Gilson MINIPULS 3 Peristaltic Pump Head, R2HF Two Channel, High Flow

This listing is for 1 of 2 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immidate realese. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the benchtop.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pumpheads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pumpheads if lower pulsing is required, or with 313D2 or 314D2 pumpheads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) microcassette pumpheads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pumphead. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

This listing is for 1 of 2 Watson Marlow 520S Peristaltic Pump. The unit is in full working conditi (more)on and is ready for immidate realese. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications.   520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging.   Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 microliters/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

GILSON MiniPuls 3 Peristaltic Pump M312 2 Channels Voltage: 220-240V, 50/60Hz Power: 45VA Speed: 0-4 (more)8 rpm Standard Flow Rate: 0.3 µL/min – 30 mL/min at 0.5 MPa max pressure High Flow Rate: 1 mL/min – 220 mL/min at 0.3 MPa max pressure Pump Head Speed: Adjustable 0 to 48 rpm with 0.01 rpm increments at 9.99 rpm and 0.1 rpm increments at 10 rpm Standard Model Tubing Diameter: 0.25–4 mm (ID) High Flow Tubing Diameter: 2–8 mm (ID) External Dimensions (W) x (D) x (H): 15 x 17.5 x 29.5 cm

Manufacturer: Watson Marlow   Model: 620U/L 265rpm peristaltic pump Technical Data: Protection class (more): 11331 / NEmA 2 Housing: Wipe clean, vented Suitability: Dry industrial environments with non-corrosive atmospheres Humidity: (non-condensing) 80% to 31 C, 88F, linearly decreasing to 50% at 40C, 104F Temperature: up to 40°C (40F to 104F) Control ratio: 2650:1 Rated torque: 6Nm, continuous operation Noise level: < 70dB(A) at 1m distance Power supply: 100-120V/200-240V, 1 ph, 50/60Hz Scope of delivery: - 620U/L 265rpm peristaltic pump - Operating instructions as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Adjustable number of revolutions. Technical specifications: Dimsensions (D)x(H)x(W): 20,3 x 9,7 x 15 (more),3 cm.

Brinkmann CH-500 Column Heater This item was removed from a university lab where it was surplus to  (more)requirements. It is in good cosmetic condition but is missing a screw for the side panel. The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

Hudson Solo SOL9 Liquid Handler This item was removed from a university lab where it was surplus to  (more)requirements. The robot is in very good used condition and has been successfully tested for communication with the includedsoftware. The previous client has confirmed it being in working order. System Includes:- 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU) - 4 x 10cm Tall Nests - 2 x 6cm Tall Nests - 1 x 4.5cm Nest - 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units: - 1 with a TPS 620-5033 plate - 1 with a TPS 620-5045 plate - 2 x PSU's - 1 x BioShake Heated Shaker Plate (marked as faulty) - 2 x Boxes of 1000ul Pipette Tips (all sealed inside) - 1 x Lenovo PC with keyboard, monitor &amp; mouse running Windows 10 with Hudson control software installed - 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

VACUUBRAND Chemistry Diaphragm Pump MD 1C Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz 0.88  (more) cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and ultra low vibration - Proven long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet high requirements regarding ultimate vacuum. The three-stage construction provides the advantageous combination of high pumping speed and deep ultimate vacuum in a pump with a very small footprint. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The MD 1C with gas ballast valve is optimally prepared for pumping easily condensable vapors (high boiling solvents). Three-stage chemistry diaphragm pumps are an excellent solution for applications involving corrosive gases and vapors at high vacuum requirements. Typical applications are vacuum generation at rotary evaporators, vacuum concentrators and many other laboratory applications. Due to their excellent ultimate vacuum they are the ideal solution for evaporation of high boiling solvents even with gas ballast. The MD 1C pump is the heart of a whole line of reliable chemistry pumping units.INCLUDED: The VACUUBRAND Chemistry Diaphragm Pump MD 1C includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris MR9600 SmartReader 96 and MW9600 Smartwasher 96 BundleFeatures - Bundle includes SmartReader (more)96 Microplate absorbance reader and SmartWasher 96 microplate washer - Includes 405, 450, 492, and 630nm filters - features a 7-inch touch screen; SmartWasher has 4.3 LCD display - SmartReader96 operates as a stand alone system, with USB flash drive drive for data transfer - Absorbance range of 0 to 4 Abs - 8 channel vertical optical path with zero dispersion - Precision control of aspiration needle position (Accurate to 0.1mm, Minimal residual liquid, ≤1μl/well) - Auto rinse function eliminates cross contamination - Up to 100 wash protocols can be customized and stored - Liquid level sensors in wash and waste bottles The Accuris SmartReader 96 and SmartWasher 96 bundle is an all-in-one solution for efficient and accurate microplate analysis. The bundle includes the advanced SmartReader96 Microplate Absorbance Reader and the reliable SmartWasher 96 Microplate Washer, providing a comprehensive solution for microplate analysis needs. The SmartReader96 is equipped with multiple wavelength filters, including 405, 450, 492, and 630nm filters, which provide versatile options for various assay needs. It also features a 7-inch touch screen for easy operation and can operate independently with a USB flash drive for seamless data transfer. The absorbance reader has a wide range of 0 to 4 Abs, which accommodates a variety of applications. Additionally, the 8-channel vertical optical path ensures zero dispersion for accurate results. The SmartWasher 96 offers precise control of the aspiration needle position, accurate to 0.1mm, and minimal residual liquid (≤1μl/well) for reliable performance. It also features an auto-rinse function that eliminates cross-contamination, ensuring the integrity of your samples. The SmartWasher 96 allows the storage of up to 100 customized wash protocols, providing maximum flexibility in experiments. Moreover, liquid level sensors in the wash and waste bottles provide real-time monitoring for added convenience. Upgrade your laboratory's microplate analysis capabilities with the Accuris SmartReader 96 and SmartWasher 96 bundle. This comprehensive package delivers high-quality performance, user-friendly operation, and customizable options for all your assay needs. INCLUDED: The Accuris MR9600 SmartReader 96 and MW9600 Smartwasher 96 Bundle includes: - 405, 450, 492 and 630nm filters - Waste and Buffer Bottles - Power Cord - Two Year Manufacturer's Warranty