Edwards NEXT 300T HC ISO100 160W Turbomolecular Pump

MORE DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Technical specifications: 220 V, 50 Hz. Housing (D)x(H)x(W): 34 x 12 x 27 cm. See also documentation (more) for additional information.

This KNF Neuberger Laboport Diaphragm Pump Type - N840.3 FT.18 was removed from a university la (more)b where it was surplus to requirements. The unit powers up and is in good working order. It is in reasonably good cosmetic condition with some marks from use.

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 1.5 mbar Max. pumping speed at 60 Hz  (more)2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance. Three-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with high vacuum requirements. Typical applications are parallel and rotary evaporators, concentrators, drying ovens and many other laboratory applications. The MD 4C NT has an outstanding performance for pumping large amounts of vapor, e.g., out of drying ovens and gel dryers. This powerful pump is at the heart of a complete family of well-proven and reliable vacuum systems and pumping units for larger lab applications.INCLUDED: The VACUUBRAND MD 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Frontier™ 5000 Series FC5707-K Kit is a reliable, compact, low-speed multifunction centrifuge id (more)eal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5707-K model you will have the angular rotor with a maximum capacity of 8 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.445 g; maximum speed 6,800 rpm; tube diameter without adapter 18mm / 15ml, 1.5ml; outer/inner radius 86 mm; angle 32°. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN Compact design saves bench space: By packing all of its functionality into a small footprint, the FC5707 saves bench space in the laboratory. STRUCTURE AND FUNCTIONALITY Modern touch-wheel control and elegant waterproof interface: Designed for ease of use, the FC5707 features a convenient control on a waterproof user interface, which allows effective operation, even when gloves are worn. Simple and flexible operation for a wide range of applications: 8 x 15 mL angular rotor accommodates round bottom tubes or conical bottom tubes (only 4 conical bottom), including common blood tubes. Additionally, it can also be easily adapted with accessories to accommodate smaller tubes such as 7.5 and 1.5/2ml. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.800 rpm Maximum relative centrifugal force: 4.445 g Maximum flow rate (rotor): 8 x 15 ml Program memories: 99 Rotor Packaging: Angled Rotor: Rotore Angolare 8 x 15ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 15 ml Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

TOMY One Spin Mini Centrifuge New equipment in its original packaging Model/model number: One Spin - (more) mini laboratory centrifuge Maximum capacity: 1.5/2.0 ml microtubes x 4 Rotation speed: 4,000 rpm (±20%) *Fixed Centrifugal acceleration: 420-950 × g (1.5 ml) / 450-1000 × g (2.0 ml) Size/Weight: L105×D130×H96mm 0.38kg Single-phase power supply AC100-240V 50/60Hz 0.6A (dedicated power adapter)

Wesemann / Door cabinet ,  RT / White /  600x870x530

Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head This was removed from a lab (more)oratory where it was surplus to requirements. The unit powers up but is missing its control interface, but it is operable. Included are; KrosFlo Research II Pump:Model No. 900-1612 MasterFlex Pump Head:Model No 900-1613 Tubing Sizes:L/S 13, 14, 16, 25, 17, 18 Accessories: 1x RS232 to Male DIN Cable: 2x Pairs of GripsMaterial: Plastic 2x ArmsMaterial: Metal The units are bolted to a metal plate attached underneath the unit. They are in good cosmetic condition and can be easily removed if necessary. 1x Misc GripMaterial: Aluminium The unit is in good cosmetic condition. 2x Arm Grips:Material Plastic The units are in good cosmetic condition. They hold position well against the metal upright arms. 

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Julabo DYNEO DD-450F Refrigerated Circulator with Digital Output and Synthetic Refrigerant (R449A),  (more)115V/60Hz Refrigerant R449A Working Temperature Range -30°C - 200°C Cooling Capacity 440W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-450F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.44kW cooling power at 20 °C with 60W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-450F Refrigerated Circulator with Digital Output and Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty