iPump i150 Peristaltic Pump Peristaltische Pumpe + C1 R3 Head 0.006..366 ml/min

For the use in cell biology just use a pump head which features convex rollers and does not squeeze  (more)the tubing as conventional rollers Models features a smooth start operation which prevents spills and splashing media. The speed will ramp up slowly until your set rpm has been reached Safety for continuous operation: the motor will be switched off if a high thermal load situation occurs to prevent accidents Flow rates of 3.6 to 3900 ml/min with single-channel pump heads High speed range from 50 rpm to 600 rpm This pump drive is not suitable for multi-channel operation Speed: 50 – 600 rpm Accuracy speed: ±2 % Dimensions (WxDxH): 166 x 256 x 225 mm Weight: 7.1 kg

The Watson Marlow 405 Pump provides users with digital control over a two-channel precision pump. Th (more)is high flow laboratory pump has a speed range up to 200 rpm with a flow rate up to 370ml/min per channel. This microprocessor controlled, dual channel peristaltic pump is easy to control from the upfront digital keypad, allowing users to start, stop, reverse direction, control speed level, and initiate rapid priming. This digital lab pump is built for use with 1.6 mm tubing in sizes 12, 13, 14, & 16 (0.5 – 64.8 mm bore) and spring-loaded track to maximize tube life and flow precision against pressures up to 2 bar. The pump comes with pumphead designed with twin four roller rotors, spring loaded track, and adjustable occlusion lever allowing two individual channels of flow.

Single-channel peristaltic pump combines reproducible flow rates with simple operation, either as a  (more)standalone unit, or interfaced with programmable fraction collectors. Flow rate: 0.6 – 500 ml/h Work temperature: 0 – 40°C Maximum backpressure: 2 bar Weight: 1.6 kg

Single-channel peristaltic pump combines reproducible flow rates with simple operation, either as a  (more)standalone unit, or interfaced with programmable fraction collectors. Flow rate: 0.6 – 500 ml/h Work temperature: 0 – 40°C Maximum backpressure: 2 bar Weight: 1.6 kg

Gilson MiniPuls 3 peristaltic pump Technical characteristics Voltage: 220-240V, 50/60Hz Power: 45VA  (more)Speed: 0-48 revolutions 8 channels Standard flow rate: 0.3 µL/min – 30 mL/min at maximum pressure 0.5 MPa Pump head speed: adjustable 0 to 48 rpm with increments 0.01 rpm to 9.99 rpm and increments 0.1 rpm to 10 rpm Standard model pipe diameter: 0.25–4 mm (ID) External dimensions (L) x (D) x (H): 15 x 17.5 x 29.5 cm

Maximum Temperature Homogeneity The particular CerAlTop ™ plate, in aluminum alloy coated with a cer (more)amic layer, ensures a formidable temperature homogeneity over the entire surface of the plate itself, up to 370°C and at the same time excellent resistance to chemical agents and ease of cleaning. Fontal panel The control panel is extremely intuitive. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). Maximum Protection, IP 42 AREX magnetic stirrers guarantee a high level of safety and protection for the user, also thanks to the raised control panel and the special channel for conveying liquids (in case of spills). The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Thermoregulation of the liquid being processed For unmatched performance, AREX supports the VTF Fuzzy Logic digital temperature controller. VTF ensures perfect thermoregulations up to 300°C, given the very high level of accuracy of ±0.5°C. In addition, with VTF it is also possible to set the operating time, to better program the temperature control. Low Profile, Attractive Design AREX offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use. AluBlocks ™, Greater Versatility AluBlocks ™ allow you to perform different heating and stirring experiments with unprecedented flexibility, acting on different types and sizes of tubes. Being modular, they are ideal for creating a workstation that is always customized, capable of supporting tubes of different formats. Made entirely of aluminum, they can be easily placed on the round head heating stirrers for excellent heat transmission and temperature homogeneity. A huge leap forward in productivity, while also saving time, money and counter space.

4 measuring channels Weight: 6.3 kg Dimensions (wxhxd): 35.5 x 12 x 45 cm 220-240V, 50-60 Hz, 45 VA, (more) 0.4 Med 6 V See documentation for more information.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW