Edwards nEXT240D - CF100 160W Turbomolecular Pump

Pumpdrive model 7544-20 (speed 20 rpm) Housing material: Polysulfone Rotor material: Cold-rolled ste (more)el Rollers: Three; cold-rolled steel Occlusion: Average, fixed mL/rev: Depends on tubing selected Accepted tubing: L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, L/S 18 Min flow rate: 0.06 mL/min (at 1 rpm with L/S 13 tubing) Max flow rate: 2300 mL/min (at 600 rpm with L/S 18 tubing)

Leybold OERLIKON TURBOVAC WIDE RANGE Turbo Pump Type TW 690MS 800052V0001 This was removed from a un (more)iversity lab where it was surplus to requirements. It is in good cosmetic condition, we are unable to test it further at our facility. The fan blades move smoothly manually.

Hoefer VP200 Diaphragm Vacuum Pump for GD2000 Vacuum Gel Dryer Ultimate Pressure 9 mbar Max. Pumpin (more)g Speed(60 Hz) 1.2 cfm Rated Motor Speed at 50/60 Hz 1500/1800 rpm Features - Optimized for use with the Hoefer GD2000 Vacuum Gel Dryer - High resistance to water vapor, acid, and gel staining solution vapors - Dual vapor trap flasks to capture condensate at pump inlet and outlet - Easy-to-remove flasks with single clamp design for quick cleaning - Robust, user-friendly design requiring minimal maintenance - 180 W motor with overload cutout for motor protection - Quiet operation with sound pressure level of 41 dBA - IP 54 protection rating for enhanced durability in lab environments The Hoefer VP200 Diaphragm Vacuum Pump is designed for efficient, reliable gel drying on the Hoefer GD2000 Vacuum Gel Dryer. Engineered to withstand exposure to water vapor, acidic solutions, and gel staining vapors, the VP200 is both robust and highly resistant to corrosive conditions. This vacuum pump includes dual vapor trap flasks at both the inlet and outlet to capture condensate, which can be quickly removed for cleaning thanks to a single-clamp design. With a powerful 180 W motor and a quiet 41 dBA operation, the VP200 operates smoothly with minimal maintenance required. Its IP 54 protection rating and durable construction make it a dependable choice for rigorous lab environments. INCLUDED: The Hoefer GD2001 Vacuum Gel Dryer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 TT.18RCP Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit (more) most laboratory liquid metering and dosing needs. The FEM 1.02 ST.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 TT.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS46i Dry Scroll Pump Ultimate Vacuum 5 x 10-2 mbar Inlet Connection NW40 Displacement 60 m (more) 3h-1 / 35 ft3min-1 Features - XDS scroll pumps provide dry, clean vacuum solutions, setting the standard for robust and efficient performance - Isolates the vacuum environment from all forms of lubricant, ensuring a hermetically sealed operation that prevents contamination - Offers a displacement of 60 m³/h and a peak pumping speed of 40 m³/h, ensuring high performance in demanding environments - Capable of handling maximum continuous inlet pressure of 40 mbar (30 Torr) and maximum continuous outlet pressure of 0.2 bar gauge - With a weight of 48 kg (105 lbs) and a noise level of 55.4 dB(A), it operates quietly and efficiently within a temperature range of 10 to 40 °C - Ensures reliability with a leak tightness of <1 x 10⁻⁶ mbar ls⁻¹ - Equipped with NW40 inlet flange and NW25 exhaust flange for easy integration into various systems XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. The C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. The C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port.INCLUDED: The Edwards XDS46i Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This Agilent 5183-2003 Nitrogen Gas Generator was removed from a university lab where it was surplus (more) to requirements. The system has not been tested at our facility. It is in good cosmetic condition with marks from use. The lab confirmed it was in good working order prior to removal.

Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 6 x 7.5 cm Maximum Power  (more)Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 325 ml Features - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Colored loading strips—for easy well detection when loading - Compact tank—reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit is a compact and efficient system tailored for routine nucleic acid preparatory and analytical electrophoresis. Designed for ease of use and consistent results, this unit can handle up to 32 samples per run, making it ideal for labs focused on high-throughput nucleic acid analysis. The SUB6 features a removable gel-casting tray with integrated silicone gaskets, allowing gels to be cast directly within the tank for a leak-proof setup. Equipped with color-coded, height-adjustable combs, the SUB6 enables easy comb thickness identification and precise control over well depth. The UV-transparent running tray allows users to image the gel without risking damage, while colored loading strips make well detection straightforward during sample loading. Its compact tank design reduces the buffer volume required, providing greater control over the voltage gradient and run time. Side handles ensure safe and easy transport around the lab, adding to the unit’s practical, user-friendly design. INCLUDED: The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Silicone Gasket* - 1 mm thick, 8-well combs, 2 pcs - Colored Loading Strips - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F1 Mass Standard - knob weights, service case. Nominal value - 1000 kg.