3 x Kino Flo Diva Lite 201 Lighting Systems

Spinning top lift BOY 08 510.00 PROLABO 20 x 20 cm Lifting support, lifting table for laboratory Tab (more)letop dimensions: 200 x 200 mm With traces of wear

12 Piece Lab Glassware Collection Buchi, Schott Duran, Lenz, Pyrex, Volac This large lot of laborato (more)ry glassware was removed from a university lab where it was surplus to requirements. All items are in good cosmetic condition with no damage present. Includes the following: 1 x Buchi 19/38 2 litre cold trap with inner sleeve1 x small Buchi rotary distillation glass svl22 19cm centre column, 250ml bulb1 x Volac c24/20 2 litre long necked flask2 x Volac c19/17. 1 litre long necked flask1 x Pyrex 2 litre conical flask with top spout outlet1 x Kontes Ultra-Ware 4 litre conical flask with stopper and side outlet1 x Schott Durran 1 litre separatory funnel with tap1 x Schott Durran 500ml separatory funnel with tap1 x Jay Tech 500ml separatory funnel with tap1 x Interfon 500ml separatory funnel with tap1 x Interkey 500ml column

HTA Xdc-96pro HT112E Automated Capper for 96 Well Format Sample Storage Tubes This was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and runs through the start sequence without fault. It is in good cosmetic condition with marks from use.

This Irori AccuTag 100 Scanning Station  Model: At-100-CS-CE was removed from a university lab  (more)where it was surplus to requirements. The item is in reasonable cosmetic condition. There are scratches/dents on the surface, along with stains. The accessories have been used and thus have broken seals. The item was plugged in, but there wasn't any clear indication it had powered on. We were unable to test it further without a PC connection. Also included are the following:1x AccuTag Synthesis Manager Version 1.01x AccuTag Synthesis Manager Version 2.2612x Irori Radio Frequency Tag1x PSU1x DE-9 cable

Thermo Scientific Thermo 10 Liquid Nitrogen Transfer Vessel. Designed for storing and dispensing sma (more)ll quantities of liquid nitrogen. 10 L capacity. Static evaporation rate 0.18 L/day. Inner neck diameter 5.6 cm. Outer height 54.6 mm. Diameter 26.2 cm. Weight 5.9 kg. Discover the Thermo Scientific Thermo 10 Liquid Nitrogen Transfer Container at Galileo Equipment! Designed to safely and efficiently store and transfer liquid nitrogen, this high-quality, overhauled equipment offers excellent value for money. Its robust and reliable design ensures optimal preservation and handling of liquid nitrogen, guaranteeing long-lasting performance. Ideal for maximizing safety and efficiency in laboratory processes, the Thermo 10 is a smart investment. Visit our website and get yours today at Galileo Equipment!

4 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house four easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunological analyzes, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) Technical Specifications

HERMLE ZK-401 Refrigerated High Performance Centrifuge Maximum speed: 24,000 rpm Max. centrifugal fo (more)rce : 70,965 g (depending on rotor) Maximum filling quantity: 3000.0 ml (with suitable rotor) Power supply: 380V/50 Hz (CEE32 socket) 19.5A 11.0kVA Three-phase Dimensions: L x W x H = (825 x 765 x 940) mm Mass: approximately 320 kg Sound level: 69 dB(A) Setting temperature range: -20ºC to +40ºC Year of manufacture: 1990 Operating hours: 1403h With 5 rotors (4 fixed angular + 1 rotor with oscillating buckets): 2 X Fixed Rotor A12.17 Max speed: 16500 rpm For 12 tubes 1 X Fixed Rotor A6.14 Max speed: 14400 rpm For 6 tubes 1 X Fixed Rotor A8.24 Max speed: 24000 rpm For 8 tubes Equipment tested: 10000 revolutions => OK Cold group => OK Note: Commissioning must be carried out by a technician specialized in this type of high performance centrifuge

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

Erlab Captair Store Ministore 822D Chemical Storage Safety Cabinet This was removed from a universit (more)y lab where it was surplus to requirements. The item powers on and appears to be in working condition with the fan running and air flowing from the top of the unit. It is in good cosmetic condition with only minor marks from use. Internal dimensions - D32 W40.5 H56cm (each side)Shelf 32 x 40.5cm (each side)

This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks from use.

IKA R 3000.1 Moebius stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel F (more)eatures - Generates axial flow, drawing material from above for effective mixing - Ideal for circulating and handling low to medium viscous liquids - Made of AISI 316L / 1.4571 stainless steel for durability and resistance - Designed to work within an ambient temperature range of 5 - 40 °C - Operates at medium speeds with a maximum of ≤ 800 rpm The R 3000.1 Moebius stirrer is engineered to generate axial flow, skillfully drawing materials from above to ensure thorough mixing and circulation of low to medium viscous liquids. With a 100 mm diameter and a 565 mm shaft, it's perfectly suited for a variety of laboratory applications, operating effectively at medium speeds up to 800 rpm. Constructed from high-quality AISI 316L / 1.4571 stainless steel, it combines resilience with corrosion resistance. Weighing 0.592 kg and designed to function within a 5 - 40 °C ambient temperature range, this stirrer balances performance with durability for reliable everyday use.INCLUDED: The IKA R 3000.1 Moebius stirrer includes: - IKA R 3000.1 Moebius stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty