Agilent / Pfeiffer turbo pump used with series 5975, systems 5975B, 5975C and 5975C-TAD

Deliver precise vacuum and offer widely diverse control functions for a huge range of applications i (more)n the laboratory. The intuitive user guidance on the hand terminal ensures ease of operation; the process parameters can be entered over a touchscreen and a rotation knob. Ajustment capabilities: Units of measurement The operating language The operating mode Parameters, such as the setpoint pressure or suction capacity of the system direct over rotation knob. Depending on the selected operating mode, the graphic display of the hand terminal then indicates the respective process variables. The user can intervene in the ongoing process at any time with the hand terminal and its integrated touchscreen and rotating knob. The hand terminal can be located via vacuum pump system (paging); the hand terminal will answer with a signal tone. Four operating modes: Evacuate – The vacuum pump system evacuates a vacuum chamber with adjustable pump capacity. Pressure control – The vacuum pump system controls the system pressure to the set value (constant pressure). Automatic – The vacuum pump system automatically finds the vapour pressure of the sample and adjusts the process pressure accordingly. Individual pressure function – The vacuum pump system controls the process according to a user-defined pressure curve. The setpoint pressure and the opening and closing of the coolant valve (accessory) on the high-performance condenser can be easily entered for a range of set times. A repeat function allows successive repetitions of the programmed pressure curve.At any time during an active process, you can switch to manual process control. Functions for Evacuate and Pressure control will be available simultaneously. Flow rate (at atm. pressure): 1.26 m³/h Flow rate (at atm. pressure): 21 l/min Ultimate vacuum (< 5.0 with gas ballast valve in use): 2.0 mbar abs. Operating pressure (max.): 0.5 bar (rel.) Dimensions (WxHxD): 366 x 423 x 294 mm Weight: 15 kg

Edwards Model E2M2 Rotary Vane High Vacuum Pump 2 Two stage Lab This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and draws suction but has not been tested further. It is in reasonably good cosmetic condition, with some marks from use.

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

KNF N920KT.29.18G Diaphragm Pump Ultimate Vacuum 2 mbar (abs.) Maximum Flow Rate 21L/min (1.2 m 3/h (more)) Protection Class IP20 Features - Clean, 100% oil-free operation - High suction speed, particularly in the low vacuum range - Adjustable speed control - Exceptionally quiet - Corrosion-resistant - Maintenance-free The powerful N 920 KT.29.18 G diaphragm vacuum pump uses a series of KNF technical innovations, including a special diaphragm stabilization system that makes it well-suited for all applications requiring high suctions speeds at low absolute pressures, in a compact size. INCLUDED: The KNF N920KT.29.18G Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 300 FT.18S Diaphragm Liquid Transfer Pump Flow Rate 0.5 to 3L/min Suction Hei (more)ght (max.) 3 mWg Pressure (max.) 1 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splash-proof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz® Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 300 FT.18S Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 12mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 1.100 FT.18S Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Suctio (more)n Height (max.) 3 mWg Pressure (max.) 4 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splashproof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 1.100 FT.18S Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Precision refrigerator for the safe storage of samples in the scientific and medical sector - Comple (more)te display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene cabinets injected with polyurethane foam that provides strong thermal insulation - Automatic internal LED lighting for lower energy consumption - Monobloc cabinet made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Motic BA410E 50W Halogen Trinocular Sextuple Compound Microscope (Light Split 80/20) Magnification R (more)ange 4x to 100x Optical System Color Corrected Infinity (CCIS) Illumination Quartz halogen 12V/50W Features - Trinocular head with Siedentopf type, 30° inclined and 360° rotating - Color Corrected Infinity Optical System (CCIS®) for enhanced optical performance - Focusable and centerable Swing-out Abbe condenser N.A. 0.90/0.13 with iris diaphragm for darkfield - Widefield N-WF10X/22mm eyepieces with diopter adjustment and rubber eyecups - Reversed sextuple nosepiece for smooth objective changes - EC-H Plan Achromat objectives: 4X, 10X, 40X S, 100X S-oil - Coaxial coarse and fine focusing system with tension adjustment and 1µm precision - Mechanical stage with low position rackless stage control and ceramic insert - Quartz halogen 12V/50W Koehler illumination with intensity control and external lamp house - Optional phase contrast, fluorescence (HBO), and polarization for advanced observation techniques The Motic BA410E 50W Halogen Trinocular Sextuple Compound Microscope is designed for precision and adaptability in advanced laboratory environments. Its trinocular head, featuring a Siedentopf type with 30° inclination and 360° rotation, ensures ergonomic viewing and flexibility. With the Color Corrected Infinity Optical System (CCIS®), the microscope delivers excellent image clarity and color fidelity. It includes a focusable Swing-out Abbe condenser with N.A. 0.90/0.13 and an iris diaphragm for darkfield, enhancing control over lighting. The widefield N-WF10X/22mm eyepieces, along with diopter adjustment and a reversed sextuple nosepiece, allow for smooth and efficient objective transitions. This model comes equipped with EC-H Plan Achromat objectives, including 4X, 10X, 40X S, and 100X S-oil, covering a range of magnification needs. The coaxial coarse and fine focusing system offers a precision of 1µm, ensuring accurate specimen analysis. The 12V/50W Koehler quartz halogen illumination with intensity control and external lamp house ensures optimal lighting for brightfield observation. Additionally, the Motic BA410E is compatible with advanced techniques like phase contrast, fluorescence, and polarization, making it an ideal choice for laboratories requiring high-performance and versatile imaging capabilities. Note: Fluorescence capable with use of Motic Complete Epi-Fluorescence Attachment for BA410E. Please Inquire.INCLUDED: The Motic BA410E 50W Halogen Trinocular Sextuple Compound Microscope (Light Split 80/20) includes: - Trinocular head Siedentopf type 30° inclined, 360° rotating (light split 20/80) - Reversed Sextuple nosepiece - Coaxial coarse and fine focusing adjustment - Built In Rackless Stage - Achromat Swing Out Condenser - CCIS Plan Achromat objectives EC-H PL4X, EC-H PL10X, EC-H PL40X S, EC-H PL100X S-oil - Widefield high eyepoint eyepiece WFPL 10X / 22mm - 45mm Blue Filter - Hexagonal Allen Key - Vinyl Dust Cover - Koehler Illumination Quartz Halogen 12V/50W - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco CentriVap High Capacity Micro Rotor Available in standard, or with fluoropolymer resin  (more)coating that ensures resistance to acids High capacity micro rotor holds up to 148 micro centrifuge tubes, 1.5mL or 2.0mL, and micro auto sample vials approx. 12mm in dia. x 35mm High capacity micro rotors don't require lip on the tube and are perfect for vials INCLUDED: The Labconco 7553500 CentriVap High Capacity Micro Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty