Radwag Reference Material Sodium Chloride

This listing is for a Vibra HTR-220E Balance

This listing is for a Analytical 200g Weight. The unit is in full working condition and is ready fo (more)r immediate release. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

F1 Mass Standard - knob weights, service case. Nominal value - 250 kg.

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 50 g), plastic box Number of p (more)ieces in the set: 20 Weights 1 g i 2 g – solid masses without adjusting chamber

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

This item has just arrived in our stock. Please enquire for further details.

Hermle 4 x 50ml conical swing out rotor for Z287-A The Hermle 4 x 50ml conical swing out rotor for Z (more)287-A is a reliable and efficient solution for processing large-volume samples in a swing-out rotor configuration. This rotor is compatible with the Hermle Z287-A series centrifuges, making it an excellent addition to any laboratory that uses these centrifuges. The rotor can hold up to 4 x 50ml conical tubes, providing a total capacity of 200ml per run. With a maximum speed of 5,000 RPM and a maximum relative centrifugal force (RCF) of 3,633 x g, this rotor ensures fast and efficient processing of samples. The swing-out configuration of the rotor allows for easy loading and unloading of samples, making it a convenient and user-friendly tool for sample processing. Overall, the Hermle 4 x 50ml conical swing out rotor for Z287-A is a versatile and reliable tool for laboratories that require efficient and high-capacity sample processing. INCLUDED: The Hermle 4 x 50ml conical swing out rotor for Z287-A includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Stirling Ultracold SU105UE Ultra-Low Undercounter FreezerFeatures - Advanced Stirling engine reliabi (more)lity maximizes sample storage in a compact footprint without sacrificing performance - Upright design can be stacked or placed undercounter for convenient access when space is limited - Perfect for controlled temperature transitioning within the widest range of set point temperatures, -20°C to -86°C - Lowest energy consumption in its class for greater operational savings, <4 kWh/day at -80°C - Universal power adaptation accepts electrical input from any outlet, around the world - Optional SenseAnywhere wireless temperature logging allows for remote monitoring via cloud-based software - Environmentally friendly design uses only 100% natural refrigerants - Designed for ultra-low power consumption and maximal energy savings - Virtually eliminates any need for maintenance with breakthrough Stirling free-piston engine - Uses 100% natural refrigerants for reduced climate impact for cooling The Stirling Ultracold SU105UE Ultra-Low Undercounter Freezer is a compact ultra-low temperature freezer that is ideal for personal storage and situations where larger volume ULT freezers might otherwise remain half empty. The SU105UE delivers full performance ultra-low storage for undercounter, benchtop or stacked installation. These undercounter freezers feature a 105L (3.7 cu. ft.) cabinet that delivers stable, uniform -20°C to -86°C storage at a fraction of the operating cost of conventional cascade refrigeration systems. The SU105UE combines the performance of a unique free-piston Stirling engine with an efficient, thin-wall, non-CFC urethane foam and vacuum insulated cabinet. This permits high-performance, ultra-low temperature storage capacity in an undercounter, benchtop, or stacked cabinet configuration. The Stirling integral control, alarm, and monitoring system includes an intuitive graphic user interface to display operating temperature, reserve cooling capacity, status functions, and performance metrics for field troubleshooting. Secure touchpad inputs permit access to and programming for all control functions and alarm setpoints. Using 100% natural refrigerants, the Stirling Ultracold SU105UE Undercounter Freezer stores more samples in a smaller footprint than comparable models. INCLUDED: The Stirling Ultracold SU105UE Ultra-Low Undercounter Freezer includes: - 1 Shelf - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Stirling Ultracold SU105UE Ultra-Low Undercounter Freezer SpecificationsTemperature Range-20°C to -86°C, adjustable in 1°C incrementsVolume105L (3.7 cu. ft.)Cooling EngineHelium charged free-piston Stirling engine with continuous modulationHeat Transport SystemGravity driven thermosiphonRefrigerantR-170 (Ethane) 30-33 gramsEvaporatorCold wall (inner liner)Heat RejectionFinned heat exchanger with forced air coolingAir inlet: above freezer door, below mechanical compartmentAir outlet: underneath or rear right corner bottomDefrost MethodManualController TypeMicroprocessor with touchscreen input and displayWarm and Cold AlarmsFully adjustable by userTemperature Log30 days available graphicallyBattery Back-up12-hour control battery back-up for touchscreenEnergy Use4 kWh/day at -80°CPull Down from 25°C Ambient9 hours to -80°C (empty cabinet)Recovery from Door Opening40 minutes to -80°CWarm-up Profile2 hours to -60°C at -80°C (empty cabinet)5.2 hours to -40°C at -80°C (empty cabinet)Heat Dissipation563 BTU/hr (load to HVAC) at -80°C (empty cabinet)Interior Dimensions (H x D x W)21 x 17 x 18 in. (53.3 x 43.2 x 45.7 cm)Exterior Dimensions (H x D x W)34 x 28 x 27 in. (86.4 x 71.1 x 68.6 cm)Weight220 lb. (100 kg.)Electrical Requirements100 - 240V, 50/60Hz, 300W

IKA C 3000 Automated Calorimeter Package 2/10 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling by touch screen operation or a standard USB mouse - Two different starting temperatures to choose from (22°C, 30°C) - Automatic ignition, automatic water filling and draining, automatic oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analyses - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new upside down crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 2/10 is an advanced isoperibol calorimeter engineered to deliver precise calorific value measurements with exceptional ease of use. Featuring touch screen control or the option to operate with a standard USB mouse, this calorimeter simplifies workflow while maintaining accuracy. Fully automated processes, including ignition, water handling, and oxygen filling, significantly reduce preparation time and user intervention, making it an ideal choice for both industrial and research laboratories. Designed for flexibility and efficiency, the C 3000 allows users to select between two starting temperatures (22°C and 30°C) and offers up to six dynamic or four isoperibol measurements per hour. With six temperature sensors ensuring precise monitoring, a spherically shaped decomposition vessel for superior pressure stability and heat transfer, and the innovative upside-down crucible holder technology for easy sample preparation, the C 3000 delivers consistent and reproducible results. It achieves 0.15% RSD in dynamic mode and 0.05% RSD in isoperibol mode, ensuring accuracy for high-stakes analyses. Equipped with multiple connectivity options—including Ethernet, RS232, USB, and an SD card slot—this calorimeter streamlines data management and integration. Compatible with the RC 2 Basic Recirculating Chiller (sold separately), it ensures optimal cooling efficiency during extended use. With compact dimensions of 19.7 x 16.7 x 17.7 inches and a robust weight of 63.9 pounds, the IKA C 3000 Automated Calorimeter Package 2/10 is built for reliability and performance in demanding laboratory environments. This package includes the C 3000 measuring cell, a C 6010 standard decomposition vessel, and wear parts and consumables for up to 500 tests, ensuring a seamless start to your calorimetric operations. INCLUDED: The IKA C 3000 Automated Calorimeter Package 2/10 includes: - C 3000 Measuring Cell - C 6010 decomposition Vessel, Standard - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Bruker LUMOS is a fully automated stand-alone FTIR microscope with an 8x objective and can be us (more)ed in transmission, reflection and ATR mode. The measurement results in a single file including visible images, spectral data and sample information. For evaluation and visualization of the microscopic data the software provides powerful and intuitive Chemical Imaging functionality. The LUMOS is a stand-alone FT-IR microscope with an integrated FT-IR spectrometer perfectly matched into its optical design. All components are motorized and electronically coded. The innovation of a motorized ATR-crystal allows the system to switch from transmission or reflection to ATR mode without interaction of the operator, and to measure fully automated sample and background spectra even in ATR mode. The heart of each FT-IR spectrometer is the interferometer. The LUMOS uses a patented, permanently aligned RockSolid interferometer being extremely insensitive against mirror tilts, vibrations and thermal effects. 8x objective for automated measurements in transmission, reflection and ATR Magnification can be increased to 32x by digital zooming Image capture by highly resolving digital CCD camera Motorized Germanium ATR crystal with internal pressure control Motorized sample stage Motorized z-drive All IR-transparent windows and the IR beam splitter are made of ZnSe providing robustness even against high humidity High sensitive photoconductive MCT detector Including PC with software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW