Products

The testo 905-T2 surface thermometer is the best tool for measuring the temperature on both smooth a (more)nd uneven surfaces. This is because its temperature probe (type K thermocouple) has a measuring head with a spring-loaded thermocouple strip that fits to the surface. This method avoids having to tilt the probe, which leads to incorrect measurements. Another advantage of this probe is the measurement speed. So not only a great precision, ± (1°C ± 1% of mv), but an extraordinarily fast response time: t₉₉ = 5 s. The testo 905-T2 surface thermometer also convinces with its large measuring range from -50 to +350°C. Measurements up to +500°C are also possible for a short time (1 to 2 minutes). This means that the same tool can be used for different applications, eg. in the field of heating, plumbing or refrigeration technology. In addition, the surface thermometer is particularly suited to temperature measurements on pipes, as its thermocouple probe is easily able to cope with their uneven surfaces.   EXTREMELY EASY TO USE Too easy: The measured values ​​can be read comfortably on the clear display, which can be read from different angles, thanks to the swivel joint which can be constantly adjusted to the viewing angle. If you forget to switch off the surface thermometer after the measurement, it will switch off automatically after approx. 10 minutes of non-use. You will receive: Surface thermometer with cross band probe, clip attachment, battery.

The temperature measurement is an operation that must be carried out daily in compliance with the HA (more)CCP standards. Only thanks to reliable tools is it possible to monitor and guarantee the quality of your products. The testo 108-2 thermometer takes measurements in a few seconds and thanks to the possibility of connecting different probes, it becomes a tool to be used in multiple ways: during transport and storage, in restaurants, in large kitchens and for checking frozen goods. Benefits: - Probe with safety lock - Auto-hold, hold and min./max. Functions - Can be used for the entire cold chain - Handy and simple to use - Softcase case to avoid damaging the probe - Large display Order content: Testo 108-2, lockable probe, soft case, batteries and calibration protocol.

Infrared thermometer with circular laser ScanTemp 485 professional Dostmann Infrared thermometers us (more)e this technology to measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Precision glass optics for accurate non-contact temperature measurement - Optical resolution 20: 1 - DoubleLaser sighting with narrow beam targeting for accurate readings - High / low audible alarm adjustable Application: Detect problems with keeping a process at temperature Food safety (HACCP) HVAC Electrical maintenance Intangible parts (fresh paint) Road construction Commercial printing Plastic molding Car maintenance Technical features Temperature range: -50°C ... +800°C Accuracy: ± 2.0% or ± 2°C Spectral response: 8 - 14 µm Measurement time: about 0.2s Display resolution: 0.1°C (LCD) Working temperature: 0°C ... 50°C Emissivity: 0.10-1.00 Distance - spot size: 20: 1 Signal processing: Min / Max / Scan / Hold / Ems / °C / °F Backlight: Yes Alarm: high / low visual and acoustic Laser: <1mW Laser class IIa Power supply: 9V alkaline battery Battery life: 20 hours with 50% laser and backlight; 40 hours with laser e backlight off Dimensions (L x W x H): 146x104x43 mm Weight: 450g

Professional infrared thermometer ScanTemp 490 Dostmann professionalInfrared thermometers use this t (more)echnology to measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Non-contact measurement with input for K-type thermocouple probes - Large display: simultaneous display of Max / Min or Alarm temperature detected - With laser point and backlight - Resolution 50: 1 - Wide range of temperatures: infrared -60 ... +1000°C; thermocouple -64 ... +1400°C - HOLD-, MAX-, MIN-, DIF-, AVG function - Adjustable emissivity - Alarm function, audible and optical - Lockmode for continuous measurements Application: - Moving parts - Temperature of gears and motors - Detect problems with keeping a process at temperature - Food safety (HACCP) - HVAC - Electrical maintenance - Intangible parts (fresh paint) - Road construction - Commercial printing - Plastic molding - Car maintenance Technical features Temperature range: -60°C ... +1000°C (with thermocouple -64 ... + 1400°C) Accuracy: ± 2.0% or ± 2 ° C (thermocouple ± 1.0% or ± 1°C) Spectral response: 6 - 14 µm Measurement time: about 0.2s Display resolution: 0.1°C (LCD) Working temperature: 0°C ... 50°C Distance - spot size: 50: 1 Power supply: 2 x 1.5 volts AAA Battery life: approximately 40 hours of operation Dimensions (L x W x H): 215 x 145 x 45 mm Weight: 1150g

Dostmann professional infrared thermometer ScanTemp 450 Infrared thermometers use this technology to (more) measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Type K thermocouple probe input - Wide range of temperatures: - Infrared: -60 ... +500°C - Thermocouple: -64 ... +1400°C - With circular laser sight - Large display with simultaneous display of reading and Max / Min or Alarm - Belt bag included - HOLD-MAX / MIN / DIF / AVG function (keeps various measurements on the display, such as maximum and minimum) - Tatso lock function for continuous measurement Application: Detect problems with keeping a process at temperature Food safety (HACCP) HVAC Electrical maintenance Intangible parts (fresh paint) Road construction Commercial printing Plastic molding Car maintenance Technical features Temperature range: -60°C ... +500°C, (thermocouple input: -64 ... +1400°C) Accuracy: ± 2.0% of reading or ±2°C, whichever is greater Spectral response: 6 - 14 µm Display resolution: 0.1°C (above 200°: 1°) Working temperature: 0°C ... 50°C Distance - spot size: 11:1 Power supply: 2 AAA batteries, with about 270 hours of operation Dimensions (L x W x H): 175.2 x 39 x 7.9 mm Weight: 140g

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. The Explorer series includes three high-capacity precision models with capacities up to 35 kg. Same functions as all other Explorers, such as AutoCal ™ and 1 second stabilization time. - The display can be separated from the base by up to 5 feet (1.5 meters) to fit operational needs in almost any workspace. A 27 foot (9 meter) cable is also available. when additional flexibility is needed. - Die-cast metal base and 377 × 311mm stainless steel stand base, the Explorer High Capacity is built to withstand everyday use Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Bench scale Defender 3000 i-D33 in Ohaus stainless steel Ideal for general weighing, simple counting (more) and checkweighing applications in humid environments or when frequent cleaning of environments is required. The Defender 3000 Series features a simple yet rugged stainless steel design and an IP67 stainless steel gauge with tactile keys, multi-color backlit LCD display, standard AC power or rechargeable battery operation, and flexible mounting options. In weight control mode, the display changes color (yellow / green / red) to alert the user when it is within the target weight range. Applications Weighing, weight control, counting, totalization Display 7-segment LCD with multicolor backlight Operation AC power cord (supplied) or rechargeable battery (supplied) Communication RS232 interface included and optionally USB Device or Ethernet for printing or data connectivity. Structure 304 stainless steel platform and frame, stainless steel IP66 gauge, stainless steel IP67 load cell, non-slip rubber adjustable feet Construction features Overload protection up to 150% of range