Dolomite Mitos P-Pump System w/ Remote Chamber + Flow Rate Sensor

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Maximum prerssure inlet: 2.0bar Maximum pressure outlet: 3.4bar Dimensions (h x w x d): 215mm x 190m (more)m x 110mm

Capacity (max.): 5.5 l/min Final vacuum (max.): 160 mbar Operating pressure (max.): 2.4 bar Permissi (more)ble medium temperature: 5 – 40 °C Permissible ambient temperature: 5 – 40 °C Weight: 1.9kg

Genevac Boc Edwards Scroll Pump Model XDS5 This item was removed from a university laboratory where  (more)it was surplus to requirements. It powers on and is in good cosmetic condition. Please note: The pump requires connection to a Genevac evaporator to initiate operation. Model: XDS5

KNF LIQUIPORT IP65 NF 100 FT.18S Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Suction  (more)Height (max.) 3 mWg Pressure (max.) 1 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splashproof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 100 FT.18S Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Expert 120 Peristaltic Pump The pump drive of the model 01 of the Hei-FLOW Expert  (more)series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are in the range of 0.38 — 813 ml/min; with multi-channel pump heads from 0.005 — 329 ml/min.By integrating an analog interface, it is possible to control all functions externally. In addition, an optional foot switch can be adapted to enable dosing by foot pressure. Hands thus remain free to perform other work, for example, to hold the tubing and the vessel. A speed of 5 — 120 rpm with a control accuracy of ±3.5% guarantees optimum process results. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Expert 120 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Programmable flow rate: 0.00 to 5.00 mL/min, 0.01 mL/min increments Maximum operating pressure: 401  (more)bar Pressure ripple: <2% at 0.5mL/min Flow precision: 2 seconds SD Flow accuracy: 2% of setting Gradient accuracy: <1% between 10 to 90% Gradient precisison: <0.5% RSD between 10 to 90% Gradient delay volume: <60 µL (without mixer), <200 µL (with one 50 µL mixer) Inline degasser channels: 2 Dimensions (HxDxW): 430 x 610 x 305 mm Weight: 27.2 kg

No matter how quickly you need to produce results or how much pressure you have to control costs, yo (more)u know that no margin of error is acceptable in a blood bank. We designed the ORTHO AutoVue Innova System to comprehensively address safety—from helping to reduce the potential for human error through increased automation and ease of use to increasing accuracy with dozens of additional process checks. So you can be ready to meet your toughest challenges with full confidence in the safety of your results.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database &ndash; access to databases Function &ndash; access to basic functions F1 and F2 &ndash; programmable function keys and menu navigation keys Reports &ndash; access to database of drying process reports Profile &ndash; access to parameters settings Sample &ndash; access to products database

Ohaus e-A51ST020 Overhead Stirrer The OHAUS Achiever™ 5000 Overhead Stirrers, equipped with an IP54- (more)rated sealed design, offer precise stirring for demanding applications. They incorporate keyless chuck and software-controlled speed ramping for consistent, safe stirring. The series includes five models with torque up to 200 Ncm and volume capacities up to 100 L.These stirrers serve diverse industrial processes, notably in the food, cosmetics, pharmaceutical, and construction sectors. Their LED digital display provides real-time speed data, torque tendencies, and incorporates an integrated timer. They operate between 6 rpm to 2000 rpm, with model-specific torque ranging from 20 Ncm to 200 Ncm and volume capacities between 25L to 100L.Constructed with sealed aluminum, they adhere to the IP54 protection rating. The brushless motor ensures quiet operation, and a main power switch facilitates user engagement. Design-wise, they are compact with intuitive controls, and feature safety measures against overload, overtemperature, and overcurrent scenarios.INCLUDED: The Ohaus e-A51ST020 Overhead Stirrer includes: - Power Cord - Two Year Manufacturer's Warranty