Cole-Parmer easyload masterflex pumpdrive

VACUUBRAND RZ 2.5 Rotary Vane Vacuum Pump Ultimate Vacuum 0.002 mbar (0.0015 Torr) Maximum Pumping  (more)Speed 1.65 CFM at 60Hz Number of Stages 2 Features - High flow rates even at vacuum levels approaching ultimate vacuum - Very good ultimate vacuum even with gas ballast - Vacuum-tight at switch-off; external anti-suckback valve not needed - Large oil volume: Long intervals between oil changes - Ease of maintenance due to telescopic design The one-stage RE 2.5 and two-stage RZ 2.5 are high-performance rotary vane pumps with extra compact design and low weight. They are the ideal solution for a wide range of laboratory and process applications that require a low ultimate vacuum at medium gas flow rate. Typical applications are lyophilization, fine vacuum distillation and evacuation of small volumes, e.g., for utilization of µ-focus x-ray tubes or filling with pure gases. INCLUDED: The VACUUBRAND RZ 2.5 Rotary Vane Vacuum Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND PC 620 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible result - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - PC 620 select allows simultaneous operation of two independent vacuum applications with electronic vacuum control This chemistry vacuum pumping unit is an economical, compact solution for simultaneous operation of two electronically controlled vacuum applications with a single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 620 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity to run two demanding applications simultaneously. Both vacuum ports have independent solenoid valves for electronic vacuum control, and check valves to protect against cross contamination and interference. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it constantly monitors the pressure and switches to a 2-point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage, and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. INCLUDED: The VACUUBRAND PC 620 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND ME 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Spee (more)d 1.4 cfm Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Outstanding chemical resistance. - Long diaphragm life, maintenance-free drive system. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. One-stage chemistry diaphragm vacuum pumps are an excellent choice for applications with corrosive gases and vapors which do not require very deep vacuum levels. Typical applications are vacuum ovens, filtrations as well as concentration of solvents with low boiling points. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. The well proven robust PTFE sandwich diaphragm provides outstanding reliability and operating life. INCLUDED: The VACUUBRAND ME 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards XDS46i Dry Scroll Pump Ultimate Vacuum 5 x 10-2 mbar Inlet Connection NW40 Displacement 60 m (more) 3h-1 / 35 ft3min-1 Features - XDS scroll pumps provide dry, clean vacuum solutions, setting the standard for robust and efficient performance - Isolates the vacuum environment from all forms of lubricant, ensuring a hermetically sealed operation that prevents contamination - Offers a displacement of 60 m³/h and a peak pumping speed of 40 m³/h, ensuring high performance in demanding environments - Capable of handling maximum continuous inlet pressure of 40 mbar (30 Torr) and maximum continuous outlet pressure of 0.2 bar gauge - With a weight of 48 kg (105 lbs) and a noise level of 55.4 dB(A), it operates quietly and efficiently within a temperature range of 10 to 40 °C - Ensures reliability with a leak tightness of <1 x 10⁻⁶ mbar ls⁻¹ - Equipped with NW40 inlet flange and NW25 exhaust flange for easy integration into various systems XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. The C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. The C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port.INCLUDED: The Edwards XDS46i Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Programmable flow rate: 0.00 to 5.00 mL/min, 0.01 mL/min increments Maximum operating pressure: 401  (more)bar Pressure ripple: <2% at 0.5mL/min Flow precision: 2 seconds SD Flow accuracy: 2% of setting Gradient accuracy: <1% between 10 to 90% Gradient precisison: <0.5% RSD between 10 to 90% Gradient delay volume: <60 µL (without mixer), <200 µL (with one 50 µL mixer) Inline degasser channels: 2 Dimensions (HxDxW): 430 x 610 x 305 mm Weight: 27.2 kg

Memmert HPP410eco Climate Chamber 384L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L (13.6 cu. ft.) capacity for flexible storage and incubation - Temperature range from +5 to +70°C with humidity, or 0 to +70°C without humidity - Precise temperature control with 0.1°C accuracy using dual Pt100 sensors - Humidity adjustable from 10% to 90% RH with external water supply - TwinDISPLAY with PID microprocessor control and high-definition displays - AtmoCONTROL software for USB and Ethernet programmability - AutoSAFETY with visual and acoustic alarms for temperature protection - Stainless steel door with inner glass and 2-point locking system The Memmert HPP410eco Climate Chamber 384L, 115V is designed to meet advanced climate control needs with its spacious 384-liter (13.6 cu. ft.) capacity. Engineered for precise temperature and humidity regulation, it offers a setting temperature range from +5°C to +70°C with humidity and 0°C to +70°C without. Dual Pt100 sensors in a 4-wire circuit provide reliable monitoring with a setting accuracy of 0.1°C, ensuring consistent conditions for sensitive applications. The humidity control ranges from 10% to 90% RH, supported by a self-priming external water supply and an efficient hot steam generator, while a Peltier-based cold trap system ensures effective dehumidification. User-friendly control features, including the TwinDISPLAY with an adaptive PID-microprocessor and two high-definition TFT displays, make it easy to adjust parameters like temperature, relative humidity, and program settings. The AtmoCONTROL software allows programmable control via USB or Ethernet, streamlining data management for long-term studies. Safety features like the AutoSAFETY system, visual and acoustic alarms, and robust stainless steel construction—including an inner glass door and a 2-point locking mechanism—ensure reliable operation and optimal protection of your samples. INCLUDED: TheMemmert HPP410eco Climate Chamber 384L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Scilogex iPette Plus 8-Channel Electronic Pipettor, 10-100ul iPette is an innovative electronic pipe (more)tte developed by SCILOGEX. It combines the feature of manual pipette as ergonomic and light weight with the feature of electronic pipette as labor-saving and high performance, it offers new pipetting experience to the users.SCILOGEX iPette Plus Electronic LED Digital Single Channel Pipettors bring form and function together reducing the risk of repetitive strain injuries. The LED display and easy tip ejection system are designed for left or right handed use. The lightweight design, comfortable handle and finger hook with light activation tip ejector ensures effortless repeatable pipetting. iPette's come with a convenient wall charger.iPette Plus Features: - Easy OperationIntuitive interface for setting functions and parameters. - Ergonomic DesignLow operation forces for complete work which is exceptionally fatigue-free. - Convenient and Versatile360° pipetting. Double knobs for simple and versatile control. Easy loading tip cones offers smooth and leak free operation. - Dual charging modesUse of USB charger or the charging stand to ensure uninterrupted use. INCLUDED: The Scilogex iPette Plus 8-Channel Electronic Pipettor, 10-100ul includes: - AC Adapter - USB Cable - Stand - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle 10 x 50ml Conical Rotor The Hermle 10 x 50ml Conical Rotor is a high-capacity centrifuge roto (more)r designed for use with Hermle Z32-HK, Z36-HK, Z327, Z366, Z446, and Z496 Series centrifuges. With a maximum speed of 10,500 RPM and a maximum RCF of 16,022 x g, this rotor is capable of efficiently and effectively separating biological samples. Its 38° angle allows for optimal separation, while its maximum capacity of 10 x 50ml provides ample space for larger samples. It is important to note that the maximum speed may vary depending on the centrifuge model used with the rotor. Overall, the Hermle 10 x 50ml Conical Rotor is a reliable and high-performing centrifuge accessory that can help researchers achieve their separation goals. INCLUDED: The Hermle 10 x 50ml Conical Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: 1°C to 15°C Dimensions (HxWxD): 1895 x 600 x 665 mm Internal dimensions (HxWxD):  (more)1690 x 500 x 450 mm Capacity: 406 L