2 x Varian VacSorb Pumps Model - 941-6501 w/ Accessories Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and i (more)s ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

The Pfeiffer Vacuum TMH 064 Turbo Pump is designed for a wide range of applications in the research  (more)industry. Features: The pump of explosive gases or corrosive gases. Can be operating where there is a danger of explosion The pumping of gases and vapours which attack the materials of the pumps. Operations with improper gas modes High vacuum flange: ISO-K High vacuum seal: Viton Final pressure: < 1 x 10-8 mbar Flow Rate (N2): 30 l/s Weight: 3.5 kg

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

KNF IP65 UFEM 1.10 KT.18S2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to sui (more)t most laboratory liquid metering and dosing needs. The UFEM 1.10 KT.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: PP head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 KT.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Savant DNA Speed Vac DNA110-230 Concentrator Centrifuge This item was removed from a university lab  (more)where it was surplus to requirements. The concentrator centrifuge powers on and is in good cosmetic condition. Model: DNA110-230Serial No.: DNA110-6D1503

Epsilon 3XLE is a benchtop energy dispersive X-ray fluorescence (EDXRF) spectrometer that is used fo (more)r elemental analysis from carbon (C) to americium (Am) in areas from R&D through to process control. Easy to operate, reliable and highly flexible, it is ideally suited to a broad range of industries and applications. The instrument is powered by the latest advances in excitation and detection technology, delivering excellent analytical performance. The SDDUltra silicon drift detector fitted in Epsilon 3XLE enables ultra light element analysis of even carbon, nitrogen and oxygen. Excluding software

Ohaus Guardian 5000 e-G52HP07C Hotplate, 120V Temperature Range Ambient + 5°C to 550°C Plate Size 7 (more) in x 7 in (18 cm x 18 cm) Temp. Stability +/-1% Plate, below 100°C +/-1°C and +/-0.5% Probe, below 100°C +/-0.5°C Features - Heating capacity up to 550°C for diverse lab applications - Ceramic 7 x 7 inch top plate for consistent heat distribution - Precise temperature stability within +/-1% for reliable results - High-contrast LCD display for clear temperature monitoring - Available Ethernet, USB, and RS232 connectivity options - Certified for safety with CE and TUV approvals - Programmable timer from 1 minute up to 99 hours, 59 minutes - Compact design with dimensions of 12.94 in x 4.56 in x 8.69 in The Ohaus Guardian 5000 e-G52HP07C Hotplate, 120V, delivers precise heating with a powerful ceramic top plate, ideal for laboratory applications requiring consistent temperature control. Designed to reach up to 550°C, this hotplate ensures reliable performance across a variety of tasks, from solution sterilization to pH optimization. Its durable 7 x 7-inch ceramic plate evenly distributes heat, supporting accurate and stable temperatures with +/-1% precision, even for temperature-sensitive procedures. Equipped with a bright, high-contrast LCD display, this model provides clear real-time monitoring, while Ethernet, USB, and RS232 connectivity options streamline data logging and remote operation. Certified for safety with CE and TUV approvals, and designed with a programmable timer up to 99 hours and 59 minutes, the Guardian 5000 e-G52HP07C offers a dependable, user-friendly solution for professional lab environments. INCLUDED: The Ohaus Guardian 5000 e-G52HP07C Hotplate, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA EUROSTAR 60 control Package S001 EUROSTAR 60 control packageThis package for the IKA Eurostar 60 (more) Control Overhead Stirrer includes the EUROSTAR 60 control, R 2723 Telescopic stand, R 271 Boss head clamp, R 1345 Propeller stirrer (4-bladed), and RH 5 Strap clamp. The IKA Eurostar 60 Control is a universal laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts speed through microprocessor-controlled technology within the range of 0/30 - 2000 rpm. The stirrer features RS 232 and USB interfaces for controlling and documenting all parameters. An integrated torque trend display measures viscosity changes. Safety circuits ensure automatic cut-off in case of anti-stall or overload conditions. Continuous comparison of shaft speed to the desired speed is maintained, with automatic adjustments to guarantee constant speed despite viscosity changes in the sample. Key features include a multilingual TFT display, programmable functions, integrated temperature measurement, interval operation, timer function, adjustable safety circuit, locked function, infinitely adjustable speed, push-through agitator shafts, overload protection, short-term overload operation, slim casing, quiet operation, and an error code display.

Hermle 6 x 85ml High Speed "super" rotor (25deg) The Hermle 6 x 85ml High Speed "super" rotor is a h (more)igh-performance centrifuge rotor compatible with Hermle Z32-HK and Z327 series centrifuges. This rotor can accommodate a capacity of up to 6x85ml and has a maximum speed of 11,000 RPM, which can be increased to 13,500 RPM with the Z327-K and Z32-HK centrifuge models only. It generates a maximum relative centrifugal force (RCF) of 13,932 x g, or 20,984 x g with the Z327-K and Z36-HK centrifuge models. The rotor has a maximum radius of 10.3 cm and a 25° angle to ensure proper sample distribution. The "super" designation of this rotor signifies its high speed and capacity, making it an ideal solution for a wide range of applications in research, clinical, and industrial laboratories. INCLUDED: The Hermle 6 x 85ml High Speed "super" rotor (25deg) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty