Edwards nXDS15i Dry Scroll Pump

Two-headed, chemically resistant, dry-running diaphragm pumps for a wide range of laboratory applica (more)tions. For transporting and evacuating without affecting the media. • 100% oil-free transfer so media cannot be contaminated during pumping, evacuating or compressing • Very suitable for vapors and condensates • Suitable for aggressive and corrosive gases and vapours • Maintenance-free, environmentally friendly • Flow rate: 20 L/min (at atmospheric pressure) • Working pressure: 1.0 bar • Final pressure (abs): 8 mbar • Max. pumping speed 1.2 m3/h

Dimensions (H x W x D): 390 x 340 x 600 mm

Varian Turbo-V 250 Macro Torr Pump System This system was removed from a university where it was sur (more)plus to requirement. All elements are in good cosmetic condition and the blades move freely on the Varian Turbo-V 250 Macro Torr Pump. We are unable to test further at our facility. All items included in the system: 1 x Varian Turbo-V 250 Macro Torr Pump:Model no. 9699008S016 1 x Multigauge controllerPart no. V209600 1 x Varian Turbo-V250 C.U Pump controller:Model no. 9699425S004 1 x Multigauge RS232 Board instruction manualPart no. L6439309 1 x Turbo-V 250 Controllers Instruction manualModel 969-9423Model 969-9523Model 969-9425 1 x Turbo- V 250 Pumps Instructional manual969-9007 Series969-9008 Series All cables shown in the images are included.

VACUUBRAND ME 2 NT Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Speed 1.4 CFM a (more)t 60Hz Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Very low vibration. - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. Diaphragm vacuum pumps are an excellent choice for applications with non-corrosive gases and vapors. The materials used in these pumps like aluminum and special plastics are opening a wide range of applications. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. INCLUDED: The VACUUBRAND ME 2 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump The Eppendo (more)rf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump (catalog number 022820168) was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. The advanced heating technology provides best treatment for your sample which assures quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. Our new coated lid provides superior chemical resistance against aggressive acids and organic solvents . INCLUDED: The Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump includes: - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump SpecificationsVacuum20 hPa (20 mbar)Sample Capacitymax. 144 vessels/2 microplatesFixed Speed1,400 rpmTube Volume0.2-50mlVolume Range72mlPower Supply120 V, 50-60HzMax. Power Consumption350WDimensions (W x D x H)33 x 58 x 29cmWeight w/o accessories31.5kg

Series 3 digital force gauges are designed for tension and compression force testing in numerous app (more)lications from 0.5 N to 500 N. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

Scilogex D160 Homogenizer Stand H-370 INCLUDED: The Scilogex D160 Homogenizer Stand H-370 includes (more): - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System Common Applicatoins Semic (more)onductor Analysis, and Laser Based Research Methods Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. - Trinocular tilting head 3°-30° provides ease of use across a variety of applications. The PSM1000E is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System includes: - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty