Watson Marlow 505S Peristaltic Pump

Pharmacia Biotech FPLC System This was removed from a university lab where it was surplus to require (more)ments. The system has been powered up but not tested further. Everything is in reasonable to poor cosmetic condition. All the units plugged into a power strip that supports EU plugs. Included are; 2 x Connectivity Monitor, 004763/System No. 003763, 004518/System No. 0035181 x Pump P-500, 0175171 x Liquid Chromatography Controller LCC-500 Plus, 3315431 x UV-M II, 0045862 x MotorValve MV-71 x 10200 PERSPEX Peristaltic Pump, 5024

Gilson MINIPULS 3 Peristaltic Pump Head, R4HF Four Channel, High Flow The Gilson MINIPULS 3 Peristal (more)tic Pump Head, R4HF Four Channel, High Flow is a versatile high flow pump head with a maximum flow rate of 250 ml/min and a minimum flow rate of 1 ml/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4HF Four Channel, High Flow includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Technical specifications: 220 V, 50 Hz. Housing (D)x(H)x(W): 34 x 12 x 27 cm. See also documentation (more) for additional information.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This item has just arrived in our stock. Please enquire for further details.

IKA C-MAG HS 7 Digital Magnetic Hotplate Stirrer Speed Range 100 to 1,500 rpm Heating Temp. Range (more) 50 to 500°C Stirring Quantity Max. 10 l Features - Powerful motor for stirring quantities of up to 10 l (H2O) - Simultaneous digital display of target and actual temperatures via LCD display - Directly connection for a PT 1000 temperature sensor enable a precise temperature control (included in delivery) - Control accuracy in medium +/- 0,5 K (in combination with PT 1000) - Display of actual temperature value in medium with 0,1 K resolution when using PT 1000 temperature sensor - 3 operating modes to choose (standard, safe, adjustment protection) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-MAG HS 7 Digital Magnetic Hotplate Stirrer is a powerful and precise tool designed for laboratory use. It features one stirring position with a capacity of up to 10 liters of H2O, driven by a robust motor. The LCD display simultaneously shows target and actual temperatures, ensuring accurate monitoring. It includes a PT 1000 temperature sensor for precise control, with an impressive accuracy of +/- 0.5 K. The hotplate offers a heating range of 50 - 500 °C, with a ceramic surface for excellent chemical resistance. Safety is a priority with a fixed safety circuit at 550 °C and a hot surface warning indicator. The elevated control panel protects against spills, enhancing durability and ease of use.

Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite Ob (more)jectives S-APO 5X, 10X, 20X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. - Advanced ergonomic design, compact size, carefully sourced high-quality materials, and versatile digital capabilities ensure minimal operator fatigue during extended periods of operation. The Motic PA53MET-3D is an advanced trinocular metallurgical microscope designed for bright field observation with a 100W halogen lamp and a sophisticated reflected frame for 3D profiling. It features a motorized Z-axis, a 3D control box, and a control pad, along with widefield eyepieces offering 10X magnification and a 25mm field of view. The coded quintuple revolving nosepiece supports bright field observation and includes a slot for Differential Interference Contrast (DIC). Plan S-APO objectives are available in magnifications of 5X, 10X, 20X, and 50X. INCLUDED: The Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO Objectives: 5X, 10X, 20X, & 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Bio-Rad GelAir Drying System The GelAir drying system is perfect for drying polyacrylamide and agaro (more)se gels. Dried between two sheets of cellophane, the gels come out completely clear with a glossy finish, ideal for densitometry, photodocumentation, autoradiography, overheads, and long-term storage. The heated drying chamber works like a convection oven to dry mini gels in 45 minutes or 20×20 cm gels in 60 minutes, rivaling the speed of conventional gel dryers that require a vacuum pump. Drying times may vary depending on percentage and thickness of the gel. The dryer holds up to four drying frames at once. For drying polyacrylamide and agarose gels. Timer control : 0–3 hr, fully adjustable  Function modes : Fan only; fan and heat; off  Dryer capacity : 4 shelves, each accommodating 1 drying frame  Dimensions (WxDxH) : 27x43x30 cm  Weight : 8 kg     GelAir Drying Frames     Inner dimensions : 20×20 cm  Drying frame  Molded polycarbonate bottom frame, stainless-steel top frame  Clamps  Molded polysulfone, 8 clamps per drying frame  Gel capacity : 4 mini (8×7 cm) gels, 2 Criterion™ (13.3×8.7 cm) gels, 1 large (20×20 cm) gel (per frame) This system includes Dryer Frames Clamps Assembly table Cellophane supports

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 mass standard: flat polygonal sheet Nominal value: 100 mg Material: nickel silver F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

PS X7.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X7.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X7.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.