Edwards nEXT730D - ISO-K160 BP NW25 Turbomolecular Pump

Technical features Flow rate: 0.2-1.3 l / min Suction (max.): 3 mWg Operating pressure (max.): 1 bar (more) (rel.) Permitted fluid temperature: 5-80°C Maximum permissible viscosity: 150 cSt Valve material: FFKM Membrane material: PTFE coating Pump head material: PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 8 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

VACUUBRAND PC 101 NT Chemistry Pumping Unit Ultimate Vacuum 7 mbar / 5 torr Maximum Pumping Speed 1 (more).4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - High performance even at low vacuum levels. - Optimized vacuum even with gas ballast for condensate purge. - Whisper quiet and very low vibration. - Manual vacuum control, analog vacuum display. This chemistry pumping unit has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. Typical applications are rotary evaporators and vacuum drying ovens. The manual flow control valve regulates the effective pumping speed at the vacuum connection, the vacuum manometer offers an analog vacuum display. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment. INCLUDED: The VACUUBRAND PC 101 NT Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VACFeatures -  (more)Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3T1-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

KNF UN820.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 20L/min  (more)(1.2 m3/h) Protection Class IP44 Features - Clean, 100% oil-free operation - Corrosion-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Self-drying system removes condensate without affecting the vacuum level - Maintenance-free The chemically-resistant series N820.3FT.40P diaphragm pump is a two-stge unit with an integrated PowerDry self-drying system. There is a wide range of applications for this pump in laboratories, especially whenever clean vacuum is required and moist gases must be pumped down. Examples include vacuum-drying of vacuum oven chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used universally. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. This pump is 115V.

KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit (more) most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Rotavac Vario Pumping Unit, 115VFully controllable stand-alone pumping unit including vacuu (more)m controller. For use with For Hei-VAP Value and Hei-VAP Advantage rotavapor models. The precise vacuum control prevents bumping and loss of your samples. Thanks to the automatic vacuum supply to the process parameters, you have more time for important laboratory activities. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducing process time by 30 % - Solvent recovery of up to 99 % - Once the required vacuum is reached, the pump automatically stops and reliably keeps the vacuum at the desired level - Minimized runtime saves energy and significantly increases the lifespan of the diaphragm - These pumps guarantee minimum noise and vibrations during operation - Rpm-regulated pumps achieve the most precise vacuum INCLUDED: The Heidolph Rotavac Vario Pumping Unit, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

3D Systems Monochrome ProJet 360 3D Printer Floor Standing w/ Consumables Lab This item was removed  (more)from a university where it was surplus to requirement. It is in good cosmetic condition and powers on. The previous client has stated it was fully functional when last used. The table shown in the second image is not included. Also included: - 2 x 1 litre Visijet PXL Clear order No. 360434 - 1 x 7kg tub of ZP131 printing media powder - 1 x Litre 3D Systems ZB 60 clear binder solution - 1 x Data lead - 1 x Small grease gun - 1 x 49g tube of multi-purpose grease - 1 x 59ml bottle of 3D systems cleaning solution Part 360 444 - 5 x Small cleaning brushes - 2 x Hand scrapers

Hermle 6 x 50 Rotor for Z206-A The Hermle 6 x 50 Rotor for Z206-A is a high-performance centrifuge r (more)otor designed for use with the Hermle Z206-A series centrifuge. With a maximum capacity of 6 x 50ml tubes, this rotor allows for efficient processing of moderate volumes of samples. The rotor's 40° angle helps to ensure optimal separation of samples during centrifugation. With a maximum speed of 6,000 RPM and a maximum RCF of 4,427 x g, the Hermle 6 x 50 Rotor is capable of high-speed separations, making it ideal for a wide range of applications, including molecular biology, biochemistry, and clinical research. Its compatibility with the Hermle Z206-A series centrifuge provides a reliable and efficient solution for laboratories using this centrifuge for sample processing. INCLUDED: The Hermle 6 x 50 Rotor for Z206-A includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-VAP Ultimate HL/G3B Coated Hand Lift w/ G3 XL Vertical GlasswareThe Hei-VAP Series of r (more)otary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 7" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Ultimate HL/G3B Coated Hand Lift w/ G3 XL Vertical Glassware includes: - Heating Bath - Control Panel - G3B XL Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty