Edwards nEXT730D - CF160 BP NW25 Turbomolecular Pump

Edwards XDS5 Dry Scroll Vacuum Pump This system was removed from a university lab where it was surpl (more)us to requirements. The unit is in very good cosmetic condition and in working order. Specifications:- Serial No.: 46050723 - Code: A72401903XS - Running Hours: 29,726

Leybold Sogevac SV100B Model no. SV100 109 10 Rotary Vane Vacuum Pump This was removed from a unive (more)rsity lab where ti was surplus to requirements. The pump has been professionally serviced and recertified. It has had a new oil mist filter, oil filter and oil. It is in full working order. It is in excellent cosmetic condition.

KNF SIMDOS 02 IP65 FEM 1.02 ST.18RC Diaphragm Liquid Dosing Pump Flow Rate Range 0.03 to 20 ml/min  (more)Programmable Dosing 0 to 999 ml Maximum Suction Height 2 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Cycle mode - Adaptable to fluid characteristics The KNF SIMDOS 02 IP65 FEM 1.02 ST.18RC Diaphragm Liquid Dosing Pump is a liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate and dosing volume with LCD graphic display. INCLUDED: The KNF SIMDOS 02 IP65 FEM 1.02 ST.18RC Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 ST.18RCP Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The FEM 1.02 ST.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 ST.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

nEXT Pumps Ultimate Vacuum <3.5x10-9 mbar Inlet Connection DN 160 ISO-K Pumping Speed Nominal 4,3 (more)79.99 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications Edwards nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. With the nEXT730 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 730 l/s. INCLUDED: The Edwards nEXT730D - ISO-K160 BP NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT400T HC - CF160 160W Turbomolecular Pump Ultimate Vacuum <1x10-10 mbar Inlet Connecti (more)on DN160CF Pumping Speed Nominal 2399.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT400D - CF160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Oxford Cryosystems 600 Series Cryostream Cooler Controller was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

This Stratagene MX3000P Multiplex Quantitative RT- PCR System was removed from a university lab wher (more)e it was surplus to requirements. The system is in good cosmetic condition. All units power up and communicate, we are unable to test the system further at our facility. The software installed is MxPro 4.10 Build 389. The system consists of the following: 1x Hewlett-Packard EliteDesk PC 1x IiyamaMonitor 1x Hewlett-Packard Keyboard 1x Dell Mouse 2x VGA connecting cables

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 30 mm, length: 250 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

Ohaus PR323N/E PR Series Precision BalanceOffering accuracy and repeatability in essential weighing  (more)applications in laboratory, industrial andeducation settings, PR Analytical and Precision Balances deliver competitive performance at aneconomical price. Featuring RS-232 connectivity for easy communication, and a backlit display and asimple interface for uncomplicated operation, the PR is perfectly designed for your workplace. The PR is equipped with three essential weighing modes, RS-232 connectivity for datatransfer and storage, making it ideal for routine weighing applications. Equipped with an easy-to-read, bright backlit display and a simple user interface,the PR is incredibly easy to operate, with almost no training required. The PR’s small footprint saves desktop space while providing a large weighingsurface. The PR is durably constructed, and features a stainless steel panto withstand day-to-day use in the workplace. Click Here to View Product Video INCLUDED: The Ohaus PR323N/E PR Series Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty