is the high flow gas ballast, allowing the handling of water vapour and other vapours up to 240 gh-1. Maintenance is streamlined thanks to its simple single-sided scroll design, ensuring low ownership costs and maximum uptime. Additionally, the pump features reduced peak power requirements by up to 20% during initial pump down and provides up to 25% more pumping speed at roughing pressures, ideal for high frequency cycling applications. The pump achieves an ultimate vacuum of 0.03 mbar (0.02 Torr), which slightly increases with gas ballast usage, and offers a peak pumping speed of 35 CFM. It is designed with a DN 40 ISO-KF (NW40) inlet and a DN 25 ISO-KF (NW25) outlet, ensuring efficient connectivity and robust performance. Click Here to View Product Video INCLUDED: The Edwards XDS35iE Enhanced Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards Silencer for nXDS and XDS5/10 Dry Scroll PumpsFeatures - Compact design combines both filtra (more)tion efficiency and noise reduction - Integrated inlet diffuser optimizes sound attenuation - Multi-stage noise reducing features including final stage sound absorbent insert - Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop - Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element - Seamless drawn housings - no welds to rust or vibrate apart - Durable carbon steel construction with black powder coated finish - Ability to mount vertically or horizontally The Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps has two main functions: to reduce exhaust noise during pump down and gas ballast operation as well as to collect and retain tip seal dust as the pump is operated. Exhaust gases exit the exhaust port when the pump is being used to evacuate a process chamber, or when the gas ballast control is being used, or both. The noise level when pumping down rises as the throughput increases and the silencer is used to reduce this noise level. The outer can is made of pressed steel and is split to allow access to the filter elements. The filter element housing is made from Santoprene thermoplastic elastomer. The element itself is polyester. The foam block is manufactured from filter foam. INCLUDED: The Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps includes: - NW25 Clamp - Centring Ring - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Talboys Tube Block for 2ml Tubes, Cat # 980TAMTB20 The Talboys Tube Block for 2ml Tubes, Cat # 980TA (more)MTB20 is an interchangeable tube block with rack and cover to hold 24 2ml tubes. INCLUDED: The Talboys Tube Block for 2ml Tubes, Cat # 980TAMTB20 includes: - Full 6 Month Parts and Labor Warranty

Branson Catenoidal Horn 1/2 in Diameter Solid Catenoidal horn disruptor horn, 1/2″ diameter, solid  (more)for processing sample volumes of 10 – 250 ml, not usable with accessory chambers, used with Branson SFX250, SFX550, S250A, and S450AINCLUDED: The Branson Catenoidal Horn 1/2 in Diameter Solid includes: - Manufacturer's Documentation Request a Formal Quote

Old Interscience FID Trace GC without software