Agilent 1100/1200 Pump Drive Assembly G1311-60001 Lab

Technical features Flow rate 0.5–3.0 l/min Suction (max.) 3 mWg Operating pressure (max.) 1 bar (rel (more).) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

KNF IP65 FEM 1.02 FT.18S Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit mo (more)st laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 FT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Hei-FLOW Expert 600 Peristaltic Pump This model has a flow rate of 2.0 — 4,056 ml/min and i (more)s designed for operation with single-channel pump heads. The analog interface makes it possible that all functions can be controlled externally. A control accuracy of ±3.5% and a conveyor speed of 24 to 600 rpm provide optimum process conditions. In addition, sensitive media can be protected from influence by using the optional foot switch. Like all Heidolph peristaltic pumps, the conveying direction of this model can be changed by a simple push of a button. Furthermore, the accelerated filling and emptying of the tubing is simplified, since here only the button for the maximum speed has to be pressed. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Expert 600 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF)Features - Utilizes pos (more)itive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nXDS15iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS15iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS15iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Digital temperture control and selectable display of set and actual temperature PT100 sensor Timer 1 (more) to 99 min with audible alarm Overheating protection (even when bath is empty) Capacity: 16L Outer dimensions(w x d x h): 331mm x 396mm x 265mm Bath dimensions(w x d x h): 290mm × 300mm × 190mm Weight: 10kg Including rack with 36 spaces

This Syngene G:Box Chemi Gel Documentation Imaging System was removed from a university lab where it (more) was surplus to requirements. The system is in reasonable cosmetic condition but there are some scratches/marks on the exterior. The interior has some leftover residue. The item powered on without issue. We tested the transilluminator outside of the box. The university confirmed it to be working but they had no software for it. We were unable to test the camera due to lack of software. System details are as follows:1x Syngene TransilluminatorModel: GV4M25X30 1x Syngene G:BoxModel: GBOX CHEMI XL 1x Synoptics Art 1.4-Syn 022 Camera1x USB to 4-pin cable1x DE9 cable with USB adapter

The flow cytometer CyFlow Cube 6, fully self-contained and ultra-compact, has been designed for all  (more)applications in cell analysis and absolute count with the best ratio quality-performance/price. CyFlow Cube 6 provides a flow cytometry accurate with up to 6 optical parameters. Equipped with a blue and a red laser optional, and 4 fluorescence channels (FL1-FL4) more Forward Scatter (FSC) and Side Scatter (SCC) constitute an optical system, powerful and affordable flow cytometry. PC and software CyView integrated. Optional: automatic Charger optional CyFlow Robby for well plates and tubes. It shows the price for the model CY-S-3060R_V2 - CyFlow® Cube 6 Microbiology - (1 laser 488 nm; 5 parameters). For other configurations, consult drop-down. Features Light sources Up to 2 light sources simultaneous: blue laser 50 mw @ 488; red laser 25mW @ 638nm Optical Optical system, modular PMT of the selected preamplifier built-in for FSC, SSC, FL1-FL4 Optical filters interchangeable Flow system Bucket of flow of quartz for transport of samples laminar and approach to hydrodynamic processes. Count absolute volumetric true (TVAC) based on the measurement of volume mechanical Syringe pump accuracy computer-controlled, speed continuously adjustable from 0-20 ál / sec. Software CyView, software FCM based on Windows ™ for the acquisition of real-time data, analysis of data in real-time and viewing data in real-time Easy configuration of templates experimental (configuration files) Data format Standard for flow cytometry (FCS) for storage of original data and evaluated

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 500 g), wooden box Number of pi (more)eces in the set: 12 weights 1 g i 2 g – solid masses without adjusting chamber

Scilogex SCI100-Pro Rotary Evaporator w/ Coiled Condenser, 110V Speed Range 20 to 280 RPM Temperatu (more)re Range Ambient to 180C Lift Stroke 150mm Features - Digital display of both rotation speed and heating temperature allows for optimal control of all distillation processes - 5L heating bath with wide temperature range from room temp. to 180C - Patented condenser (cooling surface 1700cm²) with excellent cooling effect - Automatic motor lift releases the evaporating flask to a safe position in case of power failure - Speed range from 20 to 280rpm, and interval operation in clockwise and anti-clockwise directions for drying process - Overheating protection temperature at 220C - Timer function for precise control processing - Chemical-resistant PTFE seals and patented pressure springs provide excellent sealing - Precise temperature control and adjustable safety circuit - Quick release connectors for easy flask removal - Patented double spring sealing ring which is made of PTFE provides excellent sealing performance - Remote function provides PC control and data transmission The Scilogex SCI100-Pro Rotary Evaporator w/ Coiled Condenser features a large easy to read large digital LCD screen displaying the temperature, rotation speed and timer. The display can be removed for remote control purposes. This system features a large 5L water/oil heating bath and has a temperature range from Ambient to 180°C. INCLUDED: The Scilogex SCI100-Pro Rotary Evaporator w/ Coiled Condenser, 110V includes: - Coiled Condenser - 5L Heating Bath - 1L Evaporation Flask - 1L Receiving Flask - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty