Agilent SIPS Sample Introduction Pump System 1-Pump 1-Channel

Deliver precise vacuum and offer widely diverse control functions for a huge range of applications i (more)n the laboratory. The intuitive user guidance on the hand terminal ensures ease of operation; the process parameters can be entered over a touchscreen and a rotation knob. Ajustment capabilities: Units of measurement The operating language The operating mode Parameters, such as the setpoint pressure or suction capacity of the system direct over rotation knob. Depending on the selected operating mode, the graphic display of the hand terminal then indicates the respective process variables. The user can intervene in the ongoing process at any time with the hand terminal and its integrated touchscreen and rotating knob. The hand terminal can be located via vacuum pump system (paging); the hand terminal will answer with a signal tone. Four operating modes: Evacuate – The vacuum pump system evacuates a vacuum chamber with adjustable pump capacity. Pressure control – The vacuum pump system controls the system pressure to the set value (constant pressure). Automatic – The vacuum pump system automatically finds the vapour pressure of the sample and adjusts the process pressure accordingly. Individual pressure function – The vacuum pump system controls the process according to a user-defined pressure curve. The setpoint pressure and the opening and closing of the coolant valve (accessory) on the high-performance condenser can be easily entered for a range of set times. A repeat function allows successive repetitions of the programmed pressure curve.At any time during an active process, you can switch to manual process control. Functions for Evacuate and Pressure control will be available simultaneously. Flow rate (at atm. pressure): 1.26 m³/h Flow rate (at atm. pressure): 21 l/min Ultimate vacuum (< 5.0 with gas ballast valve in use): 2.0 mbar abs. Operating pressure (max.): 0.5 bar (rel.) Dimensions (WxHxD): 366 x 423 x 294 mm Weight: 15 kg

Watson Marlow 505S Peristaltic Pump with Pumphead 508MC2 505S Manual Drive 55RPM ( 056.5821.000 ) 50 (more)8MC2 Eight Roller Two Channel Micro Pumphead ( 053.6280.000 ) Maximum rotor speed : 55 – 220 RPM 100-120 V / 220-240 V | 50/60 Hz | 50 W This unit is in excellent working condition and very clean cosmetically. Feel free to contact with any questions.

Dionex P580A Low Pressure Gradient Degassing Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Quattroflow Fluid Systems 1200 Quaternary Diaphragm Pump QF 1200-SU This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks. 12cm Diaphragm2200 RPM Model- Quattroflow CVSerial number- 673786

ABB Extrel Mass Spectrometer w/ Pumps, Chiller &amp; Various Parts This was removed from a universit (more)y lab where it was surplus to requirements. All units have been powered up unless specified. It is in reasonably good cosmetic condition with minor marks. Molecular Beam System: TPU 240 Pfeiffer Balzers PM P01 620 Turbomolecular PumpModel: TPU 240Serial#: 12087358 Item is in good cosmetic condition.Unable to test. Edwards Active Pirani GaugeModel: APG-M-NW16Serial#: 006737606Untested Pfeiffer Vacuum TMH 520Model: TMH 520 ISSerial#: 12392520Untested Edwards E2M 28 Vacuum PumpModel: E2M 28Serial#: 10020344kg Mass Spectrometry Stack on frame consists of: Extrel Core Mass SpectrometersModel: Merlin QMS ControllerSerial#: 28934 ABB Extrel Quadrupole Mass SpectrometryModel: 150-QC Quadrouple Power SupplySerial#: 24512 ABB Extrel Quadrupole Mass SpectrometryModel: QMS DC Power SupplySerial#: 23678 Edwards Active Gauge ControllerModel: Active Gauge ControllerSerial#: D38655000 Extrel Quadruple Mass Spectrometry FanModel: N/ASerial#: 24561Untested. Pfeiffer Vacuum TCP 380 X 2Model: TCP 380Serial#: 7019428 MKS Baratron Power Supply and DPMModel: N/ASerial#: N/A Additional Parts: Edwards 18 E1M18&nbsp;Rotary Vane Vacuum PumpModel: E1M18Serial#: 00672735835kg Edwards 2 E2M2 Rotary Vane Vacuum PumpModel: E2M2Serial#: 0503530kg Particle Measuring System Inc Condensation Particle CounterModel: 761003Serial#: 816Date: Feb 1996 Pfeiffer Vacuum TCP 380Model: TCP 380Serial#: 7019428 Pfeiffer Blazers TCP 120Model: TCP 120 ASerial#: S4758 Horiba Triax Series 180 triple grating spectrometerModel: Triax 180Serial#: 0109-02-97 EMS Microtron 200 Microwave Power Generator Mark 3Model: Microtron 200Serial#: 111272 Julaba FE500 Compact recirculating coolerModel: FE500 GBSerial#: 9610050 4

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hoefer SE260 Mighty Small II Deluxe Mini Vertical Protein Electrophoresis Basic Unit Compatible Gla (more)ss Plate Sizes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 500 V, 500 mA, 12 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 10 x 10.5 cm - Flexible design, additionally able to accommodate 10 x 8 cm format with optional accessories - Supports a wide variety of precast gels - Efficient active cooling ensures sharp bands - Run up to two gels (maximum 30 samples) at one time under identical conditions - Quick and easy to assemble - Choose from a wide variety of accessories The Hoefer SE260 Mighty Small II Deluxe Mini Vertical Protein Electrophoresis Unit combines the advantages of a compact design with effective cooling, offering a reliable solution for precise protein and nucleic acid analysis. Optimized for high-quality electrophoretic screening, this unit accommodates glass plates up to 10 x 10.5 cm and can also fit 10 x 8 cm formats using optional accessories, providing versatility for various lab applications. With its efficient active cooling system, the SE260 ensures sharp, well-defined bands across samples, making it ideal for labs that prioritize consistency and accuracy. This electrophoresis unit can run up to two gels at once, processing up to 30 samples under identical conditions, which is particularly useful for comparative studies and high-throughput workflows. The SE260’s flexible compatibility with a wide range of precast gels, along with its straightforward assembly process, makes it easy to incorporate into different lab settings. Operating smoothly within standard lab conditions, it can handle temperatures up to 45°C and humidity levels up to 80%, ensuring robust performance in various environments. With power settings of up to 500 V and 500 mA, the SE260 is designed to support a range of experimental protocols. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber/Cooling Core - Safety Lid with High Voltage Leads - Casting Cradle w/Sealing Gasket Set - Casting Clamp Assemblies, 2 pcs - Cams, 4 pcs - Glass Plates, Rectangular, 10 x 10.5 cm, 10 pcs - Alumina Plates, Notched, 10 x 10.5 cm, 5 pcs - Spring Clamps, 4 pcs - Combs, 10 well, 2 pcs - T-Spacers, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal INCLUDED: The Hoefer SE260 Mighty Small II Deluxe Mini Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber/Cooling Core - Safety Lid with High Voltage Leads - Cams, 4 pcs - Spring Clamps, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ethernet cable (RJ45 connector). Cable length: 15 m Compatible with: Scales operated via PUE 5.15 (5 (more).19) terminal PUE 5.15 (5.19) terminal

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes: 11 mass standards, 1 tweezer. Applications: Calibration and verification of scales: Class E1 standards are ideal for calibrating and verifying precision analytical and laboratory scales. Metrological laboratories: The standards are indispensable in metrological laboratories where the highest measurement precision is required. Research andiIndustrial institutions: They are used in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.